How do I Poster print with photosmart 7520

I am a poster designer and I have used poster printing with all of my Hp printers, but my Hp Photosmart 7520. How do I Poster print with photosmart 7520 using eprint and if not can I use use the USB cord instead for poster printing?
This question was solved.
View Solution.

The steps are quite the same, beside one different step during the dialog:
From Devices and Printers click the Add  a Printer button, then select a Local Printer.
Keep the preseleted LPT port amd click on Next.
Select HP from the Manufacturer pane and then select the HP Deskjet 6940 Series from the Printers list.
Note: if the model is not listed, click the Windows Update button, allow it several minutes to complete and then it should be listed.
Finish the Wizard and confirm the changes.
Right click teh newly added 6940 and select Printer Porperties, open the ports tab and select the port with the otiginal printer model listed within the Printer column (e.g. HP Photosmart 7520), then click on OK.
Poster Printing should now be available within the Finishing tab (Under Pages per sheet and Posters) by using the HP Deskjet 6940 printer.
Please let me know of any issue,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Can I Air Print with Photosmart C4180?

    How Can I Air Print with Photosmart C4180?

    Take a look at this link.  It will give you information on the options you have
    http://www8.hp.com/us/en/support-topics/mobile-printing/how-to-print-mobile-devices-ipad-iphone.html
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

  • How can i poster print using my officejet pro 8600plus? my 8500 had this feature.

    how can i poster print using my officejet pro 8600plus? my 8500 had this feature.
    This question was solved.
    View Solution.

    Yes, the Officejet 8500 driver works with full capability on the Officejet 8600.
    You do not delete the 8600 port, you just right click on the Officejet 8600, select Printer Properties, Ports and just find which port the 8600 is using.  After you write this down click Cancel to exit this part.  I would suggest you leave the Officejet 8600 driver installed, you can install the version with the Officejet 8500 driver and just select the printer you want at print time.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How to turn of two-sided printing on Photosmart 7520

    How do you turn off the automatic 2-sided printing on the Photosmart 7520?

    Hi,
    For Windows, please
    (a) Double clickk Printer icon on desktop,
    (b) Click Set Preferences,
    (c) Select Print both sides (normally Flip Long Edge for portrait):
    (d) Click Save/Apply
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Slow scanning with photosmart 7520

    I am scanning a bunch of old photos for a collage.   Often you hear the scanner quickly scan the photo.  Then it gets hung up for a long time showing a partial of the photo and a box that says "scanning" and a green progress bar.  Sometimes it hangs up for 1 - 2 minutes.  Some pictures only a few seconds.  They are all about the same size photos.  I am scanning on 200 dpi.  Why does it take so much longer on most of the photos?

    Hello @rmayes,
    Welcome to the HP Support Forums!
    I understand that you're experiencing a slow scanning issue when scanning from your HP Photosmart 7520 e-All-in-One Printer to your Windows 7 computer. I would like to assist you today with resolving this issue. Thank you for including that you are scanning your photos on 200 dpi. Rather than a printer, driver, or software issue I do believe that we're dealing with a connectivity issue or a firewall issue. When you print only 1-way communication is used. The computer sends the print command to the printer and the printer will then print the job. However, when you scan 2-way communication is required as the computer and printer send the scanned data back and forth until the full image is on the computer for you to work with. Because of this slow scanning issue I believe that something is interfering with the 2-way communication.
    In order to provide you with accurate support I will need to clarify how your HP Photosmart is connected to your computer (USB, Wireless)?
    In the meantime, I am going to have you run an MSConfig on your computer. This will allow us to temporarily disable all the background programs from running on your computer. Once the background programs are temporarily disabled I will have you test scanning again to verify if the speeds are faster. If the speed is faster with the background programs disabled than that will tell us that there is definitely a program on your computer causing this issue. Please follow the steps below.
    Click on your Start menu
    In the 'search programs and files' box right above Start, type msconfig and hit enter on your keyboard
    When the System Configuration Window opens select 'Selective Startup' and uncheck Load Startup Items
    Click the Services tab. Check the box at the bottom for Hide All Microsoft Services
    Select Disable All
    Select Apply and OK
    Restart your computer when prompted
    Once your computer comes back on please test scanning again.
    Please respond to this post with the result of running the MSConfig. Should the issue persist be sure to let me know how your printer is connected to your computer. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • How to install driver for HP photosmart 7520 on MacOSX 10.5.8???

    My husband does basic printing of documents.  His computer is a MAC OSX 10.5.8.   We have a new HP Photosmart 7520 printer which requires 10.6 minimum. 
    Is it possible to get a driver for this printer for him, that will allow him to access the printer, without getting a new computer!!  ??  To simply be able to print and fax and scan.. he rarely does photos. 
    Please Help, as of course, he is quite frustrated, and as a result, so am I!!
    Thanks.

    Hi grammaglenys,
    Welcome to the HP Forums! I see that you having trouble installing drivers with your printer. It is true that this printer only supports Mac OS X 10.6 as the minimum requirement for the HP Photosmart 7520.
    As the Operating System is older than when the printer came out, there currently isn't a driver available. However, here is a list of printers that can be used with Mac OS X 10.5.8. Archived - Mac OS X 10.5.3: Printer drivers included in the HP Printer Driver Update v1.1.1. Or you can try upgrading the Operating System to Mac OS X 10.6.
    Hope this answers your question, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How to connect to the HP Photosmart 7520?

    How do I connect my Mac to the HP Photosmart 7520?  I've been trying to do this all afternoon.
    Error message is Setting up Photosmart 7520 Series [D52F8A]
    The software fo this printer is currently unavailable.  lase the printer's manufacturer for the latest software."
    I realize that I should contact HP.  Have you ever tried to that?  I've written in capital letters over and over.

    I am having the exact same problem. I have downloaded the HP software for OSX. But, when I install it, and the system asks me to add the printer, the dialogue goes out to Apple's site and comes back with:
    Setting up Photosmart 7520 series The software for this printer is currently unavailable. Please contact the printer's manufacturer for the latest software.
    I cannot get it to find the HP software that has been loaded.
    Any ideas?

  • Cloud print with photosmart 7510

    How do I connect my hp 7510 to cloud print

    Hi @pdunlap
    Welcome to the HP Support Forums.  I see that you would like to learn how to setup your Photosmart 7510 printer to work with Google Cloud Print.
    I am presuming that the printer is already connected to your wireless network and that you have setup the ePrint feature of the printer.  Please follow the steps in the Using Google Cloud Print with your HP Printer document, following the steps in the section titled “HP ePrint-enabled printers”.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How Can I Share Printer with 2 Older Macs?

    I would appreciate detailed guidance on how to set up printer sharing for two older Macs - assuming that this is even possible in this case. I have the following Macs that work very well independently as well as through a router for internet access.
    1. MacMini, 1.5 GHz, Bluetooth+Airport Extreme (approx. 3 yrs old) running OS X 10.5.2 and using Airport for internet access.
    2. Power Mac G4, 466 MHz (approx. 7 yrs old) running OS X 10.3.9 and connected directly to the router for internet access.
    An HP Deskjet 5940 printer was used exclusively with the MacMini, and a Lexmarl Z53 was used exclusively with the G4. The Z53 just reached the end of its life, and thus I disconnected the 5940 from the MacMini and connected it to the G4 where it now works fine.
    In spite of all attempts with various settings at each Mac, I have not been able to get any printing done from the MacMini. What detailed settings/connections do I need to make so that I can use that 5940 printer from the MacMini?
    Thanks for your response.

    Please note that I reposted my question to the following category where I have already received suggestions:
    Mac OS X v10.3 Panther & earlier > Printing & Faxing > "Can I Share a Printer Between OS X 10.3.9 and 10.5.2?"

  • How to Use Web Printing with Microsoft Excel

    Hello,
    In the recent How to paper on Use Web Printing with Microsoft Excel, describes few ABAP classes and methods. Can those classes be modified  to access much more Microsoft excel objects , such as Macro ? Does any body has tried in those lines ? Any suggestions is eagerly awaited.
    regs
    D Bret

    Hi BW people,
    Since we want to modify our reports for printing (and the How-To about enhancement of web printing does not really answer to our requirements) it seems that the Excel alternative is just what we were looking for.
    Unfortunately I have been working with these classes for 6 hours now to get a very simple Excel file, but without success. I did fix the bug like Thomas Kauffman told on the forum, changed the dataprovider and prefixes and I followed every single step of the How-To document(also the check of folder options to open/save the .xls file),... The only thing that happens: the URL has changed (bookmark) and the page is reloaded again.
    So no Excel file, neither a dialogue box. I also walked -a very long time- through the code (in debugging mode) starting from ZCL_RSR_XLS_HELP_WINDOW_PRINT->PROCESS_CMD but I can't find anything!
    Is there anybody with the same problem and -better- with a possible solution to it?
    Thank you very much in advance!

  • Why won't my computer connect to my wireless printer (HP Photosmart 7520)?

    Ever since getting the printer, my laptop has always been able to send things to the printer with absolutely no problem. As far as I know, it works because the printer is connected to the same wireless network as my computer.
    However, none of my colleagues are able to print, despite being connected to the same network. 
    Is there something else they need to do? A lot of the time, the printer is not even showing up on their drop down box (when they try to print in microsoft word for example), but it always does on mine, and we are all on the same wireless network.
    Any ideas?! 
    This question was solved.
    View Solution.

    For issues with Mac I would suggest posting in the Mac Printing and Scanning forum here.  Be sure to mention the printer model and also what version of OS X the users have.
    Drivers for Max OS 10.6 to 10.9 are available from HP's site here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Color scanning problem with Photosmart 7520

    I can not get my new Photosmart 7520 to scan in color. 
    The device scans to PDF, sending the file directly to my Mac computer but when I open the file the document is in b/w.
    Everything else about the process works fine.
    What should I do to capture color?
    This question was solved.
    View Solution.

    Hi Magnusho,
    Im suspecting that the default mode for the PDF is Grayscale/Black and White. To verify this, follow steps below:
    1. Double click /Applications/Hewlett-Packard/HP Utility
    2. Click "Scan to computer"
    3. Click "Edit Scan Task..." button
    4. Hp Scan wil launch and will open Preferences window
    5. Select "Document (PDF)" or shortcuts that contains PDF
    6. Click "Edit" button.
    7. Click "Show Details" button. Scan Presets will display.
    8.Check the Mode?
    If the mode is in "Grayscale/Black and White" then thats the reason why the scan output is not color. If you want colored scan output, change the mode to Color. Then click "OK" button.
    Try scanning again.
    If this does not help you, please update me.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the left to say “Thanks” for helping!

  • Do let me know how to connect cloud print with hp laserjet 1320n

    sir kindly do letme know the procedure ....to print with hp laserjet1320n. in cloud print..without physical connection..

    Hi Ajmir,
    This specific model dont support ePrint Feature. 
    Kind Regards,
    Oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • How do I connect a HP Photosmart 7520 to my MacBook Pro?

    Having an issue connecting my wireless HP Photosmart 7520 to my Macbook. Anyone have any advice?

    I have installed software similar to what I've been using for years to communicate with the same device hooked up on PCs. Even through that software I get the message that I can only connect with bluetooth, PDA, modem ect.
    Is there some generic software or specific to the device you refer to? I've also installed this device on Mac's in the past, through the same software.

  • Poster printing with 4315v

    I have a 4315v that i am attempting to print a 1 page wiring diagram onto 4 sheets. i have followed the instructions for doing this but i can't get it to print.
    with the document on my screen i click file, then print, then i click on properties and then the finishing tab. in the pages per sheet box i click 2X2 which should be 4 pages. i then click ok and then click print. after i click print a page comes up and asks where i want to save it to. all of the available spaces are desktop items. i even saved it to my desktop but i can't print it from there either. my computer is a dell inspiron 530. will the 4315v print posters?
    thanks
    dwon

    hello again,
    after going through thi procedure several times i noticed the "PRINT TO FILE " box was checked. after un-checking this box i was able to print posters using the 2X2 or 3X3. the prints came out fine.
    thanks, dwon

Maybe you are looking for