How do I prevent audio clicks at the borders of cut audio regions?

There must be a simple automated way to prevent this without editing each audo file individually. I tried selecting the regions and setting up fade in/out or crossfade in the inspector, but that does not seem to do it. When I edit the audio file in the editor, the audio click goes away, but this takes too much time.

Crossfade didn't seem to help, but selecting the regions and setting the fade in and fade out in the inspector to as little as 2(msec?) seems to get rid of the pops. Thanks!

Similar Messages

  • How do I prevent Mail from Zipping the attachment?

    When I send a .pages file by e-mail, Mail zips the file to .pages.zip.
    The network software at this University blocks .zip. How do I prevent Mail from zipping the file? I tried turning off the "send windows-friendly", but but still zips.

    Assuming this is iWork '08 or earlier, the "documents" are actually packages. A package is really a folder hierarchy. A folder cannot be emailed unless it is archived somehow. Mail does this automatically; most other email programs would be incapable of sending a bare Pages document at all.
    You could use some other non-blocked archive format, like tar or StuffIt. Or maybe you could rename it so that the mail servers don't recognize it as zip. You would have to instruct your recipient to rename it back. I understand that iWork '09 archives documents by default, although they are not named .zip, so that should be no longer an issue.

  • How do I prevent Firefox from "cycling" the tabs?

    How can I prevent Firefox from cycling the tabs?
    I like my tabs where they are. I have a good memory. If a tab is at the left, I want it to stay at the left. I do not want firefox to move the activated tab around, under any circumstance. Where there's code in the Chrome to make a tab move without the user dragging it, I want an option to prevent this from ever ocurring. Movement of tabs is very disorienting. I am not talking about scrolling. I am talking about when there are 6 tabs open and the rightmost 5 keep changing places without user interaction.

    You can check the home page setting.
    *Tools > Options > General > Startup: Home page
    *https://support.mozilla.org/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    If you do not keep changes the you can check for problems with preferences and try to rename or delete the prefs.js file and possible numbered prefs-##.js files and a possible user.js file to reset all prefs to the default values.
    *http://kb.mozillazine.org/Preferences_not_saved

  • How do I prevent Premiere from placing the scratch disk onto the 'same as project" folder

    I start a project by resetting the default scratch disc settings from “same as project” (which is on my “G” drive) to another hard drive where I have always stored defaults on CS3 (the “D” drive). I never had to redo my scratch disks when I created a new project in CS3. Now I need to redo them every time. If I open an older project in CS5 it automatically places all scratch disk files onto the G drive. How do I prevent Premiere from placing all scratch disk information onto the G drive before I open an older file? By the time I get around to changing the location, Premiere has already begun saving scratch disk information on the wrong disk.
    However I have another related problem. When I import an older project to nest it in a new project, the scratch discs mysteriously change back from the D drive where I set it up to the “G” drive. I finally discovered this when I reopen the project and all previews disappeared and it had defaulted back to the G drive.

    Thanks. Now I know that anytime I import a CS3 project file into a CS5 project, that it will change the whole project scratch disk settings to the default without warning. 
    One wouldn’t think that just one imported file would change the whole overall project file (out of many imported files…not project files that do not); it is odd that Premiere changes the setting of the new overall Cs5 project without warning.

  • How come when I double click on the Contacts icon, my contacts do NOT open

    When I double click on the Contacts icon, how come the Contacts file does not open?

    THANKS...I did single click & my contacts do not display as they usually do.
    Tried to delete the icon from the dock & opened Applications & moved the Contacts icon to the DOck, but this didn't solve the problem. 

  • If I add a pic from address book to an eMail, how do I avoid anyone clicking on the pic seeing all my address book notes and data

    If I add a picture from my Address Book to a mail message, anyone clicking on the picture can see teh entire address book entry, including private infor, passwords, etc.  How do I avoid this?

    delete and re add the contact?
    you could also try retyping and saving the information.

  • How can i prevent mail from downloading the same messages over and over again?

    is there any way to prevent Mail from downloading the same messages over and over again? Mail has a minimum of "50 recent messages" to download, but i hate having to delete them every time i check for new mail! why doesn't the program remember if you have already downloaded a message, and suppress any subsequent downloads???

    Same issue since Mavericks.

  • My Thai language song titles change to random symbols when added to iTunes. How can I prevent this and get the titles to appear in Thai?

    My wife bought a Thai mp3 CD. When saved to the mac the titles appear correctly in Thai language. When we use iTunes to search for music and import these songs, iTunes changes the Thai language character to random symbols basically making the titles illegible, and the playlist unuseable if we want to select any songs by title.
    Any idea how I can get iTunes to display the song titles correctly (in Thai language)? i.e. as they are in the folder that the songs are saved in?
    Thanks a lot if anyone can help...

    To display right in iTunes the ID3 tags have to be in Unicode.  This app may help:
    http://www.macupdate.com/app/mac/15953/id3mod

  • How do you lock audio regions?

    Hi,
    I am looking for a way to lock my audio regions so that their length cannot be modified. Lock SMPTE position does not accomplish this...
    Is there a way?
    -patrick

    Greetings IA,
    Sorry but I don't know of a way of doing that. There's no keyboard shortcut, no Edit command and no combination click. You might be able to help yourself by using the local menu Edit > Select Used to identify those bits of audio in your arrange window or you can:
    Go to the arrange window
    Edit > Select All
    Return to the Audio Window
    View > Group files by > Selection in Arrange
    That gives you an Audio Window view with all your used files bundled together so you can lock the individual clips. Sorry I can't help any more than that.
    Looks like an omission to me and you could always pass it to Apple as an enhancement request.
    Pete

  • How do I get FCP to count the number of cuts in my sequence?

    Can anyone help me with this? Is there a command or short cut to getting FCP to count the number of cuts in my sequence? I've edited together a 75 minute film, and I need to find out how many cuts there are in it, and short of doing it manually (which would take forever), I'm at a loss for a solution. Thanks so much!
    Best,
    Marianne

    Hi there,
    Thanks for the answer. I did that, but a couple of master clips showed up in the bin, that I wasn't using in the movie. Not at a lot, maybe 10-20 out of almost a 1000. Then I found a better way. I pasted the whole film into a new sequence, removed all sound and text, so it left only the video clips, and I also tried as much as possible to group all the clips on the V1 track of the timeline, and then I selected show item properties (with the whole sequence highlighted) and FCP shows a warning to the effect: "Can only show the first 100 clips out of ???, in my case it was 963.

  • Without updating any plugins, how do I prevent, remove or disable the requirement to "Click to Activate Plugins?"

    I want to reverse, undo, prevent, disable or even remove the following (see link below), WITHOUT having to change versions, or update actual plugins:
    https://support.mozilla.org/en-US/kb/why-do-i-have-click-activate-plugins
    I repeat, WITHOUT having to change my Firefox version, change the plugin version, or UPDATE versions on either.
    I want Firefox to quit bugging me about having to ACTIVATE a DEACTIVATED plugin.
    I DO NOT want to UPDATE VERSIONS of plugins or the browser and I DO NOT want to have to "click to activate plugins."
    It seems that Firefox collaborates with plugins to determine if the vendor has put out a new update. If there is a new update, Firefox inconveniences me.

    My security is none of your business. You are intruding into personal life of any person using your browser. Your market share is already going down. For me, FF browser is on the borderline, but it looks like the balance is moving to the side of FF being too intrusive. Only few month ago I managed to to block your automatic updates, now you are bugging me with every pdf file I open. Could let me decide if they are dangerous or not?

  • Prevent right click on the page....

    hi all,
    i am displaying digital signatures in the footer ,and i want to prevent the copy of any item from the page actually i came up with the code it is A JAVA SCRIPT CODE ,i tryed it on one page i created ,but if you want to apply it on the APEX where i have to add the code ,,,,
    Thanks in advance ,
    Ahmed

    Hello,
    Of course it depends on how you implemented it but most likely you will want to add it to your HTML Header or in the Page Template.
    One thing to understand is depending on javascript for security is a bad thing. Even though you have disabled javascript for right clicks there are literally hundreds of ways to get around that.
    The simplest would be for someone to use the save the page
    File > Save Page As
    And then browse the page source at their leisure.
    Carl

  • How to update JTable when clicking outside the table?

    Hi
    (Sorry if this has been asked before but I can't seem to see exactly how to do this from previous posts.)
    I have a JTable which sits on a jPanel which itself is part of a frame.
    When I click anywhere outside the table when I'm editing a cell in the table, how do I end the edit mode of the table (so that the cell is updated with the new contents).Currently I can only update a cell's contents during edit when hitting 'enter' or by clicking on another cell within the table.
    It seems that the following code is used in the process but I'm sure that I'm still missing something:
    if(table1.getCellEditor()!=null)
    table1.getCellEditor().stopCellEditing();
    If anyone out there knows how to do this,I'd really appreciate hearing how.
    Thanks a lot
    LGS

    Thanks for your comments but I'm still having problems.
    When I add the following code:
    table1.addFocusListener(new java.awt.event.FocusAdapter()
    public void focusLost(java.awt.event.FocusEvent evt)
    if (table1.getCellEditor() != null)
    table1.getCellEditor().stopCellEditing();
    and then try to edit my table,as soon as I double click on any cell in the table,my setValueAt method in my Table Model is being called before I even edit the cells contents. The above code is in the same method in which I actaully create table1 i.e.createTable().
    Can anyone help?

  • How do i disable auto-click in the bookmarks bar?

    I recently went to FedEx to track a package and I save the link in the bookmarks bar. When I show all bookmarks the display for the bookmarks bar shows a column between the name and the url. The title of the column is "Auto-Click".
    How did this happen and, more importantly, how do I get rid of the Auto-Click column?
    This is on an iMac (intel) running OS X Lion. The Safari version is 6.0.3.
    Bill aka VMS Mangler

    Settings -> General -> Keyboard -> Auto-Correction -> OFF.
    But this is a global setting, not just for the Mail app.

  • How can I prevent Firefox from opening the file I create when I print a page with PDF Create! 5

    After I print a web page using PDF Create! 5, Firefox opens the file so i can view it. Before I print, I select print properties and disable "view resulting pdf". However, the file is always opened in Adobe Acrobat, although I believe I have Adobe Reader set as default. I do not want any file to open. This happens on my non-privileged accounts. On my privileged account, the file is not opened. I have removed Firefox profiles, re-installed Firefox, Reset Firefox in Help-Troubleshooting. PDF Create!5 print screen can only be viewed in a host program such as Firefox, Libre-office Writer, or any other program that prints. They do not open the file either.

    Thanks for your help. This is the Scansoft (Nuance) program. What I do not understand is why when I tell the print driver not to open the file with a privileged account, it obeys me. I am not sure where in the registry I would look for the information. I do not want to, but perhaps I should remove the Adobe Acrobat program (temporarily?) - then what would it do? Again, when I print from other programs - browsers, wordprocessors, etc - the file is not opened after printing, just with FireFox. I guess I can live with it, I have spent too much time already.

Maybe you are looking for