How do I preview my video in Motion?

I'd like to see it without all the distractions

You can type command-/ (forward slash) to toggle any onscreen indicators like bounding boxes around selected items, paths, etc. To toggle 3D overlays, you can type command-option-/ (forward slash), and if you look at the View menu at the top right corner of the canvas, you'll see many of the particular items can be toggled on and off separately (example: Guides can be toggled with command-; [semi-colon] and safe-zones with just the single quote key, etc.)

Similar Messages

How do you preview the video effects?

Hi,
I am just wondering how to preview the video effects in Premiere Pro without having to add them to the timeline to view them. Anyone have any idea?
Thanks in advance.
Kerri

Kerri,
Much of where a Transition is positioned will depend on your Clips, themselves. Here's another topic for your "Autumn Reading List" - Handles.
The understanding of these will go a very long way to understanding the placement and operation of Transitions.
Here's a short bit on Handles, but the manual (if they still have those) and the Help files will give you a lot more info.
Initially, Handles are a bit of an abstract concept, but once you get it, you'll fully understand some of the behavior of Transitions. Well worth reading.
Good luck,
Hunt

How can i export uncompressed video from motion 5?

how can i export uncompressed video-material from motion 5?

Export with Current Settings if you are already working uncompressed. Otherwise, Send to Compressor, and choose the codec you want there.

How Do You Preview Your Videos On THe 3G S? do you have to go to camera?

to get to the videos recorded via the phone's camera, do you need to go to camera then switch it to videos then click on the thumb nail??
another way?

Videos taken with the Camera app are stashed in the Camera Roll album in the Photos app. So you can also view them by going into Photos and looking in Camera Roll. The thumbnail for each video is marked on the bottom with a little movie camera icon and the length of the video -- both of which distinguish videos from photos that might also still be in your Camera Roll (i.e., not yet transferred to your computer and deleted).
--Bob

How can I flip my iphone videos on my PC? My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion

My videos from my iphone are horrible when I transfer them to my PC. How can I improve the video on my PC? Can I just convert the files to WMV? When the video plays the speed is off, it's half slow-motion and staggers into normal play. The clips are slightly cut as well, the clips do not roll continuously. I'm taling about videos that are no more than 2 minutes long. I'm frustrated and I could really use some advice-my kids basketball games is what I'm recording and I'm trying to send them to my family (they are not very tech savvy). Thanks

Not it's only function but one for which it was most admirably suited, which is why I really hope someone can find a work around. I am hoping my post to the Apple feedback may prompt a useful response from Apple and I live in hope that my post here will elicit a useful response from another user. I did not miss the the text at the top of the feedback form but you presumably missed my initial text, 'someone here can explain' or my subsequent 'work around from another user'
Just in case anyone reading this has a large collection of music videos, video podcasts or iTunes U then DO NOT upgrade your iPad to iOS 5. If you are considering purchasing the iPad as a useful mobile device to experience these media organised in your iTunes please don't as you will be wasting your money. (unless someone on this forum knows of a way to undo the mess created by those infallible folks at Apple)
Yes I know it does other things but the purpose I bought it for doesn't work anymore

How can I preview video files in quicktime

How can I preview video files in quicktime by click on the space bar like i use to with leopard?
I like to pull up all of my video files and arrowing down and hitting the space bar and previewing them.
I cannot do that with all of my video files just some of the video files are able to be previewed.
Some of the files show a thumb of the video and some just show the quicktime logo are other logos
I am running the latest Lion
Thanks.

You need to investigate BLOB = Binary Large Objects.
Start with Google where you will find plenty of info to start with.
Next time, you'd better mentioned the OS and Oracle version (4 digits) that you are using.
HTH,
Thierry
Isn't it what you already asked?
Storage of AVI files in Database

How do i play a video that is in my iphotos in slow motion? please advise

How can I play a video that is in my iphotos in slow-motion

Export them from iPhoto and use a player that supports Slo-Mo.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
In this article, I will show you guys how to convert videos on windows and mac.
Part 1. How to Convert and Edit Videos on Windows
For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
Step 1: Download and install Aiseesoft Total Video Converter
After you download it to your computer, double click it and it is really easy to install.
You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
Step 2: Load Video
Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
Step 3: Select the target to decode
In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
Step 4: Set Advanced Parameters
After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
Step 5: Choose a Destination
To browse and find a output folder for your output files or just the default one.
Finally, Click “Convert” button to begin your conversion, here in the converting
interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
Tips: How to Edit the Output Video
This video converter is also a video editor, you can use it to edit your output video as follows:
http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
1. Effect:
You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
2. Trim:
In “Trim” section you can pick up any part of the video to convert.
There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
3. Crop:
This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
4. Watermark
In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
Part 2. How to Convert Video on Mac
This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
Step 1: Add File
Click “Add File” button to load the video you want to converter
http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
Step 2: Choose profile and adjust settings
You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

@ Tamwini
Your only goal is to sell software.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How do I save a video permanently ?

Now that I know how to save a photo permanently : In the continuous series of saving things (save money, save energy, save water, save gasoline--neh...more important :
How do I save a video (from YouTube for example ) and keeping full motion ?
I downloaded Jing (www.jingproject.com)
and it works but there's a problem (see below the email conversation I had with them)
Does anyone know another device ? there are a few but not for Mac.
-----------email exchange with technical support--------
When I play a video that I recorded from YouTube, the image is jerky. The original is fine when I just watch it, but the recorded version shows an still image for 10 seconds then go to the next image. It doesn't show what's in between.
I can see the time (elapsed/remain) on the YouTube screen and It goes from elapsed time: 10 seconds, immediately to elapsed time: 20 seconds. Again the original is fine. It has zoom scenes and the Jing version just show the image from far then from close but not the actual movement of zooming in.
Thank you for contacting Techsmith with your concerns.
Jing is a simple tool created for screen recording. It typically does not handle full-motion video very well, and videos captured from the web, such as youTube videos, will most likely become considerably large compared to screen videos, and will potentially drop frames, especially if you are on a PPC G4 or G5.
Please let me know if you have any further questions.
Regards,
Casey
Techsmith Support
---------

This works with Firefox.
https://addons.mozilla.org/en-US/firefox/addon/3006
VLC can play downloaded Youtube video, and many other formats.
http://www.videolan.org/vlc/download-macosx.html

HT2493 How to change preview image of a file and NOT the icon ?

Hello dear Mac users
How to change preview image of a file and NOT the icon ?
I know how to change the icon of a file, but I wish to know how to change the preview of any file.
For example: my file is "mysong.aif", I changed the icon to be "mylogo.png" using cmd+i, cmd+v on the icon. But the preview of the file still remain the same.
I know it can be changed using iTunes, but I don't want to import all my files in iTune, and iTune cannot import all type of files.
I hope someone will understand my needs...
Thanks!

Thanks BeerbarX
You can't change the preview image for anything
hoo
QuickLook plugin
what are the plugin ?
In the case of a music file, it will be that generic black box with a note on it
That is exactly what I'm asking about !
MP3 which has a special tagging standard that can include artwork
How can I "tag" my MP3 without going thru iTunes ? Is it possible to do it dirrectly in the Finder ? Is there other type of files that can include such tags ?
Thank you for answering my question , wich I have to admit may seem useless, but I wish I could put something like a signature logo on each of the different file I produce (as AIF for music and MP4 for video clip) instead of that generic black box with a note on it, and by the meantime keeping a different icon for all of them in order to illustrate theire content.

How to create a multi video player with iMovie

Hey folks, I have a great wee QT player for my daughter's website which was generated for me by iMovie export. Lovely.
But- folk are wanting to see more videos of her singing.
Question- how to generate a multi-video player using the same principles (and same simple design)? One like those generated by YouTube's facility to create a list of videos to appear in a single player, or where it is possible to just click a "next" tab? Here is the page I am referring to: http://www.brigidmhairi.com/music.html
Just to clarify- I am not wanting to use the YouTube player because it is a bit fussy and doesn't look right on the site in mind. The QT one has no borders etc and therefore suits me better. Besides- the 320 format is perfect.
Hope someone can help me, thank you SO much.

MacBraveheart wrote:
.. how to generate a multi-video player using the same principles (and same simple design)? .. Here is the page I am referring to: http://www.brigidmhairi.com/music.html..
Hope someone can help me, ..
Hi HighlanderIn ..
who else than me.. ?
this is no iMovie related question.. that is
a) html/CSS-coding or
b) some flash-app
read out the code on your linked website ... :
<embed type="application/x-shockwave-flash" src="http://cache.reverbnation.com/widgets/swf/33/videogallerywidget.swf
pageobject_id=artistxxx bla bla bla /><br/>
<a href="http://www.reverbnation.com/main/artist_feature/widgets">
bla bla bla ..
</noscript>
.. going to that website reverbnation.com, it looks like they offer, as YT, a video-hosting service plus that 'special' player as a flash-code you can embed in your website (as the YTplayer) ..
so, here are your options:
• use this service.. costs? no idea, research on your own ..
• use flash, encode yourself.. perhaps, you can find some 'ready made' coding?
• *what website-maker do you use?* iWeb offers a template for videos.. many on one preview-page, 'click' creates a bigger version for playback ..
.. as mentioned: less iMovie, more 'website creation' ..

How can I shorten the video rendering time in PS CC2014?

9 minute video just took 22 hours to render - 2.5 hours per video minute! 2 camera operation, all clips as Smart Objects and separated into 2 video groups, Camera Raw Filter edit for color control and sharpening, several clips have Transform cropping, audio within 1 video, no keyframes, output converted from 1080p to 720p so lots of stuff going on. 2-year old pc, 16GB RAM, 10GB RAM allocated to PS, 8GB RAM in use; 4-core i7 processor at 35% utilization, no network activity. 3 minute videos took only 1 hour per video minute. Premier not an option. Increasing RAM allocation is one guess. Thanks.

If you delete the two Camera RAW Smart filter adjustment layers. How long does it take to render the video. I don't know if Camera RAW color correction is going to be beneficial for video NTSC, Pal etc. Video encoding and compression only has full frames sever so often in a video stream most frames are just differences so I don't know how effective sharpen is for Video. Perhaps Smart object and smart filters are just increasing processing time and not adding great value. Considering Digital Video Camera can encode video in real time. Also the video you get from a Digital Camera is Process video may be encoded with Motion Jpeg or some other some other video encoding. How well can it be sharpened and color corrected. Transforming and Cropping does not need to be done using Camera RAW as a smart Filter.

How do I preview .eps or .ai files in Bridge CC?

How do I preview .eps or .ai files in Bridge CC? I only see the icon thumbnail and the file name but not a preview pic of what is in the file.
Thanks!

Sounds like normal, expected behavior, but…
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

AE CS6: How to Ram preview or playback in smooth real-time everytime?

Hi guys,
I would like to know how to Ram preview or playback in smooth real-time everytime? I'm using a videohive template and adding in my footages to the media holder comps. The AE template is complex I guess.
Hee's the problem, everytime I make a change to text, add a footage replacement or make any change at all, I have to completely render and wait a long time to see my final product in "Real-time"/smooth. Is there someway that I can render out the whole thing once and even though I make a change the entire video will play smoothly without rendering time?
PC Specs:
HP 510t
Windows 8 Pro x64 bit
16GB Ram
i7 2600 CPU @3.4 GHz
GTX 660Ti

Proxies don't affect rendering beyond the point of reducing the resolution and thus the nuimer of pixels that need to be processed, but since the retain the effect properties at full resolution, e.g. a large blur still renders just as slow. They are more a means of reducing file I/O bandwidth while working really.... As I said, the best way to optimize this would probably be to restructure the project so parts that don't change reside in separate pre-compositions and can use the disk cache.
Mylenium

How do I place a video into Muse?

I have converted a .mov file to .swf file. When I place it into Muse I get the box with the Flash f in top left coner, but when
I preview the page there is no video.
I have a swf file directly from flash that is animated with audio and it shows. What is the diference in the files and how do I get the video to run?

It's strange it's not working, but it was a long time ago I imported a Flash animation into Muse. However i strongly recommend if it's not too much trouble to try and rework it into Adobe Edge Animate as this creates an .oam version (animated directly into HTML 5 compliant code) and works perfectly across all browsers.
Failing that try the following link to the W3C schools website as you might be able to link their HTML code to your video.
(http://www.w3schools.com/tags/ref_av_dom.asp)
And lastly, if all that fails and it's for example an animation portfolio; upload it to YouTube and copy the HTML embed code and that always works really well.
Tom

How do I preview my video in Motion?

Similar Messages

Maybe you are looking for