How do I prepare G4 with external HD for internal HD replacement?

My G4, bought in 2005, is becoming unstable. I want to prepare for replacing the internal HD. I have an external Firewire 186 GB Seagate HD that is only partially utilized for storing photographic images. I have the original install disks for OS X 10.4 and for many - but not all - of the applications on the internal HD. MS Office might not have another install privilege and Adobe can be difficult about reusing their product serial numbers. I assume that the authorization codes for purchased downloads are stored somewhere on the internal HD.
Can I move the applications to the external HD while I replace the internal HD, reinstall the OS and the Intego security suite, set up the WLAN codes, and update the OS? I would not need to run the applications from the external HD but I would want to reinstall them from there onto the new internal HD if that is at all possible.

Hi Oliver, and a warm welcome to the forums!
First, how much space is free on the external drive, and how much is used on the Internal drive?
The best way would be to Clone the Internal to the external drive, without erasing anything on the external, which if you have enough space can be done if we take care with additional instructions to follow if needed.
After we know the answers to these questions...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/tribackup.html
For the new Internal drive... How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html

Similar Messages

How to create Function Module with TABLE parameter (for internal table)

Hi Guys,
I am trying to create a function module by using TABLE parameter. I have to pass an internal table to this function module for processing.
But it saying : TABLES parameters are obsolete!
And I am not going further.
Please suggest any work arround.
Thanks

Hi,
create a table type in SE11..
Then use that in your function module importing/exporting/changing parameter for passing internal tables..
Thanks,
Naren

How to map Idoc fields with external file

Hi All,
How to map Idoc fields with external file.
I want to check the settings where Idoc fields are mapped with external file.
Thanks in advance.
Regards,
Govind.

If you have configured a fileport where on trigger of IDOC you are creating the file, you can look at the message type documentation and get the offset values for each field in each segment

How to publish iPhone Apps with Flash CS5 for beginners

After many trial/errors and with lots of support from this site, I've decided to start building some tutorials to help people get into the packager. This is the first one and, now I'll work on a usual erros handle tutorial.
Any comments and/or critics are welcome.
http://www.chrisid.com/blog/2010/10/how-to-publish-iphone-app-with-flash-cs5-for-beginners /
cheers,
Chris.

It helped me a lot, exept I hav this little problem ..
I can't select the .p12 file .. it's disabled..

I bought a Mac Mini w/ Iworks.. Pages has disappeared completely.. how can I re-download with out paying for it again

I bought a Mac Mini w/ Iworks.. Pages has disappeared completely.. how can I re-download with out paying for it again

The iWorks prebundled with Mac Minis is a demo release, and not fully featured. Unless you mean you downloaded iWorks from the Mac App Store at a later time, it really can't be freely re-downloaded as fully featured.
Use this link if you got it from the Mac App Store and can't find get it to redownload normally: http://www.apple.com/support/mac/app-store/
Look at* http://www.macmaps.com/crossplatform.html for alternatives.

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

I would guess you need the A1460 model
see here
http://www.apple.com/ipad/LTE/

How to create Sales orders with external id ?

Hi Experts,
I wanna write a program to create Sales Order with external id via function muodule 'CRM_ORDER_MAINTAIN' and 'CRM_ORDER_SAVE'.But i don't know how to do and do any body tried it.The key issue is that how to use external id which is supplied by ourself rather than internal id supplied by system.
Thanks for all.

Hi,
If you have already set the number range as an external range.
Then just passing the transaction type to field 'process_type' and external id to field 'object_id' of table ct_orderadm_h. Sales order will created with the assigned external id.
Hope this help.
cheers,

How to integration obiee Authentication with external app?

now i need integrate obiee with external app(web application).
one user have 2 roles. one is teacher, others is school admin.
when he login in external app, the first screen show teacher and school amdin. he click teacher login in this system.
after user login in . system set the role into session.
then he want to see obiee dashboard in external app side.
in obiee side, i need do some resources control for this role.
but i how to get this role? i can get the two roles from LDAP server. but i need confirm user login in external app use which role?
i no idea for this .please help me.
Thank you very much.

Hi,
Sounds like your OBIEE apps needs to be able to get the role from the session (I assume database session), which means OBIEE needs to be able to get the same session from the external app. Does the external app set a cookie or something that would identify the session? If so use that cookie in OBIEE to get the session? More than likely need more details of the architecture of you external application!
Regards,
Gareth

How to stop sleep/hibernation with external display & lid down

What is the proper way to get my MBA to not sleep, hibernate, etc. when I have an external display attached and lid closed while watching a movie or webcast. In such a case I am not touching the mouse, trackpad, or keyboard.
I have bluetooth keyboard and usb wireless mouse attached.
I also disabled the sleep/poweroff options in the energy settings while watching.
The MBA still would go to sleep or something after 10 or 15 minutes of no agitation.
Also, the Monitor goes blank since their is not signal coming through to it.
Was this just not a use case that was thought through: Watch video stream with external monitor and lid closed? Make sure the MBA knows this scenario invalidates the powersave options????? And yes, the power was plugged.
Thanks

Caffeine puts a little coffee cup icon at the top bar. Click to turn it off and on - it is on when the cup is dark, ie has coffee in it. However, this won't solve your problem - the MBA will still sleep with the lid closed. There are settings to allow use of an external monitor but what I did was download InsomniaX. This little free app keeps your computer from going to sleep when you close the lid. That way you can close the lid, walk down a hall or do something, then open the lid and keep working. Just don't forget it is on and leave the Mac too long or it will run out of battery.
Insomnia isn't in the App store, had to download it at http://www.macupdate.com/app/mac/22211/insomniax

How to integrate iPayment module with external Payment System

Hi,
I have a requirement where I need to integrate Oracle iPayments in Release 11i with external payment system which is different than standard payment system given by Oracle,so can anybody please guide me on the steps which need to be performed to integrate Oracle iPayment with external payment system for credit card transaction processing.
I want to implement both the models gateway payment model and payment processor model.
It will be really helpful if anybody can provide me some sample code for the servlet to be written and the configuration steps asap.
Thanks in advance.
Thanks,
Devendra
Edited by: Devendra Pratap Singh on Mar 23, 2009 12:02 PM
Edited by: Devendra Pratap Singh on Mar 24, 2009 4:03 PM
Edited by: Devendra Pratap Singh on Mar 24, 2009 9:05 PM

Devendra,
Review the following notes:
Note: 333676.1 - Oracle iPayment White Paper
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=333676.1
Note: 135745.1 - iPayment API and Interface FAQ
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=135745.1
Regards,
Hussein

How to use iPod Shuffle with external Speakers

I tried using iPod Shuffle but its not working with external speakers.
Please let me know if there is any way i can use it in External Speakers

http://manuals.info.apple.com/MANUALS/1000/MA1550/en_US/iPod_shuffle_4thgen_User _Guide.pdf

How to make AEC work with external webcam?

Hi everyone.
What I'm trying to do is to make AEC work with external webcams. My target: flash in browser and desktop AIR app.
I have the following situations:
1. Laptop Lenovo S400, really not the best laptop, with MIC placed right above the speakers. But... AEC works excellent!
2. PC with Logitech 1080p webcam (which has stereo microphones) and external speakers. But... AEC doesn't work at all. It even doesn't try to reduce any speakers sound in microphone data.
3. The same laptop with connected Logitech camera and again - AEC doesn't work.
In each situation I use absolutaly the same environment(Win7, target player - 11.9, Flex 4.6.0 SDK), code, compiller, etc..
And I was unable to find any info for such situation.
Does anybody have experience with such problem? I will be really grateful for any help.
Here are parts of code:
// somwhere early...
_microphone = Microphone.getEnhancedMicrophone();
// called before we attach microphone to NetStream
private function _setMicrophoneMode():void
            _microphone.setLoopBack(false);
            _microphone.framesPerPacket = 1;
            _microphone.setSilenceLevel(0, 2000);
            _microphone.codec = SoundCodec.SPEEX;
            _microphone.encodeQuality = 10;
            _microphone.gain = 50;
            _microphone.rate = 44;
            if (_useEchoSuppression)
            var options:MicrophoneEnhancedOptions = _microphone.enhancedOptions;
            options.mode = MicrophoneEnhancedMode.HALF_DUPLEX;// using this for external webcams
            options.echoPath = 128;
            options.nonLinearProcessing = true;
            _microphone.enhancedOptions = options;
            } else
                _microphone.setUseEchoSuppression(true);
                trace(_microphone);

I think that with the current state of the Adobe AIR Adobe FLash platforms, there is too much work to do to get echo cancellation to work on all platforms, and to get video to work as expected too. I think Adobe could solve many of these issues by implementing native WebRTC into the AIR platform, see this post here:
http://forums.adobe.com/message/6232094#6232094

How to convert the table with separate fields for every period

Hi there,
I have the table in R/3 called COSP. The table contains the separate fields for values of separate reporting periods, let's say Amount01, Amount02 etc. I need to extract this data to BW and load it into ODS, which contains the data like common key figure for amount and info object Fiscal Period. How to extract and tansform the data to be able to load it there?
I mean, how to change the row like:
100 100 200 200....
for rows like:
001 100
002 100
003 200
004 200
I hope you'll help,
Kooyot

Hi,
you need to implement a bit of coding for that.
With the 'do varying' statement abap provides a loop over those fields. Within this loop you can build up a new internal table with one entry for each period and amount.
kind regards
Siggi
PS: I am not very familiar with CO, but I guess there will be a standard extractor for that.

How to Integrate Oracle 10g with TIBCO Enterprise for JMS

Will it be possible to provide a document that will instruct on how to integrate oracle10g with TIBCO Enterprise for JMS
I needed to Integrate oracle 10g with TIBCO Enterprise for JMS.
When i searched on internet about how to do it, i found a document on oracle's site which has instructions (in the HOW-TO section) related to integration with OC4J (and not Oracle 10g)
I have been successfully able to integrate OC4J developer preview edition 10.1.3 with TIBCO enterprise for JMS.
when i tried with the same instructions to integrate oracle 10g with TIBCO Enterprise for JMS, i could not succeed. The i understood that the standalone OC4J is different from the embedded OC4J in Oracle 10g
Will it be possible to provide a document that will instruct on how to integrate oracle10g with TIBCO Enterprise for JMS
Your help will be really appreciated
Thanks,

There are how-to documents here: http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/index.html#JMS
with separate instructions for:
IBM WebSphere MQ JMS
Tibco Enterprise for JMS
SonicMQ JMS

How to use the iTrip with dock connector for iPod 5th gen. video

I bought the new iTrip with dock connector for my iPod video 5th gen. and I followed exactly the instructions but I cannot hear any music on the radio. Has anyone experienced the same problem or the contrary has anyone managed to make it work. Thanks for your help.
Inaha
iMac 4 Mac OS X (10.3.9) iPod 5th gen video

I got the answer from someone else and it works.

How do I prepare G4 with external HD for internal HD replacement?

Similar Messages

Maybe you are looking for