How do I print Avery labels? I can do the address only using address book, but I need to add several lines of additional information.
How do I print Avery mailing labels? I can do them using my address book, but I need to have several lines of additional info. on the label. Thanks.
You chose a group of addresses you want to print and then use command-P. You will get a drop down menu where you have to select the Avery number or size of labels. It's pretty rigid.
I can't stand the limitations of the Contacts method of printing address labels. I don't want to waste a partial sheet if my selection doesn't come out even with the number of labels. I'd like to duplicate addresses which I use often to fill up the partial sheet. I like being creative with fonts, colors and even borders or images. Your ability to be creative with Contacts printing is severely limited.
I've used Pay&Play's Label Printer Pro software for years. I originally paid MUCH more for this program. It's extremely versitle. Design one label and you can copy it to the rest of the labels in the drop down menu with one click. Chose how many of whichever lablel you want to duplicate with a simple cut and paste to fill up the page.
I can vouch that it works perfectly with Mountain Lion, v 10.8.2.
Here's the link to their direct download from their website for $6.95:
http://www.payplaysoftware.com/download.html
Or you can look up Label Printer Pro 7 on the app store and pay $9.99.
No, I don't work for or have any ties to the company other than being a satisfied customer of a product which suits my needs perfectly.
Similar Messages
-
Printing avery labels in address book - margins not right
I'm using Address Book to print out labels for my Christmas card envelopes.
I've got Avery J8173 labels form Staples - 2 columns and 5 rows - 10 labels per A4 sheet.
My 2 problems are:
I can't print any more than 5 lines per address - no matter what font size I use - this is annoying with a good number of my addresses, but to get round it I put 2 address elements on one line in Address Book - not a big problem.
The other problem is that the left margin of my addresses is barely 2 mm in from the left edge of the label. This doesn't look very professional. Any ideas? If I try to create a custom label I can indent the addresses in the left column by increasing the margin for the whole page, but I can't do anything about the margin in the right hand column
Any ideas?
I downloaded Avery DesignPro for Mac, but the labels I've got (J8173) aren't listed, and there are no labels in their list which match the dimensions I need. Bet the PC version is better ...Well it all boils down to the difference between the US and the UK versions of DesignPro. I hadn't realised that I'd downloaded the US version. I trashed this and all associated files and downloaded the UK version, which has all the necessary 'templates' including J8173. Annoyingly the UK version does not have the graphical elements included with the US version. UK Customer Support told me that they were 'working on it' though why that should be such a difficult job when the US version already has this feature is beyond me!
I've still not fathomed why Address Book ...
a) makes such a mess of printing these labels - margin way too close to left edge of label
b) doesn't ley you print any more than 5 lines in an address, even when there's plenty of space
c) doesn't let you include graphical elements on labels.
Thanks, Apple for another bit of half-done software! I won't begin to mention how hard it is to print pictures from iPhoto formatted the way you want - that's for a different forum! -
How do I create avery labels 5160 on mac
How do I create avery labels 5160 on mac
I assume you mean to ask how to print in a format that will match Avery 5160 lables. You can do it with Tables or Text boxes. That's all there is to say without knowing what your content is and how it might change from label to label.
Size: 2.625" x 1"
Labels per sheet: 30 (3 Across by 10 Down)
Margins: Top 0.5" Bottom 0.5" Left 0.1875" Right 0.1875"
Jerry -
Printing avery label 5215 with my hp envy 5530
How to print Avery label 5215 with my HP Envy 5530?
Hey @MsTraveler,
Welcome to the HP Support Forum. I hope you enjoy your experience here.
I understand you're looking to print labels using your HP ENVY 5530 e-All-in-One Printer. I would like to help.
In looking into your request, I did some research and couldn't find any indication in your printer's specs that it's designed to print or handle labels. (You can click here for reference). What this means is that your printer software isn't going to give you a labels option under the paper types presented.
However, I did find that Avery provides its users with an online label printing interface that might help. Click here to give that a try.
Let me know how it works out for you. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below.
Thank you for posting in the HP Support Forum and have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
How do I print a label in pages?
Once I have typed a letter and I wish to print a label for an envelope I can not find a process or icon. How do I print a label from inside a document in pages?
You don't. You can copy & paste the name & address into an envelope template or use the very handy widget EasyEnvelopes.
-
HPC6380 - doesn't print Avery labels accruately
1. Mac OS10.6.8
2.Using Print Shop to print labels - using Avery 48860 labels
3. Printing labels used to work just fine about 1 month ago - I'm not sure of any upgrades between then and now.
4. Other-Printer prints accurately with a plain piece of paper but does not seem to like the actual label.
5. Any idea what could be the problem?
Thanks,
kathy franz
[Personal Information Removed]Hello keith0091,
Welcome to the HP Forums.
I see that you are having and issue with finding a user guide and printing with Avery Labels.
I have done some research and I have found the user guide for you.
As for printing with Avery Labels. Chances are you do not have an issue with the printer but with the compatibility with the printer and Avery Labels program.
I suggest you contact Avery Labels and see if the issue is as simple as maybe a settings change or an update.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded. -
I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?
I need to reinstall my Canon Pixma Pro 9500 MK 2 printer on my iMac running Mavericks. It looks for software but Apple cannot find. The driver is available on my computer. Is there a way I can force the installer to use the available driver?
-
HI, I recently upgraded my operating system IOS 5.0.1 on an iphone 3gs. My question is, how do I get the text messaging preview to just pop up so that I can see the name only when the lock screen is on? The conventional ways of doing this, such as using turning off the SMS preview under the "passcode lock", well that option no longer exists, or if it does, I'm somehow missing it.
When I go to the "messages" setting under settings on my phone, I still don't see an option of turning it off.
If I can just get the name of the person sending the message, as I had it before, I'd be happy.
Help!That option still exists in Settings > Notifications > Messages > Show Prview (OFF) and View in Lock Screen (ON). Here's how to configure your Notifications and Notification Center for iOS 5: http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html
-
Why can't I get my printer to print out a playlist from i-tunes? It used to work, but now the printer doesn't seem to recognize the "print" command coming from i-tunes. The printer works for other applications!
I finally solved this problem after toiling with it for a couple of days. Solution: Once you have burned your CD you must go back into iTunes to your music/playlists and select the playlist you just burned and click file; print and you will get the mosaics that we have been accustomed to. I was on hold with Apple Support when I found this myself. Yes......!!! Problem solved..for me anyway. Good luck!
Scott -
How do I set a specific page to open when I open a new tab in Firefox? I can open the page when initially opening Firefox, but not for subsequent tabs/pages.
You can use an extension to set which page to open in a new tab:
*NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
*My Homepage: https://addons.mozilla.org/firefox/addon/my-homepage/ -
How do you print an email attachment and not the email itself. please.
how do you print an email attachment and not the email itself. please.
This question was solved.
View Solution.Hi there, if there is text in the body of the email it will print automatically when sent to an ePrint email address. The only way to just have the attachment print is for there to be no text in the email body.
Hope that helps answer your question.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
I bought a song and after 6 sec. or so it quits playing and goes to the next song. How do i redownload it so i can have the whole song?
Delete it, click here, and follow the instructions.
(114426) -
I just got a new computer and need to move my itunes library from my old computer to the new computer. Does anyone know how to do this or where I can get the information? Thanks!
If you Google ipod nano 6th generation manual, you can download the PDF manual. Here's a quote from page 19:
Transfer purchased content to another computer:
1 Open iTunes on the other computer and choose Store > Authorize This Computer.
2 Connect iPod nano to the newly authorized computer.
3 In iTunes, choose File > Transfer Purchases from iPod.
Songs that are not from the iTunes store can be copied to the new computer, and you just have to do File>Add to Library to get them into iTunes. And if you don't plan to continue using your old computer, you should deauthorize it because you only get 5 authorizations for iTunes store purchases, and this will cancel out the authorization on the old computer.
Maybe you are looking for
-
How to set up aol on mail application to sync with iphone?
hello! friend of mine was trying to input his aol account to "mail" program to sync it with his iphone. is aol, pop or imap? how do you set it up? i seriously don't know because i use .mac. thank you very much for your help! have a great day and 4th
-
Open Qty for Contracts in Purchasing
Hi, Is there a standard config for Open Target Quantities for Contracts, as there is for standard POs (there is Open Qty - 0BO_QTY - within the 0PUR_DS03 transformation), but I need to show an Open Target Qty for Contracts. The value exists within RM
-
How to disable the verbose mode in HTTPS ?
Hello Everybody, I'd like to know how I can make an https connection in which the text of the transaction with the distant server doesn't show in the console here is my code : URL rawURL = new URL(url); if(rawURL.getProtocol().startsWith("https"))
-
Simple Web Auth policy and simple posture assessment policy in ISE
G'day All, I've just finished reading through the Cisco BYOD with ISE document and it's left me a little more confused than when I started. I completely understand the onboarding process and the different policy elements that make up the self registr
-
What is rollover and its concept in sql server ? And what is the concept of IAO?
would someone please tell me what is rollover and what is its concept? another question is what is IAO in sql server? Thanks in advance sqlfan