How do I print a label in pages?

Once I have typed a letter and I wish to print a label for an envelope I can not find a process or icon.  How do I print a label from inside a document in pages?

You don't. You can copy & paste the name & address into an envelope template or use the very handy widget EasyEnvelopes.

Similar Messages

  • How do I print address labels using Pages 09 on MacBook Pro?

    I need to do a full page of Avery J8163 labels with the same address printed on each label on the sheet and can't work out on Pages 09 how to do it.
    Can some kind person please tell me how to do it.  Please be gentle with me as I am new to the ways of Mac having always used a PC before.
    Thank you

    I would try asking the users in the Pages forum.  Good luck.

  • How can I print address labels from numbers spread sheet

    How can I print address labels from numbers spread sheet

    CAB,
    The 5163 template has the following dimensional specs:
    Dimensions & Info
    Length: 4.00000"          Height: 2.00000"
    Top Margin: 0.50000"          Bottom Margin: 0.50000"
    Left Margin: 0.18000"          Right Margin: 0.18000"
    Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
    Intended Use: Mailing Labels, Shipping Labels, Address Labels
    There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
    You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
    I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
    So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
    Jerry

  • Label Printing Using Address Book - How can I Print multiple labels of the same name?

    Label Printing Using Address Book - How can I Print multiple labels of the same name?

    I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
    It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
    After printing, trash the added versions.

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • How can I print directly out of Pages on my iPad?

    How can I print directly out of Pages on my iPad if my Brother printer is not airprint compatible? I currently have a Brother MFC-J615W and have downloaded the Brother iPrint app; but that only works with pictures and PDFs it seems.  I know I can use the cloud to transfer and just print from my macbook, but I am starting school and would love to cut out that middle step if possible.  I know... how lazy is that? But I feel like I should be able to make it work with a little ingenuity.  Thanks for any info you can provide.

    Try to arrange them manually afterwards: afaik, it is impossible to force an order when syncing:
    See MartyLightroom's post:
    Re: How do you arrange the albums in chronological order in iPhoto ? 

  • How can i print a network configuration page , i need the IP on a ph1510

    how can i print a network configuration page , i need the IP on a ph1510

    Hi,
    What is the exact printer model?
    If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    How can I print multiple photos per page?  It was simple in earlier versions of iPhoto.

    Do you want to print several different photos per page or multiples of the same photo?
    If you want to print several different photos,select them all at once and press command-P for "Print".  Pick the Custom Layout and adjust the photo size suitably.
    If you want multiples of the same photo, duplicate the photo several times and select all copies at once, then press command-P.

  • How can I print a label on the last page of the report in the margin

    I would like to display a label on my report but has to appear only on the last page of the report in the margin area or as a footer. I have tried using the solution below that I came across in this forum. This solution only worked if I put the label as a report trailer and not in the margin of the main section of report. The problem of putting the label as a report trailer is that it will only appear at the end of the report on it's own page, i.e. on a new page. I would like the label to appear at the end of the report, on the last page which has the other report details and not to appear on a new page on its own. Could you please help? Thanks.
    1. Create a dummy query, like
    select 1 dummy
    from dual
    2. Create a package spec:
    PACKAGE pkg_globals IS
    totalPages number(3);
    END;
    2. Create a repeating frame and field for this dummy at the end of the report layout.
    3. Create a format trigger for this frame:
    function R_1FormatTrigger return boolean is
    begin
    SRW.GET_PAGE_NUM(pkg_globals.totalPages);
    return (FALSE);
    end;
    4. Create a format trigger for your margin field:
    function F_1FormatTrigger return boolean is
    pagenum number;
    begin
    srw.get_page_num(pagenum);
    if pagenum = pkg_globals.totalPages then
    return (TRUE);
    else
    return (false);
    end if;
    end;

    user8655468 wrote:
    I would like to display a label on my report but has to appear only on the last page of the report in the margin areaCreate a fixed frame at the bottom of margin area and inside the frame put your label.
    set the frame print object on: Last page
    Hope this works..

  • HT2486 how can i print address labels for my Xmas cards from my address book?

    Hi- I spent last night entering all my names and addresses of friends and family into my address book on my Macbook Pro.  But I just can't figure out the next steps.... what labels should I purchase to print and then how to export the batch onto those labels.  What am I missing?  Thanks for your feedback!!

    Hi!
    @edcampbell
    Welcome the HP Support forums.  I understand that you are having a problem getting your labels lined up.
    To better assist you, would you please provide some further information:
    What make/model/product number of HP printer do you have?
    How is the printer connected (USB cable, ethernet, or wireless)?
    What is operating system are you using (Windows 7, or Mac 10.8, etc)?
    What is the size of the labels that you are printing and is it a page of labels?
    Thank you.
    Guide to  finding your product number
    http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=ca&lang=en
    @jom42452
    Thank you for joining the HP Support community.  I understand that you are unable to line the labels for your Photosmart printer.
    To better aid you, would you please supply some further information:
    What model of Photosmart printer do you have?
    How is the printer connected (USB cable, ethernet, or wireless)?
    What is operating system are you using (Windows 7, or Mac 10.8, etc)?
    What is the size of the labels that you are printing and is it a page of labels?
    Thank you.
    How Do I Find My Model Number?
    http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bpy21016
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • How do I print Avery labels?  I can do the address only using address book, but I need to add several lines of additional information.

    How do I print Avery mailing labels?  I can do them using my address book, but I need to have several lines of additional info. on the label.  Thanks.

    You chose a group of addresses you want to print and then use command-P. You will get a drop down menu where you have to select the Avery number or size of labels. It's pretty rigid.
    I can't stand the limitations of the Contacts method of printing address labels. I don't want to waste a partial sheet if my selection doesn't come out even with the number of labels. I'd like to duplicate addresses which I use often to fill up the partial sheet. I like being creative with fonts, colors and even borders or images. Your ability to be creative with Contacts printing is severely limited.
    I've used Pay&Play's Label Printer Pro software for years. I originally paid MUCH more for this program. It's extremely versitle. Design one label and you can copy it to the rest of the labels in the drop down menu with one click. Chose how many of whichever lablel you want to duplicate with a simple cut and paste to fill up the page.
    I can vouch that it works perfectly with Mountain Lion, v 10.8.2.
    Here's the link to their direct download from their website for $6.95:
    http://www.payplaysoftware.com/download.html
    Or you can look up Label Printer Pro 7 on the app store and pay $9.99.
    No, I don't work for or have any ties to the company other than being a satisfied customer of a product which suits my needs perfectly.

  • How do I print from a Help page?

    Hi all.
    A newbie here.
    Quite regularly I find the need to use the help function on my OS 10.5.5 Mac and at times the help information is of considerable length, too long to write out long hand.
    My question, how can I get the printer to print from an open help page?
    I have clicked on all the tabs at the top of the page but no joy.
    In Windows I can just click Control and P at the same time and I get a print, but this does not appear to work with the Mac system, so how do I print?

    Thanks guys.
    The "Gear" method appears to be the simplest.
    I could have sworn that I checked EVERY tab and menu looking for a print option. I am damned if I know how I missed that one.
    It's a good thing I have you guys to help me out.
    Thanks to all.
    Regards

  • How do I print an envelope in Pages?

    How do I print out an envelope using Pages?

    Select an envelope template and paste in your address text.
    Peter

  • How can I print more than one page of an internet site?

    When I try to print pages from internet sites (Facebook, Merchant Circle, Linked In, NBC.com, etc.), Firefox will only print the first page.
    In order to print more information, it is necessary to reduce the scale of the print so more of the information will print on the first page.
    How can I print out more than just one page of a website without having to make the print so small that I cannot read it when it prints?

    Firefox has problems with some style rules.
    First, it's always helpful to use any print-formatted or print-optimized version of the page. Sometimes there is a link for this.
    Second, in some cases you need to use this trick: press Ctrl+a to select all content on the page, then Ctrl+p to display the print dialog, and click the radio button next to Selection.
    Those tricks don't always work, but hopefully they will help.

  • How do I print only the first page of multiple PDF documents?

    I have about 1,500 PDF files (scientific papers) that I need to print only the first page of... Any suggestions on how to do this as a single job or as a few jobs? The files are organized in a bunch of different folders, so if there was some way to do this folder by folder, that would be ok too. Thanks!

    Make sure that in System Preferences Printing & Fax pane you set the default printer to the one you want to use, then put all of these PDF files into their own folder, then open terminal and type the following (without hitting return afterward):
    lpr -o page-ranges="1-1"
    Then drag one of the PDF files into the terminal window (it will add it's path to the end of your command) and replace the file name with *.pdf, so it will look like this:
    lpr -o page-ranges="1-1" /Users/todd/Documents/My\ Folder/*.pdf
    Then hit return.

Maybe you are looking for

  • Monthly snapshot for Open / Cleared Cube

    Can the standard Delta extractor 0FI_AR_4 be leveraged to get a monthly snapshot of Open and Closed items? Open - All and Closed only for the past year. Currently I am thinking of feeding a delta upto a standard DSO at the Account number, line item l

  • Errors for PACKAGE BODY WWV_FLOW_CUSTOM_AUTH_SSO

    Hi All, Running the below package so I can configure SSO...running into the below error. Any help is appreciated SQL> @custom_auth_sso_902.plb; ...wwv_flow_custom_auth_sso Warning: Package Body created with compilation errors. Errors for PACKAGE BODY

  • 16:9 - exporting to QuickTime

    I am working on a FCE HD 3.5 project in 16:9 but, when I export it to QuickTime, it comes out as 4:3. I expect I'm making a very basic mistake here but I can't work out what it is ...

  • Dll for NI 6008 in teststand

    Hi, since 2 days I have been struggling to find a dll or lib which I can use without any problems for controlling NI USB 6008 card. I am not sure if it is possible to control usb from teststand. All I could find was: - NIDAQmx.lib file. Which when I

  • Deploytool won't talk to server

    My J2EE server seems to start ok, and I get the web page telling me that it's ok on localhost:8000, but deploytool won't connect to it. It generally hangs, but sometimes it tells me that it can't connect to loaclhost. J2SDK java version "1.3.1_06" Ja