How do I prevent multiples of the same page downloading without a force quit?

When I click on a link to download, Firefox 3.6.17 starts trying to download the page quickly over and over without success increasing in speed. I must do a force quite to stop this repetitive action as the many pages build up on my screen. This doesn't happen if I try it with Safari. I have FireFox for the MacBook. My laptop is 3 yrs old.
Thanks in advance!

Sounds that you have selected the Firefox application for a file type that it doesn't support.
See:
* https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

Similar Messages

HOW TO PUT TWO PANNEL IN THE SAME PAGE

HI ALL
I NEED TO KNOW HOW TO PUT TWO PANNEL IN THE SAME PAGE TO FULLY UTILIZE FULL PAGE AREA BECAUSE THE PANNEL WIDTH IS TOO SMALL , SO I WANT TO MAKE THE PAPER CONTAIN TO PANNELS VERTICALLY.
THANK YOU

So Barb,
I like to use multiple desktops and move back and forth between then using gestures. At the moment I have 5 open: Chrome, Firefox, Safari, Photoshop CS 6 and a desktop. I use "gestures" to navigate between them:
Mac Basics: Multi-Touch gestures - Apple Support
and I use Mission Control (F3) to move the various desktops around in the order I want them.
Mac Basics: Mission Control - Apple Support
So say I'm searching for a photo to open in CS 6, I find it on the open desktop then hit select "open" in CS 6 and go to that folder in the select pane.
Even right now I'm typing this in Safari and "gesturing" back to Chrome where I did the search about multi touch and mission control. I drag copy the URL there and gestured back here to paste the URL into this text.
If you did a lot of photo searches, I set professional clients of mine in Chicago up with dual monitors (In this case you'd have an external monitor on extended desktop.). So all you need to do is just glance over at the second monitor slide your cursor over there open stuff up find your photo and go back to Photoshop and open it up.
Hope this helps.

HT4463 How do I get back to the same page I was on?

When I have finished reviewing an app, if I click the back arrow in the top left corner it takes me back to the first page of the category. Not very user friendly when there are dozens of pages to click through to get back to where you were. How do I get back to the same page I was on?

This is what I mean: The users guide gives me all these instructions. BUT, it does not give instructions to just STOP. I don't
Pause a song
Tap .
Resume playback
Tap .
Raise or lower the volume
Drag the onscreen volume slider or use the iPad volume buttons.
Restart a song or a chapter in an audiobook or podcast
Tap .
Skip to the next song or chapter in an audiobook or podcast
Tap .
Go to the previous song or chapter in an audiobook or podcast
Tap twice.
Rewind or fast-forward
Touch and hold or —the longer you hold the control, the faster the song rewinds or fast-forwards.
View album art full-size
Tap the album cover when playing a song.
I don't want to pause, resume playback, restart or any of these things. i just want to STOP. How do I do that?

How can I POST data within the same page if I have a A HREF -tag as input?

How can I POST data within the same page if I have a <A HREF>-tag as input? I want the user to click on a line of text (from a database) and then some data should be posted.

you can use like this or call javascript fuction and submit the form
<form method=post action="/mypage">
cnmsdesign.doc
</form>

How to remove links pointing to the same page?

I have PDF documents with Links which point to sections referenced (e.g. link of text "Section 2.2" points to the actual page number of "Section 2.2"), but as the links are created from cross-references during rendition from Word to PDF, there are cases that the destination page number and source page number of the links are the same (e.g. links of text "Section 2.2" on page 9 are created with the destination of page 9 which is the actual page number of "Section 2.2"), I want to remove all these links, but I don't know how to get the destination page, I check the API reference and find that "PDLinkAnnotGetAction" may work , but I don't know how to use it, could you check me codes below and advise ? Your help is really appreciated!
PDPage page;
ASInt32 i,i2;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pdDoc = AVDocGetPDDoc (avDoc);
int pageNum = PDDocGetNumPages(pdDoc);
for (i = pageNum - 1; i >= 0; i--)
page = PDDocAcquirePage(pdDoc, i);
int annotNum = PDPageGetNumAnnots(page);
for (i2 = annotNum - 1; i2 >= 0; i2--)
if...
PDPageRemoveAnnot(i, i2);
My Product Information:
Acrobat Pro 8.1.6, Windows

Start by reading the PDF standard (ISO 32000-1) to understand Actions vs. Destinations.
Then for each annot, you'll want to see which it has (and in the case of an Action, if it has more than one). Then you need to parse the action or dest to see what it is and where it goes. If you don't like it, then you'll delete it.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 25 Oct 2011 09:25:32 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How to remove links pointing to the same page?
How to remove links pointing to the same page?
created by OALD<http://forums.adobe.com/people/OALD> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/3989576#3989576

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

How do you handle multiple at the same address?

My wife just got an iMac. She is using the Birthday feature in Address Book and iCal to track our friends and family birthdays and anniversaries.
Question:
How do you track it when multiple people are at the same address? For instance, our friends are a family of four, but they all live at the same address. Do you need to make a separate Address Book card for each of them, even the 1 year old baby? Or can you track multiple people in a single card with custom fields?
If you do need to make multiple cards, then how do you handle mailing lists? For instance, if I make separate cards for all four of them, how do I make sure I only send on Christmas card when I use my Mac to print labels?
Thanks for any advice.

This is really an issue that you're going to have to resolve yourself since Apple's address book isn't really built with this in mind - darn it. For me there are three scenarios. First, a singleton. No problem. Second a family for which all members share the same information - acquantences to whom I don't send birthday greetings. These get one card and I'll put in both (or all) their names in the first name field (as in Bob and Jean). If there are children, in the last name field I'll add 'and Ken' or 'and the kids'. Third, a family for which some fields are different - perhaps cell phone number, birthday, etc.
For mailing purposes, I create a holiday group and put the people I'll be sending cards to into the group.

Wait on Notification from Multiple behaves the same with or without History

I'm running this VI on a cRIO-9066, and both "Wait" functions behave the same. After reading the LV Help, I would expect the "With Notifier History" one to return an array of two elements, not one. Is this a bug?
(Attachment is LV 2014 SP10
Solved!
Go to Solution.
Attachments:
Untitled 2.vi ‏11 KB

Staab_Engineering wrote:
After reading the LV Help, I would expect the "With Notifier History" one to return an array of two elements, not one.
Why? Unlike the help for W4MN, the one for W4MNWH is not explicit in saying that it continues as soon as one of the notifiers gets a notification, but it also doesn't say it will wait for all of them. Your example clearly shows that it continues as soon as at least one has a notification.
I'm too tired at the moment to work through the W4MNWH use cases, so I have no particular expectation for how it should behave.
Try to take over the world!

How do I put multiples of the same button in different places on my tool bar?

I'd like there to a new tab button to left of the address bar and to have the option of also clicking to right of my tabs as well. Like the old version. The customize toolbar option only allows me to use one button of each kind, and I'd like to have multiples for this and perhaps other uses.

Sounds that you have selected the Firefox application for a file type that it doesn't support.
See:
* https://support.mozilla.com/kb/Firefox+keeps+opening+many+tabs+or+windows

How to fill out multiples of the same form without having to input e-mail every time?

I am making a almost check list for my boss while he inspects die cast machines. He would also like to use the form so clients can fill the form out themselves and send them to us. Problem is if my boss is inspecting 10 machines it doesn't make sense if he he has to input his e-mail in the e-mail tab everytime to know that he filled one out on my end.

Hi,
You could use a selection field instead, so the user won't need to type the email address each time. For example,
https://adobeformscentral.com/?f=oFQeHv8LulqFPP0b36Zq6A
Hope this help.
Perry

Keeping heading and detail on the same page

Hi, I have a report with a group header section and a detail section. How can I keep the heading section and all the detail section on the same page without starting each group on a new page?
The detail section will have either 2 or 3 records with some of the objects set to grow if the data doesn't fit on one line. This results in several changes of group appearing on the same page which is what I want. However, what I don't want is the header section on one page with the detail section on the next, or the header and some of the detail records on one page with the rest of the detail records on the next. What I would like is the report to start a new page if the header and all the detail records don't fit on the same page but without starting a new page for every group change. How can I achieve this?

you can put the group header and details into a sub report on the old group header section.
then hide the details section

Links between portlets on the same page

Hi,
I want to search for an employee in a poplist. When I choose one from the poplist I want a report to start that will show all the projects he is working in.
The above happens but when I put my form as a portlet on a page I want the report to start in another portlet on the same page. Now it opens in a new window and that's not good.
This is how the link works.
On the link in the form I have a call 'javascript:runrep()'
On the form, in the 'Form text' section, in the 'Footer Text' I added the
code for the runrep function (given below).
<script>
function runrep()
var formObj = document.forms[0];
var pers_id;
for (var i=0; i < formObj.length ; i++){
if (formObj.elements.name == "PERSONAL_SOK.DEFAULT.ID.01"){
//PERSONAL_SOK is the form name
pers_id = formObj.elements[i].value;
break;
var url="http://linux.ekn.se:7778/pls/portal/ppe_utv.ppe_visa_projektforslag.show?
//PPE_UTV is the schema_name and PPE_VISA_PROJEKTFORSLAG is the report
p_arg_names=pers_id&p_arg_values=" + pers_id;
window.location=url
</script>
I guess the url has to have another adress to open on the same page, but what?
/Jennie

The post below shows you how to link two reports on the same page. You can probably modify it's solution to achieve what you're trying to do.
Providing Oracle's default color pallete
Regards
Hsiu

How to pass a parameter from a report to multiple forms in the same page

Hi:
i have a report and a lot of forms in the same page. The fact is that i want to stablish a link over a filed in the report which would make some information appear in those forms so that information could be updated. For example: i have a report with company names. Over those names i want to put a link. When the link would be pressed the forms would reflect the information about that comany. Is this possible to be done? how can i do this or something similar?
Thanks.
Regards. Urko.

Please see post Re: session state security
It has been done for a single form in a page and can be extended to multiple forms as well.

How to load multiple HTML5 canvas on the same page (the proper method)

Hi,
I've been struggling to load multiple canvas animations on the same page. At the beggining I thought that exporting the movies with different namespaces and reloading the libraries in a sequential flow might work, but it doesn't. It always loads just the last animation loaded. More info here: Coding challenge: what am I doing wrong?
Here is a sample of what I'm doing:
1st: Publish two flash movies with custom namespaces for "lib" set in the "publish settings": "libFirst" and "libSecond".
2nd: Edit the canvas tags in the HTML page. One called "firstCanvas" and the other one called "secondCanvas"
3rd: Edit the javascript like this:
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsFirst = createjsFirst||{};
            var createjs = createjsFirst;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/first.js"></script>
        <script>
            function initFirstAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("firstCanvas");
                exportRoot = new libFirst.first();
                stage = new createjsFirst.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsFirst.Ticker.setFPS(libFirst.properties.fps);
                createjsFirst.Ticker.addEventListener("tick", stage);
        </script>
        <script>
            // change the default namespace for the CreateJS libraries:
            var createjsSecond = createjsSecond||{};
            var createjs = createjsSecond;
        </script>
        <script src="//code.createjs.com/easeljs-0.7.1.min.js"></script>
        <script src="//code.createjs.com/tweenjs-0.5.1.min.js"></script>
        <script src="//code.createjs.com/movieclip-0.7.1.min.js"></script>
        <script src="{{assets}}/js/second.js"></script>
        <script>
            function initSecondAnimation() {
                var canvas, stage, exportRoot;
                canvas = document.getElementById("secondCanvas");
                exportRoot = new libSecond.second();
                stage = new createjsSecond.Stage(canvas);
                stage.addChild(exportRoot);
                stage.update();
                createjsSecond.Ticker.setFPS(libSecond.properties.fps);
                createjsSecond.Ticker.addEventListener("tick", stage);
        </script>
<body onload="initFirstAnimation(); initSecondAnimation();">
Could someone please reply with the best practice on how to do this? If possible, without the need to reload all the libraries...
If I only need to show one flash movie at a time, would it be more efficient to cut & paste the canvas tag using jQuery in the DOM and reloading a different lib on it?
Many thanks!
#flash #reborn

I was able to fix it. At the end, it was easier than I thought. Just have to publish using a different "lib" namespace for each movie, load all the scripts at the end of the <body> and then add the following to the onload or ready events:
$(document).ready(function () {
        var canvas, stage, exportRoot;
        // First movie
        canvas = document.getElementById("firstCanvas");
        exportRoot = new libFirst.first();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libFirst.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Second movie
        canvas = document.getElementById("secondCanvas");
        exportRoot = new libSecond.second();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libSecond.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);
        // Third movie
        canvas = dument.getElementById("thirdCanvas");
        exportRoot = new libThird.third();
        stage = new createjs.Stage(canvas);
        stage.addChild(exportRoot);
        stage.update();
        createjs.Ticker.setFPS(libThird.properties.fps);
        createjs.Ticker.addEventListener("tick", stage);

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

I use "element 12" and want like in the old PS version due Automating and Contact II upload multiple filesand print them with any columns and rows on the same page . How does it work?

Can you supply a link?

How do I prevent multiples of the same page downloading without a force quit?

Similar Messages

Maybe you are looking for