How do I prepare a FCP Quicktime movie for iDVD?

Hi out there, can someone please explaine in detail what I have to do to a FCP Quicktime movie to prepare it for iDVD. Its 12 minutes long and 4.8GB. I tried putting it as is into iDVD and burning a DVD and the quality was bad. Do I have to put it through Compressor? Or, should I make a different kind of Quicktime movie?

Compressor is a program and you want to use it to convert your movie into an mpeg file and an ac3 file. 2 files to drop into your DVD program. Now, I haven't used iDVD so i don't know what it's asking for but. DVDSP is really easy to use if you just wan tto make a DVD without a menu. this requires an mpeg2 file and ac3. this you can make in compressor. in FCP have your timeline with your sequence in it active. FILE>EXPORT>USING COMPRESSOR. in compressor you can use the DVD 90 minute setting to make these two files. you have to check the manual cause it's different on how to do this with diff versions.
once you have your files drop them in DVD SP asset box then drag them in the timeline. delete the menue blue box right click the green track box, select 'first play' build/burn button at the top and you're on your way.
sorry if this seems confusing, but dvd technology is funky. idvd is great for making easy template menus but if you want to just make a playable dvd wihtout menus, DVD SP is the way to go.

Similar Messages

Preparing my FCP Quicktime movie for iDVD

Hi out there, can someone please explaine in detail what I have to do to a FCP Quicktime movie to prepare it for iDVD. Its 12 minutes long and 4.8GB. I tried putting it as is into iDVD and burning a DVD and the quality was bad. I presume I have to put it through Compressor?

How did you export the movie in the first place? Did you choose Quicktime Movie or Quicktime Conversion?
jk

How do I prepare a FCP Quicktime movie for DVDSP?

Hi there, I'm a beginner at FCP and have a deadline of the morning to supply to a client a DVD with two videos I have just finished. My editor is sick. Could someone please take me through each step. I have produced FCP Quicktime videos of each film which are sitting on the desktop. I have dragged them both into Compressor but its asking me to "Drag Settings and Destinations Here" I don't know what setting and destinations they mean. Also, can you lead me on from there, please........

http://discussions.apple.com/thread.jspa?threadID=1285710&tstart=0
Alberto

How can I tell if the quicktime movie I export from Final Cut Express through Quicktime to IDVD is anamorphic

How can I tell if the quicktime movie I export from Final Cut Express through Quicktime to IDVD is anamorphic

Find the Seuence icon in the Browser that corresponds to the Timeline.
Right click the Sequence icon in the Browser.
Select Item Properties.
All info is revealed.
Al

How to compress a quicktime movie for youtube

how do you compress a quicktime movie for youtube?
dimensions: 1920 x 1080
codecs: apple prores 422, linear pcm
Color profiles: hd (1-1-1)
duration: 4:05
total bit rate: 98,422
i tried just directly uploading and it said upload time was 680 minutes....
..also when i play it on quicktime it is choppy. why is that?

Setting from the horses mouth (so to speak)
File format and editing tips for Apple users

How to export a Quicktime movie from IDVD ?

How to export a Quicktime movie from IDVD ?

Do you have a DVD that you want to get the video from? Is it a commercial DVD or one that you created yourself?
OT

Problem with split screen quicktime movie to iDVD

hey folks, i've just spent two 6-hour renderings for naught and have the following problem:
QT Pro 6.5.2
iDVD 5
OS 10.3.9
I pulled together a Quicktime movie consisting of talking head interview, then split screen (two clips simultaneously), back to talking head, then split screen again, etc etc.
the first time i rendered the composite Quicktime movie to iDVD, my split screen background was a sickly lime green color. blech
so, i added a black slide in TIFF format ONLY to the split screen video portions. played around with the Layers property until my split screen video clips were in front of the black background. recut and pasted my full Quicktime movie again.
However, upon my second iDVD rendering, a funny thing ocurred. Now, when the DVD gets to a split screen portion, the VERY LAST FRAME OF THE PREVIOUS TALKING HEAD CLIP freezes, and appears in the background of my split screen clips.
What gives?
I plan to do some testing, but sure would like to shortcut this problem, it's eating away at my weekend and i need to get this project done.
thanks for any insight you can give
mike

Some ideas given in your iDVD post:
http://discussions.apple.com/thread.jspa?threadID=958281&tstart=0

Help Please ::: Quicktime .mov into iDVD 5 playback or encode problem issue

Originally Imageready files burned into Quicktime. Importing Quicktime .mov into iDVD results in project which looked great in preview, but after burning images were elongated, flattened. I am stumped, especially given preview results would indicate no such problems but unsure where to analyze on the DVD burn end to check. Any tips on what/where to check? Have tried re-importing original ImageReady (Photoshop) files into new Quicktime .mov (original project was done on OS 9 fyi). But no change in results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

Thank you for the feedback. I wasn't privy to the process that converted these files originally but suspected the theory on compression/codec initially used.. may re-convert. Also will try Disk Imaging... seems that this is not an uncommon problem in the iDVD 5 world...
regards, Senor Peaches
Originally Imageready files burned into Quicktime.
Importing Quicktime .mov into iDVD results in project
which looked great in preview, but after burning
images were elongated, flattened. I am stumped,
especially given preview results would indicate no
such problems but unsure where to analyze on the DVD
burn end to check. Any tips on what/where to check?
Have tried re-importing original ImageReady
(Photoshop) files into new Quicktime .mov (original
project was done on OS 9 fyi). But no change in
results.. any help greatly appreciated.
iMac Mac OS X (10.3.9)

I am trying to compress an 18GB quicktime movie for youtube/vimeo sharing but Compressor keeps telling me it's failed. Any ideas?

I am trying to compress an 18GB quicktime movie for youtube/vimeo sharing but Compressor keeps telling me it's failed. Any ideas?

make sure you have sufficient drive space on your target drive. Make sure you have a minimum of 15% free space on your startup drive. What format is the original quicktime movie?

How to lift a segment of a song for iDVD menu

how to lift a segment of a song for iDVD menu
I do not want to lop off the end-- I want to lift a middle segment of a piece of music and loop it on the menu page for iDVD
Help?

Try adjusting the start and end point in iTunes Info window for that particular track:
However, before committing to a disk burn save it as a Disk Image and play it with DVD Player to make sure the edit in iTunes was carried out in the final product. It doesn't in some instances.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

How do I make 16:9 quicktime movies of footage shot & edited in widescreen

I just finished editing a project that was shot in Widescreen. I want to export a 30 second clip from it to put in a DVD SP menu Drop Zone
When I go to File --- Export ---- Current Settings I export it and it makes a quicktime movie. No problem.
When I open up that file using QT on my desktop, it is still in 4:3 mode.
When I put that quicktime into DVD SP menu that is 16:9, it plays in 4:3 mode.
How can I make a Quicktime Movie that is widescreen, plays in Quicktime Widescreen, and when I bring it into DVD SP plays Widescreen in a Drop Zone of a menu that is widescreen.
Thanks in advance

You can either make the dimensions of your export 16:9 or export an anamorphic 4:3 qt and make sure the anamorphic flag is turned on for the qt. Not sure how consistent fcp is in doing this, but you can always open the exported qt in qtplayer and change the display aspect ratio.

FCP Quicktime Movies works well in iDVD, but not in DVDSP

Hello,
I work in a film school with several iMac & PowerMac editing suites running Final Cut Studio 2.
Every computer is set up exactly the same way, yet we are having odd problems with DVDSP on one of the PowerMacs.
From FCP6, we export self contained quicktime movies, that we then Compress, and then import into DVDSP. This system works well on all of our new iMacs, but on the 3 year old PowerMac, the resultant DVDs that it burns do NOT playback on any DVD Players at all.
Yet strangely, when I take the same QT Movie into iDVD on that computer, it burns a perfectly good DVD.
I have even tried bringing the QT Movie files and Compressor files from the Power Mac and transfer them onto an iMac and have been able to burn them fine that way as well. This is occurring with all the FCP projects on this computer.
Any help would be much appreciated,
Sincerely,
Marc Griffin

It could be a few things, but it may be that the drive itself is dirty or going. It sounds strange but there were people on the board who ran into issues where they could burn the DVD but not play it back on the same drive. Could be something became corrupted. Also people have noticed some strange things happening if an install of Studio 2 was done over a prior installation - it seemed to be most reliable by doing a fresh OS install then installing 2. Also does the computer have all the updates to the software? Are all the computers running the same OS? Have you deleted prefs and repaired permissions?
Also check your settings on the PowerMac, are you doing a proper build/burn? Did you set a first play? Are you using the same type of media?

How to put dvd project into quicktime movie?

I am doing some slideshows in iPhoto and in iDVD and want to get them into iTunes. Some I have been able to drag and drop into itunes but some will not work that way. Some show the green + sign but do not copy. I have tried to import to itunes and that does not work. From what I have read it looks like I need to convert to quicktime movie first but I have not been able to find anything that works to find how to do that. Please help.

iDVD encodes your projects for burning to a DVD and that is it; however, iMovie can share to a variety of places (online) and to iTunes. FWIW, your movie is in a quicktime format before you get it into iDVD - it is formatted there as an mpeg-2 (I believe) which is the standard for video on DVDs to be played in DVD players.
So, why don't you use iMovie? It is a lot better than iPhoto; if you wish to use iPhoto, make your slideshow there and then import into iMovie.

FCP Quicktime movie files not working with iDVD

I have been using iDVD for years with no issues. Now, whenever I export a QT file from FCP 7 and use it in iDVD, I get a blank screen with audio and no video.
I am able to work around the problem by using "Export Using Qucktime Conversion" and creating a smaller file, but I've never had to do that before. What in the world am I missing here? Shouldn't I be able to export as a QT movie, as long as the file is not gigantic? (the most recent one I used and had this problem occur was only about 500mb). Thanks for any help...
Ben

Hmmm,
Well this is helpful information but unfortunately didn't solve my problem. The movie in question is only 5 1/2 minutes long. When I export it as a QT movie, iDVD "acts" like everything is fine; I can preview it within iDVD, etc.But when I burn the disc, it comes out blank. I then went back to FCP and exported it using QT conversion, and the DVD burned just fine. (I exclusively use Taiyo Yuden media and have never had a bad disc).
This is just a simple 16:9 movie, shot at 720/30p on a Canon DSLR. I ingested with Log and Transfer using ProRes422, then dropped it onto the timeline, added a music track, rendered, and exported as Quicktime movie. It looks great on my desktop using the QT player, but it simply will not work in iDVD. Still stuck here...
Ben

What to use and how to convert a quicktime movie for a website. . .

I have a handful of Quicktime movies on my computer that I have edited and then coverted to MPeg4, AVI and mov. Now what I need to do is to get the to flash to put on my webpage. How exactly would I go about this?

You would start by purchasing software that can create Flash Video (.flv).
http://www.adobe.com/products/flash/

How do I prepare a FCP Quicktime movie for iDVD?

Similar Messages

Maybe you are looking for