How do i print a an online coupon, such as the one from Staples ?

We don't know how to print  from the internet . Please help !

Sometimes when problems pop up for no apparent reason it could be that the preferences files had become corrupted. Here are two ways to reset the preferences.
1. The reset process might be built into your PSE version, as shown in this video:
How to Reset Photoshop Elements Preferences - YouTube
2. If your version does not have the reset option,  press and hold Alt-Ctrl-Shift (Option-Command-Shift on Mac) immediately while starting PSE. The timing is critical; you may have to try this several times. A dialog box will pop asking if you want to delete the settings file?  Click  YES.
Let us know if either of these works for you.

Similar Messages

  • How to change IP addresses of APs and WLC to the ones from different VLAN

    I'm trying to figure out what is the best practice to change IP addresses on all my access points connected/managed by the WLC.
    I have one WLC2504 controler and three AIR-LAP1041N access points the idea is to change management IP of the WLC from 192.168.2.100 (vlan1) to 192.168.12.100 (vlan79) and all access points accordingly:
    ap1 192.168.2.101 (vlan1) to 192.168.12.101 (vlan79)
    ap2 192.168.2.102 (vlan1) to 192.168.12.102 (vlan79)
    ap3 192.168.2.103 (vlan1) to 192.168.12.103 (vlan79)
    FYI all my APs obtain IP from DHCP server which sits in the vlan1 and each AP is connected to trunk port on Catalyst switch, trunk port (vlan1, vlan79, vlan80, vlan81, vlan82) carries traffic for different WLANs, so my question is what is the best way to change management IP on each device with the minimal downtime.
    Thank you for your advice,
    Luu Manioro

    Well, you will have downtime anyways, but how I would do this is the following:
    Make sure the WLC trunk port has vlan 79 being allowed
    Change the high availability on each AP to point to the hostname of the WLC and the new ip address, you don't need the old ip address anymore
    Console into the WLC or use the service port and change the management ip address and at the same time if possible, move the AP's to the new vlan 79, since they have already joined the WLC, they will know of the ip address of the WLC
    Reboot the AP by shutting down the PoE port or powering off/on the AP
    The AP will find the WLC since you have defined the high availability and also since the AP and WLC are on the same subnet.
    Scott

  • How can i print a network configuration page , i need the IP on a ph1510

    how can i print a network configuration page , i need the IP on a ph1510

    Hi,
    What is the exact printer model?
    If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I have windows for apple power point, how can i print a 6 slide handout using ALL the paper?

    I have windows for apple power point, how can i print a 6 slide handout using ALL the paper?
    The slides come out SO small and there is so much paper not used!

    Ah - OK. Ahora entiendo.  Estás en el foro incorrecto.  Aquí tratamos sólo con los productos de Apple, y tu pregunta es sobre un producto de Microsoft.
    Tendrás más suerte en el foro de PowerPoint en el sitio de Microsoft:
    http://answers.microsoft.com/en-us/mac/forum/macpowerpoint
    ¡Suerte!
    M.

  • How do I change my default "SAP Working Directory" to the one I wish ?

    Hello Gurus,
    How do I change my default "SAP Working Directory" to the one I wish ?
    At the moment default SAP Working Directory to set to the following directory.
    "C:\Documents and Settings\T51273\SapWorkDir"
    So, when ever I try to download a Report/Table Contents/Spool Request, SAP prompts me to save in the above SAP Working Directory, which is "C:\Documents and Settings\T51273\SapWorkDir". Ofcourse I can change the folder in the dialogue box, but I don't want to change the folder each and every time I download a report from SAP.
    I wish to change my default "SAP Working Directory" to "My Documents" Folder. So that from next time,
    if ever I try to download a Report/Table Contents/Spool Request, SAP should prompt "My Documents" Folder. That way I don't have to change the folder at the time of saving.
    Full Points are assigned for an answer that works...
    Thank You,
    Nag.

    Hello,
    A short question about transaction SO21:
    Is this a local setting, per GUI?
    Or does this affect all users?
    I have a problem opening an attachment (Mandates).
    SAP wants to save it to C:\Windows\System32\
    I see that is stated at SO21.
    If I change that to another (accessable) location, does that affect the opening of the attachment?
    Thanks!

  • I used an upgrade from a different phone to purchase a new iPhone.  How do I assign that phone its original number (not the one that it was upgraded from)?

    I used an upgrade from a different phone to purchase a new iPhone.  How do I assign that phone its original number (not the one that it was upgraded from)?

    Phone number of the device is assigned by the carrier.
    Ask the carrier.

  • I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had.  I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

    I have a 3G iphone. I just tried to download the new itunes and lost all my itunes I had.  I tried to transfer them from my computer but can't. How can I and what do I do to get the ones I bought before and now have lost.

    It has always been very basic to always maintain a backup copy of your computer.
    Use your backup copy to put everything back.
    If for some reason you have failed to maintain a backup ( not good), then you can transfer itunes purchases from an ipod/iphone/ipad:  File>Transfer Purchases

  • Hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    hey how are you guys listen i have an iphone 4s the one i use with the H20 CARRIEr and i trying to enable the option call forwarding and when i type tho number i go back and i notice to the call forwarding it turning off as soon i back to the main menu ?

    There are a lot of posts in the forums today with people having problems with iMessage.   There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
    I would just wait it out - I'm sure it will be sorted out soon.

  • Hi - have lost my Install DVD for my macbook Pro - can I use the one from my husbands Macbook or how do I get a new one??

    Hi
    Have lost my Install DVD for macbook pro and need it because my computer black out all the time - can I use the one from my husbands macbook (not pro) or how do I get a new one???

    10.6 Snow Leopard ?
    You can call Apple and order one.  1-800-275-2273
    You cannot use an install dvd that is shipped with another computer.

  • How can I view information about an image, such as the file name and exposure,  on the Ipad?

    how can I view information about an image, such as the file name and exposure,  on the Ipad?

    You can't with the built-in Photos app, but there are apps such as iPhoto which allow you to see the exposure details (aperture, shutter speed, focal length, ISO). PhotoMeta also shows you that info

  • I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

    Try restoring from the backup created at the beginning of the sync process:
    Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
    Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
    Select Restore from backup, choosing your most recent backup to restore from
    Disconnect your phone and confirm that your photos are back
    Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

  • How do you import audio books so they are like the ones you buy from itunes

    how do you import audio books so they are like the ones you buy from itunes?

    There are a number of tools for merging the files into one. Personally I don't bother, but you'll find links on my page which describes how to manage Audiobooks on iPods.
    tt2

  • I have an inetrnet modem and the time capsul one, I need to shutdown the internet modem signal so I only get the one from Time capsul. Does anyone knows how to do that?

    How do I turn off a modem signal so I only get the one from the time capsul?

    What is the make & model of your modem?

  • How can I synchronize my ical on my laptop to the one on my home computer?

    How can I synchronize my ical on my laptop to the one on my home computer?
    Can anyone help?

    You can synchronize iCal calendars from one Macintosh to another by…
    • using .Mac Sync to synchronize event and task data
    • using Sync Together to do so, or
    • creating Google Calendars and synchronizing them using SpanningSync

  • I wants to know if i purchase sony mobile through online i will get the service from sony service ce

    i wants to know if i purchase sony mobile through online i will get the service from sony service centre or not???

    HI arshak,
    Greetings! At your convenience, please reach out to our colleagues at Sony Mobile for further assistance with your question. You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/  Thanks for your message today!

Maybe you are looking for

  • Flash chart formatting

    Hi everyone, Can someone explain or point me in the direction of some documentation that can explain how to format the apex flash charts? I'd really like to be able to edit the colours on the chart beyond the inbuilt 'Look1; Look2' etc thanks heaps!

  • Can Vbscript measure File transfer for mutliple files?

    Hi, Can VBscript able to measure timing for multiple files transfer using WinActivate or other option? Example: copy C:\Single 3GB file to D:\ copy C:\Single 5GB file to D:\

  • Problems with Macbook Pro shutting down

    My macbook pro won't shut down completely.  It stops at the blue screen-when left to continue shutting down, it drains the battery.  I have to power down by holding the power button during this process.  Any suggestions?

  • Re: Running weblogic multiple instances on different ports

    Hi, I am planning to run multiple weblogic instances on different ports on the same machine. Is it possible ? If so, how ? Details: I am using IIS on the same machine. I am currently running weblogic on 7001 and 7002(ssl). I dont how to run multiple

  • Losing internet connection with youtube in safari

    I keep losing Network connection after  i use YouTube in safari. Need to restart iPad to get connection again. Anyone an solution? I Re installed already 2 times but without any luck.