How do I prevent offline files from syncing accross WAN

I have multiple sites connected via smaller WAN links (1.5 meg).  I am trying to prevent any Offline Folder Syncing across the WAN. 
When users travel to other sites there is an issue where their laptop wants to sync their MyDocs folder across the WAN.  Since the user has several Gig of Data at the remote site this could take all day and can consumes all of our bandwidth between
the sites.  This doesn't happen unless the users have their MyDocs folder set to 'make available for Offline Use'. 
The users MyDocs folder is automatically redirected to a network file server at the users main location.
I have tried setting the Network Transparency to 64 ms (64) but that doesn't seem to help.  Normal latency between sites (based off of a ping) is 75-100 ms (unless under heavy load).
Do you have any suggestions or recommendations?  I tried looking at the below technote but I couldn't seem to get a setting that made this issue go away.
https://technet.microsoft.com/en-us/library/ff633429(v=ws.10).aspx#BKMK_EnablingTransparentCaching
Any help you can offer will greatly be appreciated.
Thank you

Hi,
The article you looking at is not for preventing the offline file sync. So what's your requirement? If you don't want the offline file sync, just disable the it in the sync center:
1. Open the Control Panel, click on the Sync Center icon.
2. In the left pane, click on the Manage offline files link.
3. Click on the Disable offline files button.
4. Click on OK and restart the computer(see screenshot below).
If you want to sync the offline file, the guide you refer is the optimal solution for you. Since your file is too big. However, I suggest you sync it completely if you really need it when slow network or disconnection from the Server. It won't copy
the whole file every time. It just sync the new version of the file when it checked the file has be changed.
Karen Hu
TechNet Community Support

Similar Messages

  • How do I prevent iTunes 11 from syncing apps with my devices?

    I want to be able to sync music to my iPad and iPod but I do not want to store their apps on my computer. Since iCloud remembers which apps I own, this is (in my mind) unnecessary. How do I prevent iTunes 11 from syncing my apps? This did not use to be a problem because in iTuens 10 it was an option. Now it seems that it isn't.

    Cate Kurtis wrote:
    Well, in fact the application stopped opening automatically for no reason that is clear to me. For about 5 days after I updated the software it opened automatically when I plugged in or unplugged my phone. Then it suddenly stopped. All I did between the last automatic open and the time that it ceased was, in the options window, uncheck the "manually manage music and videos" option and then check it again without clicking "apply" and also checking "sync only checked songs and videos" and unchecking again without clicking apply.
    I can't really recall now, but I thought that I played around with those settings and no matter what, I never saw the Option for Automatically Sync when Connected in iTunes.
    I can think of no reason why this would halt the automatic opening but it has definitely stopped. Yet I still don't have the option listed in the options window to "prevent itunes from opening automatically when device is connected."
    This is all very strange to me but I can think of nothing to pursue it further.
    I can't think of any reason why it would trigger that behavior and of the other 170+ views that this discussion has received, I suppose that nobody else had anything to offer either.
    I can't think of anything else to pursue it further either and as long as it is working the way that you want it to work now, I can't think of any need to pursue it further.

  • How can I prevent iTunes 12 from syncing apps?

    I know that syncing apps to your computer backs the app(s) up so you don't have to download the apps all over again, but for me it doesn't hurt to start all over downloading all the apps one by one. I have an iPhone 6 on iOS 8.1.2, one day I started syncing the iPhone to the latest version of iTunes 12 on my Mac running Lion (10.7.5). I was trying to sync new music onto the phone but iTunes insisted on syncing all 50 or so apps, half of them about 500MB or more, then on the halfway mark iTunes would not respond, I force quitted, reopen iTunes, and get a popup saying "The iTunes Library.itl is locked, on a locked disk, or you do not have write permission for this file." I had to grab all of my music, books, and tones folder to my desktop, delete my iTunes library folder, and rebuild my iTunes library all over again putting all of my media back into the iTunes library folder. I did this so many times, sync, quit, rebuild library and get the same results. This irritates me because not only does it consume time, but it takes up space on my mac. Is there any way to prevent iTunes from syncing all of my apps to my Mac?

    There are services.sync.prefs.sync prefs related to which prefs to sync and you can set the corresponding services.sync pref to false to prevent syncing that pref.
    You can set the pref <b>services.sync.prefs.sync.browser.startup.homepage</b> to <i>false</i> on the <b>about:config</b> page.
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • Cannot Remove Offline Files from Sync Center

    I believe I have searched the history of Sync Center issues enough that this is an issue that has not yet been addressed.  If so, please point me to the proper article.  Thanks!
    I was making folders available for offline use in my Win 7 Ultimate edition.  We are in the process of moving to NAS servers (with new network names) and I know syncing with NAS servers is not working correctly right now.
    So I have unchecked all the folders to make then unavailable for offline.  I have also gone to "Manage Offline Files" and tried deleting all offline files for the network drive.  However, there is one Network Drive that I cannot get to delete no matter what I try.  I have tried Deleting Offline Copy for the drive (which it says is successful), but the network drive and a folder hierarchy remain when I view Offline Files.  Also, when I view this folder path in Windows Explorer, it gives a status of "Offline Availability: Available".  I find this odd since the Make Available Offline box is not set for any of the files or folders in this path.  Also, this message seems odd to me since the only valid messages I have found for this status are "Always Available" or "Not Available".
    I have also tried making all of these files and folders available offline again and removed and deleted, but I still have the same problem.  I have also tried the registry key to reset the cache for offline files and that did not work either.
    Please help me get rid of this because it is driving me nuts!
    Thanks.

    OMG!!!!THANK YOU SO MUCH!!!!You have no idea how long I've been trying to get rid of those files!I've had those files for about a year or longer & no one could tell me how to
    get rid of 'em,& plus I know a lot about computers(:/ I'm somewhat of a hacker too,you could say)so you(not you specifically,but people who are not knowledge based with computers)can only imagine how
    FRUSTRATING it is to not no the answer!I mean I had just short of
    50GB eating up space/memory on my computer,just because the other computer was renamed,and placed under a new server & wireless network;so I couldn't re-sync them under the same partnership because the associated computer wasn't/couldn't
    be found,even though I had changed the computer name back & tweaked both the server & wireless network to match the original proportions or requirements for the partnership!I mean I was even thinking of removing my hard drive & mounting to another
    computers hard drive(proverbially the partnered computer)to get deep within the system files without causing any structural damage to the motherboard or operating system(kinda like the time I accidentally compressed the boot the boot drive!:'(
    That was not fun,it took me about a week to repair that thing!)by some sort of computer failure!So I made this new Windows Live account(I forgot my other one)just to say thank you!This really helped!:)

  • How can I prevent personal contacts from syncing with Exchange corporate email?

    I have my phone synching with my work Exchange server over ActiveSync, and have 2 personal email accounts (POP and IMAP).  The 2 personal accounts are also configured in Outlook 2010 on my home computer.  Itunes is also installed on this computer. 
    I want my contacts from my 2 personal accounts to sync to my phone (which is working), but not have them sync to my work account (this part is not working the way I want).  I now have all my personal contacts uploaded to my work account.  How can I remove the contacts from my work account without removing them from my phone?

    Unless you are in the same household, the agreement for Mountain Lion does not allow the setup you have now.
    You need to spend another US$30 and buy an additional copy and get that other MacBook on its own unique Apple_ID.

  • Selectively Prevent Certain files from Syncing?

    I have some enormous mp3 files (~300MB) in my iTunes library (ambient background sounds that I use with my cans) And I would like to prevent these from auto syncing with my ipod.
    I am aware of two methods of doing this, however neither of these methods really do what I want.
    1. Have unchecked songs not sync to ipod.
    - This is what I typically use to selectively keep stuff on my 8GB nano, however the problem is that I am effectively no longer able to use these unchecked songs in iTunes like in playlists or shuffle mode, unless I specifically double-click on the file. Most importantly the files wont repeat even if that option is selected, and the file is manually double clicked.
    2. Manually Manage songs on ipod.
    - This is a real drag, considering that I only have 5~6 files that cause issue due to their colossal file size.
    Are there any other exclusion methods that I am unaware of?
    Thanks for the help.

    You could just put all the music you want synced to your ipod into a playlist and tell your ipod to just sync to that playlist.

  • How do i prevent removed apps from syncing when connecting to iTunes

    I've "removed" apps from my iPad to free up space but when I connect to my computer, the apps "appear" to still sync. 
    To the upper right of the screen, it will show there are 65 apps (I removed 20 apps).  These are active apps and that is correct  When I click on the status bar at the bottom of the screen (the Apps section), it shows there are 85 apps taking up space on my iPad.
    Also, where the apps are listed, the apps that were "removed" from my iPad air have an option to "Install".   I don't understand why they're still syncing.  TIA for your help!

    This does not help but it does offer some insight. I have NEVER noticed this before. Take a look at the dialog box in the is screenshot. Note that it says that even if the app is deleted from the iTunes library, it will not be removed for any iOS devices when you sync.
    As an experiment, I deleted the AOL On app from my iTunes library and followed the prompts to put the app in the trash - not keep it in the mobile sync folder. I synced my iPad - and the app is still on the device even though it does NOT appear in my list of apps in iTunes when the iPad is connected and selected. I have never seen that happen before.
    If the app is not in your library, I always assumed that it would be erased when you sync since it is no longer in iTunes. I deleted the app in iTunes and then deleted it on the iPad and then synced again and now it is gone everywhere.
    Bizarre....

  • How can I prevent a macbook from syncing with my ical alerts.

    I was attempting to share a photo stream from my ipod touch with a friend. At one point when I was trying to figure out how she could access it, I believe I entered my apple ID on her macbook to connect to the icloud.  She is now receiving alerts from my calendar.  How can we stop that?  What does she need to do on her end to disconnect?  Thanks.

    If you go to Settings>General>Restrictions>Accounts (near the bottom) and set it to Don't Allow Changes it will disable the ability to change any of the iCloud settings, or settings for other accounts including email accounts, FaceTime, FaceBook, Twitter, the iTunes & App store ID, etc.  That would be your only option.  Also, as you may know, if you set restrictions make sure you write down the passcode; if you ever forget it you will need to restore the device as new, without using an backup (or restore a backup made before the restrictions passcode was set), in order to remove it.

  • After installing Snow Leopard, how do you prevent FH files from booting Fireworks?

    Even if I choose "always open as" Freehand they still open in Fireworks when I double click the file. Any idea how to fix this? Thanks!

    Do a Get Info (command I) on the file, and in the info window change the "Open with:" to FreeHand MX. That works on my iMac running 10.6.1, and it opens the file subsequently with FH. What doesn't work is the "Change All..." telling the finder to open all similar FH documents with FHMX. I guess we need to wait for a future OS update to fix that.

  • How do I prevent my files from duplicating in a new folder when I go to package?

    I don't believe this used to happen and it's driving me batty!! I save a working document in a job folder. Then when I go to collect the fonts and graphics by "packaging" it won't allow me to package in that first level it creates another folder inside the job folder with the same document, same name along with the fonts and graphics folders. Needless to say having mutiple files with the same name is REALLY DANGEROUS!! I am positive this is something new that is happening. Probably something easly to fix - I just can't find it!

    It has always been this way. You can create the package folder anywhere you like, and there is no real danger in the duplication unless you lose track of wheter you are working onthe packaged copy or the original, but that's up to you.

  • Prevent .pdf files from automatically downloading in e-mail

    How do you prevent .pdf files from automatically downloading in an e-mail message with an Exchange account?

    Yes, that's a plausible explanation.
    Never having locked a Numbers document, I don't have first hand experience.
    I put my sensitive documents in an encoded disk image file. Less bother. But then, I'm not e-mailing sensitive documents or otherwise exposing them.
    Jerry

  • How do I delete the synced offline files from my iPhone?

    Hey people! I just unchecked "offline" for all my playlists on my iPhone to free up some memory. However the usage of the Spotify-App is still shown with 1GB. Is there any way to get rid of the cached songs besides reinstalling the app? Regards, Marius

    Peter wrote:
    Spotify are currently collecting information about this, since in theory that is what should happen
     No one from Spotify has posted since Meredith asked for user info regarding the bug. Generally that may not be so surprising as it has only been a couple of months. Howerver, it is not as it was news to the Staff. This thread:Help-iOS-iPhone-iPad-iPod-Touch/How-do-I-delete-the-synced-offline-files-from-my-iPhone is from spring 2012.
    My point is that I think it would be good if everyone experiencing this problem made some noise. 
    Regards,
    Martin

  • How do I move photo files from computer to ipad 3?  Sync is dimmed.

    How do I move photo files from computer to ipad 3?  Sync is dimmed.

    Could this be what you are experiencing?
    http://ipadhelp.com/ipad-help/sync-apply-buttons-grayed-out-in-itunes-over-capac ity/

  • ITunes error: The iPhone "iPhone" cannot be synced. You do not have enough access privileges for this operation. is preventing my iPhone from syncing. How do I fix it?

    The iPhone "iPhone" cannot be synced. You do not have enough access privileges for this operation. is preventing my iPhone from syncing. How do I fix it? I have changed permissions until blue in the face. What is going on? Why is this so hard? I just want to sync my phone.
    A little background. My iTunes library is in a shared folder. My Aperture library is on a .DMG in the shared folder with "ignore permissions on this volume" checked. I have added myself with read and write privileges to everything that I can find. What gives? Thanks in advance.

    PC, windows7, iphone4, updated iphone (5.0.1) and itunes (10.5.2.11) software. Started getting "iphone cannot be synced. You do not have enough access privileges for this operation" message.
    Solution I found that worked: Uncheck "Sync photos from Iphone" in Itunes / Devices / Photos tab.

  • How to prevent a file from stripping?

    I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
    # $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
    # Maintainer: dale <[email protected]>
    pkgname=vacation
    pkgver=1.2.6.1
    pkgrel=1
    pkgdesc="an automatic mail-answering program"
    depends=(gdbm)
    url="http://www.tosn.org/projects/vacation/"
    source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
    build() {
    cd $startdir/src/$pkgname
    mkdir -p $startdir/pkg/usr/{bin,man/man1}
    # keeps binary from building
    rm -rf vacation
    # fixing the Makefile - not only for arch64
    sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
    sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
    mv vacation.man vacation.1
    make install
    These file have been created:
    [andyrtr@workstation64 vacation]$ ls -lRA pkg/
    pkg/:
    insgesamt 0
    drwxr-xr-x 4 andyrtr users 96 2006-01-28 09:32 usr
    pkg/usr:
    insgesamt 0
    drwxr-xr-x 2 andyrtr users 96 2006-01-28 09:32 bin
    drwxr-xr-x 3 andyrtr users 72 2006-01-28 09:32 man
    pkg/usr/bin:
    insgesamt 24
    -rwxr-xr-x 1 andyrtr users 16864 2006-01-28 09:32 vacation
    -rw------- 1 andyrtr users 470 2006-01-28 09:32 vaclook
    pkg/usr/man:
    insgesamt 0
    drwxr-xr-x 2 andyrtr users 48 2006-01-28 09:32 man1
    pkg/usr/man/man1:
    insgesamt 0
    [andyrtr@workstation64 vacation]$
    I get this error:
    ==> Starting build()...
    gcc -march=x86-64 -O2 -pipe  -Wall  -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
    install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
    install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
    strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
    install: strip fehlgeschlagen
    make: *** [install] Fehler 1
    ==> ERROR: Build Failed.  Aborting...
    Krusader detects it as a Perl program. Any idea?
    AndyRTR

    Posted: Sat Jan 28, 2006 8:45 am    Post subject: How to prevent a file from stripping?
    I'm building vacation for Arch64 but should be the same for 32bit. PKGBUILD looks like this:
    Code:
    # $Id: PKGBUILD,v 1.1 2004/01/21 15:43:15 dale Exp $
    # Maintainer: dale <[email protected]>
    pkgname=vacation
    pkgver=1.2.6.1
    pkgrel=1
    pkgdesc="an automatic mail-answering program"
    depends=(gdbm)
    url="http://www.tosn.org/projects/vacation/"
    source=(http://www.tosn.org/projects/vacation/files/$pkgname-$pkgver.tar.gz vacation.patch)
    build() {
       cd $startdir/src/$pkgname
            mkdir -p $startdir/pkg/usr/{bin,man/man1}
            # keeps binary from building
            rm -rf vacation
       # fixing the Makefile - not only for arch64
       sed -i -e 's: -m486::; s:CFLAGS.*= (.*):CFLAGS += 1:' $startdir/src/$pkgname/Makefile
       sed -i -e "s:/usr/bin:$startdir/pkg/usr/bin:g" $startdir/src/$pkgname/Makefile
       mv vacation.man vacation.1
       make install
    These file have been created:
    Code:
    [andyrtr@workstation64 vacation]$ ls -lRA pkg/
    pkg/:
    insgesamt 0
    drwxr-xr-x  4 andyrtr users 96 2006-01-28 09:32 usr
    pkg/usr:
    insgesamt 0
    drwxr-xr-x  2 andyrtr users 96 2006-01-28 09:32 bin
    drwxr-xr-x  3 andyrtr users 72 2006-01-28 09:32 man
    pkg/usr/bin:
    insgesamt 24
    -rwxr-xr-x  1 andyrtr users 16864 2006-01-28 09:32 vacation
    -rw-------  1 andyrtr users   470 2006-01-28 09:32 vaclook
    pkg/usr/man:
    insgesamt 0
    drwxr-xr-x  2 andyrtr users 48 2006-01-28 09:32 man1
    pkg/usr/man/man1:
    insgesamt 0
    [andyrtr@workstation64 vacation]$
    I get this error:
    ==> Starting build()...
    gcc -march=x86-64 -O2 -pipe -Wall -Xlinker -warn-common -D_PATH_VACATION="/var/abs/extra/system/vacation/pkg/usr/bin/vacation" -o vacation vacation.c -lgdbm
    install -s -m 755 vacation /var/abs/extra/system/vacation/pkg/usr/bin/vacation
    install -s -m 755 vaclook /var/abs/extra/system/vacation/pkg/usr/bin/vaclook
    strip: /var/abs/extra/system/vacation/pkg/usr/bin/vaclook: File format not recognized
    install: strip fehlgeschlagen
    make: *** [install] Fehler 1
    ==> ERROR: Build Failed. Aborting...
    Looks like its tring to install to /var/abs/extra/system/vacation/pkg/usr/bin....... ????
    try make DESTDIR=$startdir/pkg/usr install

Maybe you are looking for