How do I print anything after problems re-installing cs4

I deactivated my copy, including license, then uninstalled program. I get this message following uninstall:
"problems occurred while components were being removed".
Then I restarted computer, and re-installed program. I get this message following install:
"Some optional components may not function but program is useable" (or some similar wording).
The obvious component that doesn't work is the ability to print, either PDF or regular printer. I'm at my wits end trying to resolve this and have done the above several times.
fsakor

Peter:
Guess I'm slow at understanding directions, but I finally got it figured
out. The Adobe Creative tool said it was successful, and I re-installed
InDesign with no problem messages following. BUT it still won't allow me to
print anything.
fsakor

Similar Messages

Unable to print anything after upgrading to Leopard, Ilife 08 and iwork 08

After installing these upgrades I am unable to print anything even test pages. Anyone got any ideas?I have tried deleting the printer and reinstalling checking for new drivers etc.

What printer are you using? What happens when you try to print? Does this happen with all applications?

Problem RE-installing CS4

I installed CS4 on my mac, no prob... A few days passed and an error occurred on my start up (I assume). Long story short, I had to reinstall CS4, after the install was complete I tried opening PS and it came up with a menu that stated something along the lines of "the serial numbers you have used are expired or have been installed on this comp prior) then it asks if you have different serial # (which I don't). I'm thinking I need to find the original install files, if thats the case, where would I find the imbedded install files (more so then a simple CS4 uninstall)???

only customer service can help you with serial number stuff

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

My mbpro would not start so re-installed (as instructed by the website) how do i recover files after i re-installed my OS? thank you.

my 13" mbpro would not start so i followed the instructions & turned out i needed to reinstall the OS. can i still recover my files after i erased & reinstalled? if yes, how do i do it? thanks.

If the system partition was erased, recovery of any files previously stored on it as identifiable entities is unlikely.
Keeping an external CarbonCopyClone of the startup disk (free download) gets you a bootable clone (with all applications installed) so you have a chance of cloning back onto the internal disk if you ever need to reformat the partition again.

Problems after wrong lnguague install CS4 with Acrobat Pro

I helped my friend with her new CS4 install.
So CS4, Apple intel iMac (1 year old only).
She got a Dutch education license.
First, without thinking, I installed the whole thing in English. The serial did not work, and I realized I needed to reinstall, but then in Dutch.
All programs work in Dutch but Arobat Pro 9 and Distiller stopped working.
After uninstalling and removing Acrobat Pro 9 it does not want to install probarly anymore. Basically the installer completes succesfully, but the acrobat folder is only 300mb or so, and does not start (icon of acrobat appears as 'not an application' by os x).
How can I succesfully reinstall the Dutch (she has a Dutch license!) version of Acrobat 9 Pro.
- Straight from the dvd does not work.
- Download of Acrobat 9 Pro ofr Mac is not available (also not trial).
- Update does not solve the issue.
Thanks for your help!
Bart

[shamless bump..]
Nobody can help us on this?

How can I add users after archive and install

Hi Gang,
I had a crash on Sunday and had to do an archive and install to get this computer back up and running.
It's a PowerBook G4 and I am running 10.4.
I reinstalled from my OS X 10.4 disc. After the install, the Login screen had none of my families user names. I had to go back to the disc and create a new password for a System Administrator.
I did a software update to OS X 10.11.
I am in now and can see the "Users" folder with everyone in it, but I can't figure out how to move it back into the system.
Please help.
Thanks,
Tom

Hi Gang,
If you go to "Users" in System Preferences, and add the user with the same name, it found the user and asked me if I wanted to import the data.
It worked beautifully.
Thanks,
Tom

How to change metadata database after OIM/OAM install?

Hi everyone
We need to change the metadata/schema database for our OIM/OAM installation.
What I plan to do is:
1. Create the new db
2. Run the RCU utility for both OID and OAM.
3. Change the connection pool data source in the OAM Weblogic console.
Is there anything else I need to do?
I know there was a connection to the database done when I created the Domain from the OID home (using config.sh). I've tried to run this config script again but can't find any way to amend the domain, nor can I see how to do it in any of the (many) consoles.
Any help greatly appreciates!
D

Hi ,
At the time of configuration you will get an option to set the database connection parameters there you can point to your required DB schema.
Regards,
Ari

How to get Print and Scan Doctor to install in English

The HP Print and Scan Doctor Utility automatically installs in the local language of the region and keyboard my pc is set for. How can I get it to install in English?

Hi John1000000,
Welcome to the HP Forums. I see you are want to change the language in your Print and Scan Doctor. Here is the link to the Print and Scan Doctor, scroll down to the bottom of the page and there will be a spot right above About HP that will have your country. Click on the country and make sure that it reads United States. Then install it and let me know if you are getting English or if it is going to the regional language.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How to enter time machine after a fresh install??

Hi I just reinstalled my system after I got many errors and many clutter on my hard drive. I made a full TM backup before formatting the hard drive.
Now I am in the new fresh system and my time machine hard drive is displayed but just as an external hard drive (displayed in yellow instead of green) and I can not enter the time machine.
What did I do wrong? I don't want to restore everything the way it was before but just certain settings and items. So basically I want to use the timemachine interface and select the items I want to restore instead of using the migration assistant where I have to restore full categories.....
How can I do this????
Oh by the way, I am using OSX Mavericks.

You have to enable Time Machine in System Preferences > Time Machine. Also, now Time Machine detects your Mac OS X copy as one installed on a new Mac, so it won't allow you to restore files from the backups through your Time Machine interface.
To restore your files manually with Time Machine, see > http://pondini.org/TM/E3.html

Can't install anything after new Pacman install.

I'm installing Arch on a computer at work. I used the install cd. Booted up fine. Ran a
pacman -Syu
updated pacman, ran pacman -Sc then updated the mirrorlist file as I like for the servers. Then ran
pacman -Syu
again to update the packages.
Now if I try a
pacman -S xorg
it will download everything but a few files. Why? I can't get it to install gnome either (downloads everything but 3 or 4 files). Says bad md5sum and doesn't even begin to download the package. Then it asks if I want to delete the package.
Also I'm trying to install firefox3 so I ran
pacman -Sy firefox3
and I get
"error: 'firefox3': not found in sync db"
I downloaded the tar.bz2, unzipped it into ~/abs/local/firefox then tried to go into the directory and run
./configure
but gives me an unrecognized command.
Also if I run pacman -Syu on my laptop, same thing, downloads all files except a few. It never fully completes.
Any help solving my problem would be great! I have internet connectivity at both places.
/etc/pacman.d/mirrorlist
# Arch Linux repository mirrorlist
# United States
#Server = ftp://ftp.archlinux.org/$repo/os/i686
#Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/i686
Server = ftp://mirrors.unixheads.org/archlinux/$repo/os/i686
Server = ftp://ftp-linux.cc.gatech.edu/pub/linux/distributions/archlinux/$repo/os/i686
#Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/i686
Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/i686
Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/i686
Server = http://holmes.umflint.edu/archlinux/$repo/os/i686
Server = http://mirror.neotuli.net/arch/$repo/os/i686
# South America
# - Brazil
Server = http://archlinux.c3sl.ufpr.br/$repo/os/i686
Server = ftp://archlinux.c3sl.ufpr.br/archlinux/$repo/os/i686
Server = ftp://ftp.las.ic.unicamp.br/pub/archlinux/$repo/os/i686
# Europe
# - Austria
Server = ftp://gd.tuwien.ac.at/opsys/linux/archlinux/$repo/os/i686
# - Belgium
Server = ftp://ftp.belnet.be/mirror/archlinux.org/$repo/os/i686
# - Czech Republic
Server = ftp://ftp.sh.cvut.cz/MIRRORS/arch/$repo/os/i686
# - Estonia
Server = ftp://ftp.estpak.ee/pub/archlinux/$repo/os/i686
# - France
Server = ftp://mir1.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://mir2.archlinuxfr.org/archlinux/$repo/os/i686
Server = ftp://distrib-coffee.ipsl.jussieu.fr/pub/linux/archlinux/$repo/os/i686
Server = http://mir.archlinux.fr/$repo/os/i686
Server = ftp://ftp.free.fr/mirrors/ftp.archlinux.org/$repo/os/i686
# - Germany
Server = ftp://ftp.hosteurope.de/mirror/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.uni-bayreuth.de/pub/linux/archlinux/$repo/os/i686
Server = ftp://ftp.archlinuxppc.org/i686/$repo/os/i686
Server = ftp://ftp.tu-chemnitz.de/pub/linux/archlinux/$repo/os/i686
Server = http://ftp.uni-kl.de/pub/linux/archlinux/$repo/os/i686
# - Great Britain
Server = http://www.mirrorservice.org/sites/ftp.archlinux.org/$repo/os/i686
# - Greece
Server = ftp://ftp.ntua.gr/pub/linux/archlinux/$repo/os/i686
# - Hungary
Server = ftp://ftp.mfa.kfki.hu/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Ireland
Server = ftp://ftp.heanet.ie/mirrors/ftp.archlinux.org/$repo/os/i686
# - Italy
Server = ftp://mi.mirror.garr.it/mirrors/archlinux/$repo/os/i686
# - Netherlands
Server = ftp://ftp.nluug.nl/pub/metalab/distributions/archlinux/$repo/os/i686
Server = ftp://ftp.surfnet.nl/pub/os/Linux/distr/archlinux/$repo/os/i686
# - Poland
Server = ftp://mirror.icis.pcz.pl/archlinux/$repo/os/i686
Server = http://piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
Server = ftp://ftp.piotrkosoft.net/pub/mirrors/ftp.archlinux.org/$repo/os/i686
# - Portugal
Server = ftp://cesium.di.uminho.pt/pub/archlinux/$repo/os/i686
# - Romania
Server = ftp://ftp.iasi.roedu.net/mirrors/archlinux.org/$repo/os/i686
# - Russia
Server = ftp://mirror.yandex.ru/archlinux/$repo/os/i686
Server = http://archlinux.freeside.ru/$repo/os/i686
# - Sweden
Server = ftp://ftp.ds.hj.se/pub/os/linux/archlinux/$repo/os/i686
Server = ftp://ftp.gigabit.nu/$repo/os/i686
# - Switzerland
Server = ftp://archlinux.puzzle.ch/$repo/os/i686
# - Turkey
Server = http://server.elsistech.com/archlinux/$repo/os/i686
# - Ukraine
Server = ftp://hell.org.ua/archlinux/$repo/os/i686
# NOTE: ftp.linux.kiev.ua only has the i686 arch and not x86_64
Server = ftp://ftp.linux.kiev.ua/pub/Linux/ArchLinux/$repo/os/i686
# Asia
# - Israel
Server = http://mirror.isoc.org.il/pub/archlinux/$repo/os/i686
# Australia
Server = ftp://mirror.pacific.net.au/linux/archlinux/$repo/os/i686
Server = ftp://mirror.aarnet.edu.au/pub/archlinux/$repo/os/i686
Also, I ran pacman -Syu, it checks for package integrity all the way up to 53% every time, then
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/key/af_key.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/llc/llc.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/llc/llc2.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/mac80211/mac80211.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_amanda.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_ftp.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_h323.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_irc.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_netbios_ns.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_netlink.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_pptp.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_proto_gre.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_proto_sctp.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_proto_udplite.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_sane.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_sip.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nf_conntrack_tftp.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nfnetlink.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/net/netfilter/nfnetlink_log.ko exists in filesystem
but the list just keeps going on. It's all the modules compiled in the kernel.
Last edited by otisranson (2008-03-11 23:30:48)

Still a no go. It will download all the packages, but then checks for package integrity.
pacman -Syyu
:: Synchronizing package databases...
core 23.7K 499.4K/s 00:00:00 [#####################] 100%
extra 311.4K 1263.3K/s 00:00:00 [#####################] 100%
community 346.9K 1382.9K/s 00:00:00 [#####################] 100%
unstable 5.2K 312.8K/s 00:00:00 [#####################] 100%
:: Starting full system upgrade...
warning: iproute: forcing upgrade to version 2.6.24_rc7-1
resolving dependencies...
looking for inter-conflicts...
Targets: attr-2.4.41-1 acl-2.2.47-1 audacious-player-1.4.6-1 zlib-1.2.3-4
libpng-1.2.24-3 cairo-1.4.14-1 libcups-1.3.6-1 gtk2-2.12.7-1
ncurses-5.6-6 readline-5.2-7 libxml2-2.6.31-1
audacious-plugins-1.4.5-2 bash-3.2.033-2 bzip2-1.0.4-3
libgl-7.0.3rc1-1 librsvg-2.20.0-1 gcc-libs-4.2.3-3 mpfr-2.3.1-1
gcc-4.2.3-1 mesa-7.0.3rc1-1 compiz-core-0.6.2-5
compiz-decorator-gtk-0.6.2-6 cracklib-2.8.10-5 pam-0.99.9.0-2
shadow-4.0.18.2-2 coreutils-6.10-2 cpio-2.9-3
device-mapper-1.02.24-1 e2fsprogs-1.40.7-1 libgpg-error-1.6-1
libgcrypt-1.4.0-1.1 popt-1.10.6-3 cryptsetup-1.0.5-5 curl-7.18.0-1
dcron-3.2-3 dhcpcd-3.2.1-1 dialog-1.1_20071028-1 dmapi-2.2.8-3
dvd+rw-tools-7.1-1 ed-0.9-1 libidl2-0.8.10-1 xulrunner-1.8.1.12-1
epiphany-2.20.3-1 filesystem-2008.03-2 pcre-7.6-3 grep-2.5.3-3
sed-4.1.5-3 fakeroot-1.9.3-1 file-4.23-1 findutils-4.2.33-1
gawk-3.1.6-2 gdbm-1.8.3-5 gen-init-cpio-2.6.17-3 gettext-0.17-1
libxext-1.0.4-1 ghostscript-8.62-1 gmime-2.2.16-1 gpgme-1.1.6-1
perl-5.8.8-9 groff-1.19.2-4 gzip-1.3.12-4 hdparm-8.6-1
hwdetect-0.9-1 intltool-0.37.1-1 iproute-2.6.24_rc7-1
iputils-20070202-4 jfsutils-1.1.12-2 kbd-1.12.20070827-2
klibc-1.5-3 klibc-extras-2.3-1 klibc-udev-116-2
klibc-module-init-tools-3.2.2-1 mkinitcpio-0.5.17-2
module-init-tools-3.2.2-5 kernel26-2.6.24.3-3 less-418-1
libdjvu-3.5.20-1 libgnomecups-0.2.3-1 libgnomeprint-2.18.3-1
libgnomeprintui-2.18.2-1 libpcap-0.9.8-2 libtasn1-1.3-1
libtool-1.5.26-1 libusb-0.1.12-3 libxfont-1.3.2-1 libxmu-1.0.4-1
licenses-2.3-1 lilo-22.8-2 logrotate-3.7.5-1 lvm2-2.02.33-1
lzo2-2.02-3 mailx-8.1.1-5 man-1.6f-2 man-pages-2.78-1
mdadm-2.6.4-1 nano-2.0.7-1 ndiswrapper-utils-1.52-1
ndiswrapper-1.52-1 net-tools-1.60-13 ntfs-3g-1.2216-1
python-2.5.2-2 openoffice-base-2.3.1-2 orbit2-2.14.12-1
sysfsutils-2.1.0-4 pcmciautils-014-3 pidgin-2.4.0-1 procinfo-19-2
procps-3.2.7-4 psmisc-22.6-1 reiserfsprogs-3.6.20-3 sdparm-1.02-2
shared-mime-info-0.23-1 syslog-ng-2.0.6-1 util-linux-ng-2.13.0.1-2
sysvinit-2.86-4 t1lib-5.1.2-1 tar-1.19-2 tcp_wrappers-7.6-8
totem-plparser-2.21.91-1 tzdata-2007k-2 udev-116-3 vi-7.1.228-1
wget-1.11-1 which-2.19-2 xfsprogs-2.9.7-1 xfsdump-2.2.46-3
xorg-apps-1.0.3-3 xorg-server-1.4.0.90-6 yelp-2.20.0-3
Total Download Size: 0.00 MB
Total Installed Size: 296.54 MB
Proceed with installation? [Y/n] y
checking package integrity...
(129/129) checking for file conflicts [#####################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
kernel26: /lib/modules/2.6.24-ARCH/build exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/kernel/arch/x86/crypto/aes-i586.ko exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.alias exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.ccwmap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.dep exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.ieee1394map exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.inputmap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.isapnpmap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.ofmap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.pcimap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.seriomap exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.symbols exists in filesystem
kernel26: /lib/modules/2.6.24-ARCH/modules.usbmap exists in filesystem
Errors occurred, no packages were upgraded.
I got xorg to upgrade after this though.
Last edited by otisranson (2008-03-12 20:01:42)

Printer issues after archive and install

So I recently took my iMac into the Apple store and they did an archive and install.
Now I can't get either of my printers to work. I have a Samsung ML2010 and an Epson 1400. They both show up in Printers in the system prefs printer pane, with green lights saying they are idle.
When I go to print with the Samsung, it even goes to far as to sound like its starting up, it says printing when I click on the printer in the dock, then quickly switches to stopped.
From there when I press resume, it pops up an error message saying "Operation Could Not Be Completed. client-error-not-possible"
If I'm not mistaken pretty much the same thing happens when I try to print from the Epson as well.
What's wrong and how can I fix it?
I've tried deleting the printers from the printer prefs page and reinstalling the drivers to no avail.

Did you make a backup before your archive and install?
If not, you may be forced to clone everything at least twice*:
http://www.macmaps.com/backup.html
Erase and install.
Test the drivers on a simply erase and installed system updated to the operating system it was at before (down to the free download)*:
http://www.macmaps.com/upgradefaq.html
And restore just the data that is known to work with that operating system from your backup. The other consideration you'll see in my FAQ is if you migrated from PowerPC to Intel, you might have mixed drivers that don't work well together.
are all Intel iMacs, and are not G5s.
are sometimes G5, sometimes Intel. If the Mac can boot, go to Apple menu -> About This Mac to tell the difference. If it won't boot, put the machine on its back, and read the under side of the foot of the stand. The EMC# on the foot of the stand will tell you the difference. EMC#s of 2104, 2105, 2110, 2114, 2118, 2111, 2133, 2134 are Intel. All others are G5.
An archive and install may fail if the system you are archive and installing from is older than what is already installed.
- * Links to my page give me compensation.

Printer connection after time capsule install

After installation of Time Capsule, none of the wireless printers on the network are recognized. Can they be setup or reconnected on my computer (iMac) or is that setup on each of the printers?

You setup printers on the printer..
The usual method is to connect to the computer by its usb port.. then use the CD that came with the printer for the installation wizard and setup wireless on the printer to work in infrastructure mode with the TC.. you can also use WPS method.. WPS is very well hidden in the TC or any of the apple products.
Most printers now have WPS.. you can use pin method.
Remember most printers are SMB devices.. so keep wireless name compatible.. short, no spaces pure alphanumeric. Not apple spaces and apple apostrophe.

How to restore my itunes after clean Leopard install

Hi!
I made a complete backup of my MAC hard drive before doing a completely clean install of leopard.
can someone tell me what I need to do (and where to go) to get the data off the backup image to make itunes work like before?
thanks!

Copy the entire iTunes folder including music to the new location.
Click on the iTunes icon to start it, then immediately press an hold the Option key.
iTunes will ask to Create new library or Choose existing library. Select Choose existing library and select the library in the folder you just moved.
You will not need to set the iTunes prefs -> Advanced.

I have already reset the printing system after my Epson workforce 600 keeps saying "filter" stopped in the print queue...

I have a Epson Workforce 600 all-in-one printer and it will STILL not print anything after the Mountain Lion upgrade. I have downloaded the latest drivers from Apple's site, tried to print thru TextEdit, it connects via Verizon Wireless 4G hotspot Wi-Fi network, printer is getting signal, macbook picks up nearby printer and installs and configures it, but when looking in Print and Scan, it shows printer is "Idle". Then when you try to get computer to communicate with printer via configuration utility, it says "communication error." What else can I do??

OS X Mountain Lion: Reset the printing system

How do I print anything after problems re-installing cs4

Similar Messages

Maybe you are looking for