How do i prevent a slide that is after the quiz results page from showing?

HI guys, I am trying to achieve the following in Captivate 6:
1) Users answer questions. They have 2 attempts to pass with 70% or above.
2) At the quiz results page, if the score is less than 70%, users get a button to retake the quiz. After the second attempt, If the percent is 70% or above, they can click a button to view a certificate or click a button to see a transcript. If the percent is less than 70%, they click a button to get a transcript but NOT a certificate.
How can i accomplish this since i cannot add buttons to the quiz results page.

Thanks for the feedback.
I am trying to implement a simple hide/show routine and it does not work. This is what I want.
I have two buttons (one to save a certifcate and one to save a course transcript).  I want to display those on the quiz results screen. The user has two chances to make a 70% or more on the quiz.
If the user obtains less than 70% score on the first try, on the quiz results slide I want to hide the button to save the certificate but keep the one for the transcript. If the user passes with 70 or more, then both icons remain on screen.
IF the user obtains less than 70% after the second try, the quiz results should only show the transcript button. If they pass with 70% or more, then both icons remain on screen.
I tried advance interactions to hide or show the icons in the "on slide enter" on the quiz results screen but that did not work.
This is an example of what i tried. if cpQuizInfoQuizPassPercent is less than 70% hide btncert. I also tried hiding the button and then assigning actions to show the button on passing the 70% but that did not work either.
Suggestions?

Similar Messages

  • How to allow learners comment about course after the quiz result page?

    How do I go about allowing the leaners to comment on the course they have taken which should appear after the quiz result page. And how can their comments be send to us or reported back to us in some form so that I can see what their comments were.

    Check the settings for each quiz question to verify they are set to report a score to the quiz.  At the moment, from what I can see in your Advanced Interaction dialog, they may not be reporting to the quiz.

  • If stop cloud license, how transfer to latter win pc (that cloud terminated) the dw cs6 license from

    I have two win PC(laptop+desktop) dw cs6 license
    another win and one mac cloud cc all license...
    If stop cloud license, how transfer to latter win pc (that cloud terminated) the dw cs6 license from first PC(i do not want it here is old PC)? needed delete / unistall cloud adobe programs after stopped?

    Run Help --> Deactivate inside the programs, then install them on whatever computer you want them to be on.
    Mylenium

  • How do I only get certain questions appear in the quiz results?

    I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
    Can anyone advise how I can only get certain questions appear on the quiz results please?

    Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
    Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
    And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
    Lilybiri

  • I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    Go back into Quiz, Preferences, Pass or Fail. Uncheck 'Retake button' and check it again, it will reappear on the Score slide.

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • How do I get the Continue button on the Quiz Results page to work?

    I found an older discussion about this topic and tried everything suggested. My colleague and I have been researching this issue and have yet to find the answer. Does anyone out there have the solution?

    Maybe yesterday you succeeded, passed. In that case the Continue button will work, because it triggers the action that you specified in the Quiz Preferences (Continue). But if you fail, you are stuck on the Results slide, because the Continue action for Failed will only be done after the attempts are exhausted. Why did you create an extra slide? You can edit the Results slide, but please, keep the buttons that are embedded in that slide because they provide the functionality that you need.
    You can add a shape button to the Score slide if you want an extra button to retake the course.  I hope you are using CP6 or later?
    http://blog.lilybiri.com/question-question-slides-in-captivate
    http://blog.lilybiri.com/question-question-slides-part-2
    http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
    Lilybiri

  • How do i create a chart that will update in keynotes or pages from numbers?

    I created a table in Numbers and want to export it to Pages and Keynote. I want the changes made in Numbers to Show in Pages and Keynotes.

    Hi edwill,
    In iWork, I don't know of a way to link between documents. If you are looking for a way to update a Pages or Keynote document automatically when you update a Numbers document, I don't think that is possible. Perhaps someone who is an AppleScript guru can call in to help you.
    Regards,
    Ian.

  • How to retain the master slide background at the end of the quiz reporting page of a project

    I have noticed that the content of the master slide is not retained till the end in the quiz results page of the project. What should I do to retain the contents till the end of the project?

    Hi,
    Thanks for your time. I have checked the transitions. i didnt give any transition to the slides in the project and i also check the preferences too, i had disable the options that is to fade in and fade out. My problem is "I have 12 slides in this with an intro slide and 10 question slides and then the quiz results page. In that result page, it is showing the result at the end of the result slide the pause button in the skin turned to play button. While clicking that play button it shows only the results, review quiz button and retake quiz button only. It doesn't display the images, widgets, text and some other options which is used in master slide or in the slide itself " Why those things have disappeared? Can you guide me how to overcome this issue.
    The solution for the playbar is quiet good. One more doubt in that, The play bar should be displayed in that page but it should be disabled, Is there any solution for this? If yes, kindly share with me

  • It will not let me edit the quiz result slides length.

    I need to edit the length of time that the quiz results page is on the screen. It will not let me edit it. Also the continue button does not work.

    The Quiz Results slide will always pause and there's no way to prevent that.  Look at its timeline and you can see a faint vertical line that indicates the pause point.  You can use your mouse to move this sideways and delay the pause untill objects enter the timeline.  But the rest of the slide beyond that pause point will only play once you click the Continue button.  If you have set a very long duration for the Quiz Results slide, then once you click Continue, what you see as the Continue button not working could just be the timeline continuing to play until it reaches the end of the slide.  Watch the scrub bar on the playback bar to see if it's moving.
    Once the slide is paused the user has to click one of the buttons on that slide to move elsewhere.  If your Continue button is not working, the usual reason is that you have the Quiz > Settings > Required option set to something that will prevent the learner from moving beyond the Quiz Results slide until they fulfil some kind of requirement (e.g. answer all questions or pass the quiz).  So check that setting.

  • Jump to slide "X" when failed the quiz.

    Hello,
    I'm testing a quiz I have for a project. When the participant passes the quiz I just set it to "continue" and the close project. Works without any problem.
    The issue is instead with the participant failing the quiz. I've set it to "Jump to slide X" so he/she can do the course from the beginning. When I test this it works fine the first time, when I then do the quiz again and fail and want to jump back to the beginning I get a blank slide. Any ideas on why this happens? I've tested several times and always get a blank slide on the second time around.
    I'm using Captivate 5.
    Kind regards,
    Patrik

    Hi,
    Thanks for the reply.
    I have the option to retake quiz as well. I would like to give the option to retake the whole e-learning as well.
    I did a work around where I inserted a slide after the quiz result where I have a button which takes me back to slide 1. That works as planned, but it would be great to reduce the number of clicks.
    Kind regards,
    Patrik

  • How to remove the NEXT button on the Quiz Results?

    I can't find a way to get rid of the NEXT button on the Quiz
    Results page - I want the results emailed, but if they click NEXT,
    it hoses the email process.

    Nevermind. Apparently, this is a "feature" that can't be
    turned off.

  • TS1398 an unprotected wifi network brings up the log in screen that goes to the apple home page. how do I prevent this?

    an unprotected wifi network brings up the log in screen that goes to the apple home page. how do I prevent this?

    This seems to be the best working option (while not 100% success):
    From Demo:
    Try this.
    Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • How can you prevent encrypted folders that you created in disc utility from being deleted?

    How can you prevent encrypted folders that you created in disc utility from being deleted?

    bibst wrote:
    How can you prevent encrypted folders that you created in disc utility
    You cannot create encrypted folders in, or encrypt folders with, Disk Utility.
    You can create with Disk Utility encrypted disk images from folders. I assume that's what you mean.
    The proper way to do it is by setting the immutable bit. Read here
    <http://www.thexlab.com/faqs/immutableflags.html>
    about the immutable bits (and the trouble they sometimes create).
    The user immutable bit (uchg) is the same as the Finder lock, as described above by X423424X. It's a weak lock, with only a warning.
    The system immutable bit (schg) is more powerful. Once is set, the item cannot be deleted in Finder (even though Finder will ask for your password and may give you the impression that it can trash it; it will end with an error).
    I set it in Terminal, thus
    $ sudo chflags schg my_encrypted_disk_image
    and unset it also in Terminal
    $ sudo chflags noschg my_encrypted_disk_image
    (Note that, when you unset the system immutable bit, the change won't be reflected immediately in Finder, but the item can be trashed nevertheless.)

  • How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

    Installed: Firefox 27. ReminderFox 2.1.4. Windows XP Professional
    Since ReminderFox 2.1.4 was installed, I have deselected the 'Status/Add-on Bar Display 'Bow' and text on status bar' numerous times, but the setting never takes effect even after pressing the Apply and OK buttons.
    The Add-on Bar, which has always been deselected from the View > Toolbars menu, shows as selected in the menu, and even though I deselect it manually, when I close Firefox and then reopen it, it shows again as selected in the menu.
    How can I permanently prevent the Reminder Fox icon (in the Add-on Bar) and the Add-on Bar from showing?

    It is possible to uninstall the add on or to customize the add on toolbar from the Toolbar Customize option. To troubleshoot this try this article [[How to fix preferences that won't save]]

Maybe you are looking for

  • IPC Pricing routine for Product Family Margin in Quotation is not working

    Hi, I am working on the IPC Pricing Routine to calculate Item's Product Family Margin in the Quotation.  Process followed: Step 1:  Created a Group condition ZPFM for Product Family Margin and assigned to the pricing procedure.  Step 2:  Created a Va

  • How can I move my music to my new iMac?

    I've copied over all the music from my other computer to the new iMac, but iTunes doesn't see any of it, nor do any of the playlists show up. I've gone into the prefs and properly assigned the folder containing all the music to it, but nothing shows

  • Issue in Updating Date Fields in JDBC

    Hi Experts ..   I am having issues in updating date fields in Oracle Database. My Sender Sends date in format 2007-05-19T14:34:55.0000000+02:00 Can any one please suggest me how does the above format can be updated in JDBC with format 2007/05/19 Than

  • Opening files through mini bridge, from within photoshop.

    When opening files/images from within photoshop use adobe mini bridge, the files open slowly with a long delay? Can't figure out why, but when files are open directly from photoshop it is lightning fast. Running on a iMac OS X Yosemite Version 10.10.

  • Need help writing a code for this program

    Design a code that reads a sentence and prints each individual word on a different line