How do I prepare the environment for ARD?

I'm planning to construct the ARD environment for a small company.
I want to know the environment what is needed for it, especially "hardware" when it will be made by minimum construction.
The company have 30macPC on several network segments(I estimate it about 10 network segments).
I hope someone will give me some helpful advices!

There's no special "environment" needed, though if you plan to be observing multiple workstation screens at once, it's strongly recommended to have at least a 100BaseT Ethernet connection with a gigabit connection preferred. Otherwise any network suitable for other uses will probably be fine for ARD. For technical specifications, features and system requirements, see:
http://www.apple.com/remotedesktop/specs.html
You may also want to read the Administrator's Guide:
http://manuals.info.apple.com/en_US/ARD_3.1_AdminGuide.pdf
Note that there is no client for Windows systems. You can take control of a Windows system from ARD if you install VNC on the Windows workstation, but there will be no other functionality.
Regards.

Similar Messages

  • In the Pages Program template on the 4 column page a text is wrapped around a violinist photo How do I prepare the photo for a similar result

    In the Pages Program template on the 4 column page a text is wrapped around a violinist.
    How do I have to prepare the photo to have a similar result.
    Thanks

    You need to have an image with a more or less even background or at least contrasting to the main part.
    Menu > Format > Instant Alpha > run the cursor over the parts you want to eliminate
    With the image selected > Inspector > Wrap > check Image causes wrap > click on 2nd icon > Text Fit > 2nd icon
    Play with Extra Space and Alpha to get what you want.
    Peter

  • How to properly set the environment for user oracle under Linux

    Hi,
    Every time I install XE on Linux somewhere, I repeat these steps (along with [fixing the /etc/init.d/oracle-xe startup script|http://forums.oracle.com/forums/thread.jspa?threadID=843780&tstart=0]), so I thought, why not contribute this to the community.
    Those who have installed XE on Linux know that, after installation, logging in as user oracle gets you in a
    $cryptic prompt. On top of that, none of the essential environment variables are set. Not amusing. That's because the oracle user lacks the proper configuration files for the bash prompt. Log in as user oracle and create these:
    .bashrc
    if [ -f /etc/bashrc ]; then
      . /etc/bashrc
    fi.bash_profile
    if [ -f ~/.bashrc ]; then
      . ~/.bashrc
    fi
    . /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
    unset USERNAME.bash_logout
    clearNow log out and then log in again - a nicer prompt, and all environment variables are set, ready to run sqlplus, imp, etc.
    This should help make your overall XE experience on Linux easier. Regards,
    Georger

    Nice. I checked the .bash_profile of my oracle installation and this is what I can contribute (I got the additional stuff from some tests with other Oracle Versions):
    # /etc/skel/.bash_profile
    # This file is sourced by bash for login shells.  The following line
    # runs your .bashrc and is recommended by the bash info pages.
    [[ -f ~/.bashrc ]] && . ~/.bashrc
    # Oracle Profile Settings
    if [ $USER = "oracle" ]; then
       source /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/oracle_env.sh
       if [ $SHELL = "/bin/ksh" ]; then
          ulimit -p 16384
          ulimit -n 65536
       else
          ulimit -u 16384 -n 65536
       fi
    fiC.

  • How can I see the environment for FormsServlet ?

    Is there an option I can add to a URL to have the FormsServlet dump it's environment (classpath, FORMS60_PATH, etc...). I'm running forms server under WIN2K.

    Just click inside the url address bar. Full url address highlighted, will appear.
    Best.

  • How can we prepare the PDC Cheques from SAP?

    Hi,
    How can we prepare the PDC Cheques from SAP?
    tx
    Bharat

    Dear:
                For catering PDCs in SAP there is a standard procedure. First you book PDC down payment request through F-37 which is mostly done with reference to invoice( A request is a notional entry having no financial impact). After realizing the check at due date you post it through F-29 and clear the customer afterwords through F-32. For configuration you must define Special GL indicator in FBKP for customers and mark it as noted item.
    Regards

  • I own an eMac. I really enjoy burning my iTunes playlists to a cd. But, now an error message pops up just after iTunes prepares the disc for burning.The message states this: The attempt to burn a disc failed. An unknown error occurred (-3). Any advice?

    Hey everyone! So, here is my problem. I own an eMac. I enjoy burning my iTunes playlists to a CD. Well, all of a sudden, right after iTunes prepares the disc for burning an error message pops up and says this: The attempt to burn a disc failed. An unknown error occurred (-3). Any suggestions on how to correct this problen so I can continue burning my playlists???
    Thanks,
                   broshane

    Hi, I'e never heard of that error before!???
    Is this purchased music, or your own music files?

  • How do you set the duration for multiple stills in iMovie 2013?

    How do you set the duration for multiple stills in iMovie 2013?
    Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
    Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
    REALLY??!!

    ...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
    Because often people are animating to words or beats in the music.  Music is rarely performed with a computer-precise beat and tempo.  Musicians aren't robots: they swing the beat sometimes.  They use rubato.  They change tempo.  They change time signatures.  As a result, you have to FIND those words and beats.  It's not a situation where you can say, "There!  I've found the duration of one beat!  Now it's easy to find the rest of them!" 
    If you try it, you will be very disappointed.
    Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out.  You'll see that it's trial-and-error: what's the point where it becomes inaudible?  It depends on how high your speakers are turned up.  You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume.  You might say, "Hey!  The music ends before the layer ends!"...  but you KNOW you set the layer's out point when the audio file goes silent.
    AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
    I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures.  Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works.  For true accuracy, you need  find the timings yourself. 
    If you want something simpler, try a different application. But be prepared for lower level of accuracy.

  • Preparing the harddrive for installation?

    I cannot seem to find out how I have to prepare the harddrive for the installation of Solaris 8...
    Does it have to be totally blank? (No partitions)
    Do I have to create partition(s) before installing?
    If so do they need to be FAT16 or FAT32?
    And do I have to format them or leave them unformatted?
    Any hints?

    If you are on a SUN hardware, U need not have to format the disk before installation. Just check out weather the machine has detected the hard drive by probe-scsi OR probe-ide at the "ok" prompt. The installation procedure by itself involves partitioning the disk as per the requirement:)

  • How do I use the VIs for the Fluke Hydra Series 2620a multimeter?

    This message refers to the VIs found at this link:
    http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861
    How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design Project at Temple University. It is a Control System where I need to read voltages from sensors and output voltages to different system components. I am trying to set up a VI using the VIs found above to make sure that I can successfully read and send voltages. There was no documentation given with the 2620a VIs.

    Unfortunately, you've got a very old driver for an old instrument. The only available help is to turn on Context Help and move your mouse over the VI icon. It doesn't appear to have any help for individual controls and indicators. The only good news is that it appears to be a simple instrument with only a few functions. There's some main ones line initialize (to set serial port), configure channel, configure instr, and read values. One main thing is whether you're using gpib or serial, Each front panel has a setting. If it's gpib, set the port to the gpib address. If it's serial, set the port to one number less than the com port you're connected to. For example, if you're using Com1, set the port to 0. For the other controls, I'm afraid that you're going to have to try and compare what's there with the controls and settings of the actual instrument. Having access to the instrument manual will be essential. I would engourage you to experiment a little. There's probably very little chance of damaging the instrument especially if nothing is hooked up to it. Send a command and see what happens or set the instrument up manually and see if you can reproduce that via remote control.

  • How do I restore the settings for apps using Time Machine?

    I believe there are problems with items within the Library Folder inside the System Folder.  For example, there are two "Frameworks" Folders, but one has "(from old Mac)" after its name.  I dare not try to remove or even move either.
    Back in the day of OS 9, you could modify something, then search for it by "Last Modified" Date, and find where Apple has hidden itscontents.  It's not so easy in OS X.  I've had some success using Pondini's Time Machine FAQ's, though.  Here is how I got to this problem:
    Our family MacBook died.  After getting a repair estimate of $500 to $700 "if it's the Logic Board," we decided to replace it.  We purchased a MacBook Pro running Lion.  (Later, we brought it to an Apple Store and were quoted $435 in house or $280, but they would have to send it out.  Incredible repair: Logic Board, Top & Bottom Case, Super Drive, Battery, all for $280.  No wonder they're #1).  I pulled the Hard Dive out, erased it, and installed an older operating system, but during the repair they installed 10.6.
    Restored the MBP from the TM backup of the MacBook. OK
    The Macbook is repaired and the store showed me how to restore the data from the TM backup.
    Restart and the passwords do not work due to restoring a 10.6 machine from a 10.7 backup.
    Tech support guides me through resetting an admin password using the password utility on the install DVD.
    changed the other passwords inside of Accounts in System Preferences.  Then changed the password or the other Admin.
    Restart, get a circle with a line through it.
    Tech support guides me through fixing this.
    Restart, half my Apps do not work.
    Tech support says to re-install 10.6.
    I did but I thought it would erase and install but it just re-installed 10.6.
    Most Apps work, except iPhoto.  Mail is OK sending but only receives on one of 3 accounts.
    Is there a fix for iPhoto & Mail?  If not, I would plan to erase and use the finder to drag the user folders from TM to the MacBook.  Can I just drag the Apps too?  How about all of the settings for those Apps?

    If you don't keep a backup, you can't restore your machine to any state except the state in which you received it, brand new, with none of your own stuff on it. That makes a pretty convincing argument for backing up, doesn't it?

  • How can I display the range for LastFullMonth in the header of a report

    How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009)  displays sept 2009 in the header even if there is no data selected by the report?

    Good,
    Sometimes I answer these questions and completly miss it....
    ( lack of understanding on my part )   

  • How can we specify the Mailbox for Notes?

    In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
    Thanks in advance.
    Message was edited by: Ekapon

    You could use the DecimalFormat or NumberFormat to do the job.
    double number 1234.567;
    DecimalForamt df = new DecimalFormat("###.##");
    String s = df.format(number);or
    double number 1234.567;
    NumberFormat nf = NumberFormat.getNumberInstance();
    nf.setMaximumFractionDigits(2);
    /* if needed.
       nf.setMaximumIntegerDigits(value);
       nf.setMinimumFractionDigits(value);
       nf.setMinimumIntegerDigits(value); */
    String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

  • HT204053 i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    i have an apple id on my ipod & another for my macbook & iphone.  how do i change the id for my ipod to match the one for my macbook & iphone?

    To change the ID:
    For iMessage, go to Settings>Messages>Send & Receive (Receive At in iOS 5), tap the ID sign out, sign back in using the other ID.
    For FaceTime, do the same thing in Settings>Facetime.
    For Purchasing, do this in Settings>iTunes & App Stores (Settings>Store in iOS 5).
    For iCloud, you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account.  Before deleting the account, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll or you will lose them.  To do this, open the photo stream album in the thumbnail view, tap Edit, tap all the photos you want to save, tap Share, then tap Save to Camera Roll.  Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. When prompted about what to do with the iCloud data, be sure to select Keep On iPod.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.

  • How can I reduce the selection for the characteristics value in a BW query

    Good morning,
    I need to find out how I can reduce the selection for the characteristics values in a BW query.
    In a BW query I have a characteristic "Due month".
    The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view,  without deleting the data for the other years in the cube.
    Do you know how this can be done?
    Thank you in advance for your feedback.
    Kind regards,
    Linda Verding
    Staff Consultant - CSC

    hi,
    First thing you have to do is check the report how the data is being restricted only to those months.
    1) one it can be variable in which the code is written for that to populate for last few years.
    or else it must have been hardcoded for these months.
    Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
    You need to change this here in the report.
    You dont have to delete anything there.
    Regards, Siva

  • HT1918 I cancelled a payment through PayPal. How do I update the payment for that charge?  I looked at my payment information and it has my credit card information.  I'm not sure where to update the PayPal part of payment.

    I cancelled a payment through PayPal. How do I update the payment for that charge?  I looked at my payment information and it has my credit card information.  I'm not sure where to update the payment that was associated with my PayPal account?  I am not sure what that paid for?  I am trying to process updates on my IPhone & IPad for apps. I have already downloaded. 

    Hi Xellana, and a warm welcome to the forums!
    I'm looking for information and pricing on possibly upgrading the processor from the PowerPC to Intel.
    While anything is possible if you had enough money... NOPE, you can't change the CPUs to Intel, nor can you get any faster PPC upgrades for it. It'd be far cheaper to buy a new IntelMac than to replace everything inside the G5, and I mean just about everything, then figure out how to machine the case & such to mount Intel Logic Board, Graphic Card & such.
    Sorry.

Maybe you are looking for