How do I prepare my iMac for sale? And best practice for transferring media to a new system.

This is my first time posting in a forum, so I will apologize in advance if I'm doing something wrong. I've tried to search for a very clear answer to my questions in the existing discussions, but have not had much luck.
I ordered a Macbook Pro today and would like to sell my current iMac to supplement some of the cost. I purchased my iMac in March of 2011 with OS X Snow Leopard preinstalled. I've since updated to Mountain Lion. When my computer came in it did not have OS DVDs, so I am not sure exactly how to take it back to factory default and remove ALL of my information safely in order to prepare it for sale. I'm afraid to tell it to format if I am going to need a boot disc/drive to reinstall the OS. I've been trying to research all day and have learned that I will not be able to sell it with the current OS, only the one that came with the computer at the time of purchase (to the best of my understanding).
Secondary to all of this, I have a question about backing up info and porting it to my new system. I have run the Time Machine backup to my external hard drive. However, I DO NOT want to port it to my new MBP as an image of my past machine. I did that when I got my iMac from my old MBP and my iMac thinks it is a MBP (MBP EFI/SMC Firmware Update Icons in my system utilities folder as well as identified as a Macbook Pro on my network). I've never been able to get all of these things to go away and I feel like it's chewing up hard drive space for no purpose whatsoever. I also worry that it could create system issues that I'm just not savy enough to catch before they are beyond control. That being said, I'd like to begin fresh with my new MBP. What is the best method of bringing my photos from iPhoto and music/movies/books/etc from iTunes to my new system? My word documents are easy enough...I keep 3 flash drives updated with them at all times.
Thanks in advance!

Whoever said you can't sell you iMac with the current Mac OS X is wrong, I believe.
Unfortunately, it is not wrong.
Any OS purchased/obtained at the app store - as is the case here - is not transferable. The license is tied forever to the Apple ID used to obtain it. The SLA states that the seller needs to erase the drive and reinstall the original system.
@ Kamikazwe:
You can call Apple and give them your serial number and they will send you copies of your original disks at a nominal charge.
You do need to use your original Snow Leopard disk, boot from it, erase the drive, and reinstall Snow Leopard. The buyer of the machine will need to purchase his/her own copy of Lion or Mountain Lion with their own Apple ID or they will never be able to reinstall or update the OS.
SLA Excerpt:
3. Transfer.
A. If you obtained the Apple Software preinstalled on Apple-branded hardware, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that:  the Apple Software is transferred
together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or
other storage device; and (iv) the party receiving the Apple Software accepts the terms andcconditions of this License. For purposes of this License, if Apple provides an update (e.g., version 10.8 to 10.8.1) to the Apple Software, the update is considered part of the Apple
Software and may not be transferred separately from the pre-update version of the Apple Software.
B. If you obtained your license to the Apple Software from the Mac App Store, it is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so, and you may restore your system to the version of the Apple operating system software that originally came with your Apple hardware (the “Original Apple OS”) and permanently transfer the Original Apple OS together with your Apple hardware, provided that:  the transfer must include all of the Original
Apple OS, including all its component parts, printed materials and its license; (ii) you do not retain any copies of the Original Apple OS, full or partial, including copies stored on a computer or other storage device; and (iii) the party receiving the Original Apple OS reads and agrees to
accept the terms and conditions of the Original Apple OS license.

Similar Messages

  • Can anyone recommend tips and best practices for FrameMaker-to-RoboHelp migration ?

    Hi. I'm planning a migration from FM (unstructured) to RH. I'd appreciate any tips and best practices for the migration process. (Note that at the moment I plan to import the FM documents into, not link to them from, RH.)
    For example, my current FM files are presently not optimally "chunked", so that autoconverting FM file sections (based on, say, Header 1 paragraph layout) won't always result in an optimal topic set. I'm thinking of going through the FM docs and inserting dummy paragraphs with a tag somethike like "topic_break", placed in more appropriate locations that the existing headers. Then, during import to RH, I'd use the topic_break paragraph to demark the topics. Is this a good technique? Beyond paragraph-based import delineation, do you know of any guidelines for redrafting FM chapter file content into RH topics?
    Also, are there any considerations/gotchas in the areas of text review workflow, multiple authoring, etc. after the migration? (I've not managed an ongoing RH doc project before, so any advice would be greatly appreciated.
    Thanks in advance!
    -Kurt
    BTW, the main reason for the migration: Info is presently scattered in various (and way to many) PDF files. There's no global index. I'd like to make a RoboHelp HTML interface (probably WebHelp layout) so it can be a one-stop documentation shop for users.

    Jeff
    Fm may produce better output for your requirements but for many what Rh produces works just fine. My recent finding re Word converting images to JPG before import will mean a better experience for many.
    Once Rh is set up, and it's not difficult, for many its printed documents will do the job. I would say try it and then judge.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Tips and best practices for translating C into LabVIEW? SERIOUS newbie...

    I need to translate a C function into LabVIEW.  This will be my *first* LabVIEW project.  I've been reading some tutorials, and I'm still struggling to get my brain out of "C/C++ mode" and learn the LabVIEW paradigms.
    Structurally, the function that I need to translate gets called from a while-loop and performs a bunch of mathematical calculations. 
    The basic layout is something like this (this obviously isn't the actual code, it just illustrates the general flow control and techniques that it uses).
    struct Params
    // About 20 int and float parameters
    int CalculateMetrics(Params *pParams,
    float input1, float input2 [etc])
    int errorCode = 0;
    float metric1;
    float metric2;
    float metric3;
    // Do some math like:
    metric1 = input1 * (pParams->someParam - 5);
    metric2 = metric1 + (input2 / pParams->someOtherParam);
    // Tons more simple math
    // A couple for-loops
    if (metric1 < metric2)
    // manipulate metric1 somehow
    else
    // set some kind of error code
    errorCode = ...;
    if (!errorCode)
    metric3 = metric1 + pow(metric2, 3);
    // More math...
    // etc...
      // update some external global metrics variables  
    return errorCode;
    I'm still too green to understand whether or not a function like this can translate cleanly from C to LabVIEW, or whether the LabVIEW version will have significant structural differences. 
    Are there any general tips or "best practices" for this kind of task?
    Here are some more specific questions:
    Most of the LabVIEW examples that I've seen (at least at the beginner level) seem to heavily rely on using the front panel controls  to provide inputs to functions.  How do I build a VI where the input arguments(input1, input2, etc) come as numbers, and aren't tied to dials or buttons on the front panel?
    The structure of the C function seems to rely heavily on the use of stack variables like metric1 and metric2 in order to perform calculations.  It seems like creating temporary "stack" variables in LabVIEW is possible, but frowned upon.  Is it possible to keep this general structure in the LabVIEW VI without making the code a mess?
    Thanks guys!

    There's already a couple of good answers, but to add to #1:
    You're clearly looking for a typical C-function. Any VI that doesn't require front panel opening (user interaction) can be such a function.
    If the front panel is never opened the controls are merely used to send data to the VI, much like (identical to) the declaration of a C-function. The indicators can/will be return values.
    Which controls and indicators are used to sending data in and out of a VI is almost too easy; Click the icon of the front panel (top right) and show connector, click which control/indicator goes where. Done. That's your functions declaration.
    Basically one function is one VI, although you might want to split it even further, dont create 3k*3k pixel diagrams.
    Depending on the amount of calculations done in your If-Thens they might be sub vi's of their own.
    /Y
    LabVIEW 8.2 - 2014
    "Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
    G# - Free award winning reference based OOP for LV

  • UI Defaults Import problems and best practice for using UI defaults

    Hi,
    I'm hoping some of you experts can tell me how to Import the UI Defaults from Schema A and Workspace A to Schema B and Workspace B. My goal is to fluidly share the UI defaults with another developer as we march forward creating new versions of the application (inside new Workspaces with new schema names). My longer term goal was to create a "library" of UI defaults that other future developers could easily access as well.
    The basic setup I have been using is that each developer gets their own schema and their own workspace. When a new version of the database design is made, I keep the older versions of the workspaces and schemas intact and then create a new workspace and new schema for each developer (just two of us right now). Then we Export apps, respectively, from our old workspaces and Import apps into our new workspaces. I also create a new db tablespace and new db user account and map to new workspace as well. This way I always know what db design version we are using against what Apex app version and can, conversely, delete tablespaces, user accounts, workspaces and Apex schemas in one swallow without worrying about getting the wrong version of something accidentally deleted. 9It may seem like I am doing a lot of extra work, but my sanity is still (relatively) intact.)
    I keep getting
    "ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-20001: You do not have access to the schema that you are importing. Import failed. &lt;pre&gt;begin wwv_flow_api.g_id_offset := 0; wwv_flow_hint.g_schema := 'MY_OTHER_SCHEMA'; wwv_flow_hint.check_schema_privs; end;&lt;/pre&gt;"
    when I try importing it.
    We want to share our UI defaults that we each set up in our respective workspaces and schemas. We do have some overlap of tables (which may be a no no I suppose). We also each have differently named (test) apps.
    So, like app Import/Export, I thought I could just Export my app (along with UI) from Schema A and Workspace A and simply import it into Schema B and Workspace B and then in the new Workspace have access to the UI. I tried editing the UI *.SQL using the app ID and new schema name but it still balks. It seems like there is an internal table ID code specific to each table that is particular to the table and the workspace it was created in.
    I can go to a specific workspace, create a sample UI, Export it's app, and Import the same app (new ID) into same workspace and the UI shows up fine.
    So, what good is the UI defaults if you can't carry them forward to the next version of your app that is in a new workspace? It seems like we are forced into creating the equivalent of one workspace, say the "Library", and both of us with separate schemas sign into here. But then how do I get the UIs from the "Library" to our "Beta" workspace, and similarly from there to 'Production' without recreating UIs each time? And, if I prefer a sample set of records, say only 100 test recs, and the other developer prefers a full set, say 30,000 recs, and we have to use the same workspace, since the workspace can only be associated with one db tablespace, how can I load both 100 and 30,000 recs into same area? (and since we can't, that is another reason we wanted to use separate workspaces and pass our respective UIs back and forth and finally into the shared "Library" area.)
    Well, thank for reading through this and hopefully it makes sense.

    OK Scott, let me try to clarify here:
    Regardless of what reasons I have, my immediate goal is to sucessfully Export the UI Defaults from Schema A and Workspace A and Import into Schema B and Workspace B.
    So, logging in as Schema A into Workspace A, I go to my app, then Export/Import then "Export User Interface Defaults". There is only one schema available to choose from in the "Schema" dropdown select list. I export the UI and save it to a file.
    Next I logout and then login as Schema B into Workspace B. I go to Shared Components UI Defaults and display my tables. Most of these tables (about 30 of them) have the same exact name as the tables used by the other schema. UI Defaults do not exist.
    I choose "Import" in the Tasks list, File Type "User Interface Defaults" and pick file I just exported. File is successfully Imported. Now I'm on screen for installing the UI Defaults. When I try to Import the UI it brings me to "Confirm Replace UI Defaults" and lists the OLD workspace schema (not the new one I expected)as being removed and replaced. I push ahead, tell it to do the replace and get the "You do not have access to the schema that you are importing". So I guess I'm doing something wrong.

  • Resources for from design - best practices for layout?

    Hi,
    I have made a number of forms fo the past few years.  I feel like they look dated and are somewhat stale...   I have found a few resources out there on Javascript best practices and more mechanical focused articles, but nothing really specific design as it relates to usability and "feel".  I realized some of this is subjective and varies depending on the form's purpose, but I am just looking for some new ideas.
    Does anyone have a resource or listing of froms they think are outstanidng from a design perspective?
    Is anyone willing to share forms they think are outstanding? Just that baisics like information collection?
    How much color and line type objects become to much?
    What are some design elements used in "web 2.0" (whatver that really means) that we sould be using in our forms.  tempered with what can be done.
    I am looking for this to be an open disucssion and am curious to hear what works for others.  I hope others will find this interesting and helpful.
    Cheers,
    Tom

    And the second snippet code validates any form to check every fields if values are not null, if a value is null it will setFocus on the first null field
    2. Validate Form and Focus on First Field that Fails Validation
         2.1 Create a script Object with two small methods to return a table of fields that have null values
    Script Object :
    form1.#variables[0].myForm - (JavaScript, client)
    //Tab for field's expressions and field's exceptions
    var tabExpression;
    var tabException;
    function validateAllFields(rootObject){
              //If a field is null, stop everything
              if (tabExpression.length > 0)
                             return;
              //If the 'presence' property is by default 'visible' in the form and the object value is 'visible', the 'presence' property doesn't exist
              //If its default value is "hidden", the property always exist
                   if (!rootObject.isPropertySpecified("presence") || rootObject.presence == "visible"){
                                  //Verify if the object contains an interface 'button'
                                  //The button is considered as a 'field', so if it's not a button the statement is true
                                  if (!(rootObject.isPropertySpecified("ui") && rootObject.ui.nodes.item(0).className == "button")){
                                                 //If the object contains nodes and if it's not a 'field' or a RadioButtonList
                                                 if (rootObject.nodes.length > 0 && (rootObject.className != "field" && rootObject.className != "exclGroup")){
                                                                //Recall this method for each nodes in the object to find every fields (Recursive Method)
                                                          for (var i = 0; i < rootObject.nodes.length; i++){
                                                                                    validateAllFields(rootObject.nodes.item(i));
                                                 //Verify to add the object in the list if the object is a field and if it contains a value
                                                 if (rootObject.className == "field" || rootObject.className == "exclGroup"){
                                                                if (rootObject.rawValue == null || rootObject.rawValue == 0){
                                                                               //Variable to determines if the object is an exception field
                                                                               var boValidate = true;
                                                                               //If there's exception fields
                                                                               if (tabException.length > 0){
                                                                                              //Verify if the field is in the exception list
                                                                                              if (tabException.indexOf(rootObject.name) != -1){
                                                                                                       boValidate = false;
                                                      //Add if the object is not in the exception table
                                                      if (boValidate)
                                                                tabExpression[tabExpression.length] = rootObject.somExpression;
         2.2 Create this method in your object as well, and will be called on a click_event
    function getValExpressions(rootObject, tabExcption){
         //Create new table
         tabExpression = new Array();
         //Put the exceptions fields value in the exception table
         tabException = tabExcption
         //Validation
         validateAllFields(rootObject);
         //Return a null field
         return tabExpression;
         2.3 The click event is where you write the special validation for different forms
    //Create a table with exception fields, can be used for special validation fields or no validation
    var tabExceptionFields = new Array("dateField1", "txtComments", "txtTotal");
    //Call the validation
    var tab = myForm.getValExpressions(Main, tabExceptionFields);
    if (tab.length > ){
         xfa.host.setFocus(tab[0]);
    } else{
         var boValidate = false;
         var strExpression;
         //write your validation according to the fields you need special validation.
         if (statement == false){
              strExpression = Reference_Syntax.Field.somExpression;
              boValidate = false;
          if (boValidate){
              xfa.host.print(1, "0", (xfa.host.numPages -1).toString(), 0, 0, 0, 0, 0);
         } else{
              xfa.host.setFocus(strExpression);
    I will post a form template as an exemple for these function
    Enjoy!
    Message was edited by: Magus069

  • BASELINE PACKAGE - V1-V2.603 and Best Practices for Pharmaceuticals

    Hi All,
             > Recently we have upgraded to EHP4 stack 4
             > I am trying to install BASELINE PACKAGE - V1-V2.603 I chose that because its localized for India.
             > When i am trying to install  BP-ERP05 603V7 and BP-INSTASS 600V7 its asking for BBPCRM 600, BBPCRM
                700 and SAP_APPL 600, SAP_APPL 603.
             > Why does the installer ask for lower versions? ofcourse i have read that if the version is Higher than the one mentioned
                in the "Quick Guide to Installing the SAP Best Practices Baseline Package (IN)" will not work.
             > But do we have any BaseLine Packages Specific to EHP4?
             > If not, then could any one tell me where and how to download and install the BBPCRM as an add-on.
             > I only need that Software component because I strongly feel that all the interdependencies are linked with this one only.
    Any help and suggestions are welcome.
    Regards,
    Antony Chaitanya.

    Hi Sunny,
                    Thanks very much for your response.
    The major problem that i am having is I some how did not include the BBPCRM software component or the related software components for CRM at the time of upgrade is my best guess.
    So, the latest add ons BP-CRM60 600V3 and BP-CRM70 700V1 or the add ons BP-ERP05 600VD/ 603V7 along with that BP-INSTASS 600V7 are not able to install because the prerequisite are not meeting. Only BP-INSTASS 600V1 got installed.
    Can any one tell me how and what to do now.... plzzz???
    Things like how to get the CRM related s/w components installed or if there is a work around to get the Baseline Packages (IN) activated with out the CRM.
    Regards,
    Antony Chaitanya.

  • Asset Hierarchy for Linear Assets - Best Practices for UK Utilities

    Hi Experts
    I would like to know if there is any best practices to be followed while developing Asset Hierarchy for Linear assets in UK Utlity Industry. Could anyone please suggest ? if you have any sample hierarchy, that would help a lot.    
    Thank you
    Vijay

    Hi ,
    I dont think Utilities for Uk is available. you can refer the china version. [ scenarios|http://help.sap.com/bp_utilities603/UTL_CN/html/scope/Scoping_offline_SC.htm?display=STE-UTL_CN_1603+BP_UTL_V1603_FULL_SCOPE.xml]
    DP

  • Business Flows for Sales and Contracts process

    Hi,
    I needs Business Flows for sales and contracts process for my project.
    Does anybody knows where i can find these BFA ?
    Thanks
    Regards
    Mehdi

    Hi mehdi;
    Please check below and see its helpful:
    R12 Responsibilities And Roles Based On Business Flows [ID 406401.1]
    Regard
    Helios

  • What is the guideline and/or best practice for EMC setup on ASM?

    We are going to use EMC CX4-480 for ASM storage on RAC. What is the guideline and best practice for EMC setup on ASM?
    Thanks for the advice!

    Probably a poor choice of words. Sorry.
    So basically, I have gotten further, but I just noticed related problem.
    I'm using the WebServices(WS) 1.0. I insert an account, then, on a separate WS call, I insert my contacts for the account. I include the AccountID, and a user defined key from the Account when creating the Contact.
    When I look at my Contact on the CRMOD web page, it shows the appropriate links back to the Account. But when I look at my Account on the CRMOD web page, it shows no Contacts.
    So when I say workflow or Best Practice, I was hoping for guidance on how to properly write my code to accomplish all of the necessary steps. As in this is how you insert an account with a contact(s) and it updates the appropriate IDs so that it shows up properly on the CRMOD web pages.
    Based on the above, it looks like I need to, as the next step, take the ContactID and update the Account with it so that their is a bi-directional link.
    I'm thinking there is a better way in doing this.
    Here is my psuedocode:
    AccountInsert()
    AccountID = NewAcctRec
    ContactInsert(NewAcctRec)
    ContactID = NewContRec
    AccountUpdate(NewContRec)
    Thanks,

  • BEST PRACTICE FOR AN EFFICIENT SEARCH FACILITY

    Good Morning,
    Whilst in Training, our Trainer said that the most efficiency from the Sharpoint Search would be to install the Search Facility on a separate server (hardware).
    Not sure how to have this process done.
    Your advice and recommendation would be greatly appreciated.
    thanks a mil.
    NRH

    Hi,
    You can
    create a dedicated search server that hosts all search components, query and index role, and crawl all on one physical server.
    Here are some article for your reference:
    Best practices for search in SharePoint Server 2010:
    http://technet.microsoft.com/en-us//library/cc850696(v=office.14).aspx
    Estimate performance and capacity requirements for SharePoint Server 2010 Search:
    http://technet.microsoft.com/en-us/library/gg750251(v=office.14).aspx
    Below is a similar post for your reference:
    http://social.technet.microsoft.com/Forums/en-US/be5fcccd-d4a3-449e-a945-542d6d917517/setting-up-dedicated-search-and-crawl-servers?forum=sharepointgeneralprevious
    Best regards
    Wendy Li
    TechNet Community Support

  • Best Practices for AD and Windows Environment

    Hello Everyone,
    I need to create a document having the best practices for AD containing best practices for DNS, DHCP, AD Structure, Group Policy, Trust Etc.
    I just need the best practices irrespective of what is implemented in our company.
    I just need to create a document for analysis as of now. I searched over the internet but could not find much. I would request you all to pour in your suggestions from where i can find those.
    If anyone could send me or point me the link. I am pretty new to the technology, so need your help.
    Thanks in Advance

    I have an article where I shared the best practices to use to avoid known AD/DNS issues: http://www.ahmedmalek.com/web/fr/articles.asp?artid=23
    However, you need first to identify your requirements and based on these requirements, you can identify what should be implemented on your environment and how to manage it. The basics here is that you need to have at least two DC/DNS/GC servers per AD domain
    for the High Availability. You need also to take a system state backup of at least one DC/DNS/GC server in your domain. As for DHCP, you can use 50/50 or 80/20 DHCP rule depending on your setup.
    You can also refer to that: https://technet.microsoft.com/en-us/library/cc754678%28v=ws.10%29.aspx
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Best practice for application help for a custom screen?

    Hi,
    The system is Netweaver 7.0 SP 15 with e-recruiting .
    We have some custom SAP GUI transactions and have written Word documents with screen prints and explanations. I would like to make the procedure document accessible from the custom transaction or at least provide custom help text that includes a link to the full documents.
    Can anyone help me out with options and best practices for providing customized application help for custom SAP GUI transactions?
    Thanks,
    Margaret

    Hello Margaret,
    sorry I though you might be still in a design or proof of concept phase where the decision for the technology is still adjustable.
    If the implementation is already done things change of course. The standard in-system documentation is surely not fitting your needs as including screenshots won't work well.
    I would solve the task the following way:
    I'd make a web or pdf document out of the word document and put it on a web ressource - as you run e-recruiting you have probably the possibility for that.
    I would then just put a button into the transaction an open a web container to show the document.
    I am not sure if this solution really qualifies as "best practise" but SAP does the same if you call the Help for application in the help menue. This is implemented in function module SAPGUIHC_OPEN_HELP_CENTER. I'd just copy it, throw out what I do not need and hard code the url to call.
    Perhaps someone could offer a better solution but I think this works a t least without exxagerated costs.
    Kind Regards
    Roman

  • Universe Design Best Practices for Oracle

    Hello All,
    We recently moved from XIR2 on MS SQL 2005 to XI 3.1 on Oracle. This has been a difficult move for us as my team is new to oracle. I'm currently working on several performance issues between BOBJ and Oracle and am looking for documentation on best practices for universe design with oracle. I've foudn tidbits here and there regrading using parameters joing_by_sql and boundary_weight_table, wondering if there are other options out there that might help. We have queries taking 45+ minutes to run and that is totally unacceptable.
    thanks
    Andrea

    I am not sure if you are looking for Optimization or anything else. sorry for that following link might help you considering Oracle as DB.
    Link:[Universe Optimization 1|http://www.bidwtoday.com/business-objects/universe-designer/business-objects-universe-optimization/]
    Link:[Universe Optimization 2|http://forums.sdn.sap.com/post!reply.jspa?messageID=8721932]
    --Kuldeep

  • I lost my Serial number for InDesign and need it to load InDesign not my new iMac. How can I request my number from Adobe?

    I lost my Serial number for InDesign and need it to load InDesign not my new iMac. How can I request my number from Adobe?

    Could it be registered under a different identity? I've used three identities over the years to register stuff, so I have to do some looking around to find stuff. Try old email addresses as possible IDs.

  • Tax Conditions for Sales and Distribution using Jurisdiction Code in Canada

    Hello everyone,
    I would like to share with you a doubt relating taxes for Sales and Distribution in Canada.
    The Tax conditions for Sales and Distribution in Canada are the CTX1 (GST - Canada), CTX2 (PST - Canada) and CTX3 (Base + GST). These are the Tax Conditions which appear when creating a Material or a Client for the Canada Region, and are also the ones included in the Canada Standandard Pricing Procedure.
    I tried to apply the standard method of creating a Master Record for these conditions, but an error relating the Jurisdiction Code came out while releasing to accounting.
    Does anyone one how to procceed? Which are the important issues with Finance Accounting to take in to account?
    I would really appreciate any comment relating this issue.
    Thank you very much in advanced.
    Víctor

    Dear Mr. Lakshmipathi,
    In first place, thank you very much for your quick response.
    I have tried many different procedures to get the aim, and among others, a new access sequence was created to allow the introduction of the Jurisdiction Code (UTXJ is not available for Sales Conditions) but once the Condition is created, it is not recognized when creating the Order ("pricing error: Mandatory condition CTX is missing"). Maybe it has something to do with the fact that these conditions are not included in the Finance Accounting Tax Procedure, where the conditions, which represent the same taxes but with different condition names, are defined for a certain Tax Code and Jurisdiction code.
    Among the different SAP notes for the error relating the Jurisdiction code, there was one proposing to change the Condition Category from "D" (Taxes) to a value between "1 and 4". By doing this a new error appears while creating the order, saying that there are conditions in the Tax procedure (JRC1, JRC2)which are not included in the Sales Pricing procedure. By including this conditions in the Pricing procedure, the Tax Conditions existing in the Finance Accounting Tax Procedure are brought to the Order Conditions, in addition to the Sales Tax Conditions. And there is something more, each Tax Condition from the Finance Accounting Procedure appears twice, one with the application V (Sales) with value zero, and one with application TX (Taxes) with the value existing in the Finance Accounting Taxes Procedure. This is how at the end, the corresponding %value of the taxes is brought to the Invoice with the correct Tax Code, and the proper Jurisdiction Code, which is different for each condition.
    Thank you very much for your time.
    Víctor Liedo

Maybe you are looking for