How do I print backwards, for T-shirt iron-on paper?

I have been searching for a method to print backwards. I have T-shirt iron-on paper, but to make it work, the characters must be printed backwards, in mirror-image format.
That way, when the iron-on page is used, the letters transfer to the T-shirt properly and can be read normally.
I have an HP OfficeJet 6500 E710a.
The only way I can think of is to print on a transparancy, then use the copy function on this printer to copy it backwards, onto the iron-on page.
Is there any way to make the printer actually print the characters backwards?
Thank you very much.
Alex
This question was solved.
View Solution.

I do not remember the Windows 95 beta, but I certainly may have been in the forums then. I started with computers back in the CP/M days and have been active since.
Back then I was mostly in the comp.periphs.printers and a few other newsgroups, those got killed off by spammers and I finally settled here for most of my postings.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

How to set print option for a Billing document using T-code VF02

Hi All,
Please suggest me the way to set print option for a Billing document for T-code VF02 and please let me know how to get print preview for any particular Billing document?
regards
Anand.

Enter the billing documents detail
Goto Goto> Header>Output.
Check the status for your output type in this screen.
If it is green then come back to the VF03 screen.Enter the billing document number.
Click on Billing document-->Issue output to.
Press (CtrlShiftF1) or click on the icon beside "Print options".
Here you can see the print preview.
If the status is red then click on the processing log.Here you will get the error messages.
If the status is in yellow colour,then click on the "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Before the print preview option you should make sure you have added correct output type to the relevant billing document. To do that, go to transaction VF02.
Enter the billing document no
Go to Menu option -> Go to -> Header -> Output
In that screen you have to add relevant output type. (Standard output type is RD00)
Add that & press enter key
Highlight that line & press "Further Data" button
Set "Dispatch time" as "4 Send immediately (when saving the application)"
Press "Back" Button
again select that line & go to "Communication method" button
Set "Logical destination" as LOCAL"
Don't mark "Print immediately" & "Release after output" ticks. If you mark them, sa soon as you save the billing document, you'll get a print out.
Press "Back" Button
Save
Now form the initial "Change Billing Document" screen, Go to Menu option; Billing Document -> Issue Output to
You can see that output type line appear.
select that line & press "Print Preview" button or (CTRLSHIFTF1)
You can see the print preview.
Alternatively you can use VF31 to print multiple print outs at same time.
If you want to get PDF outputs of billing documents, go to your printer settings in the your computer from Control Panel.
Set PDF Writer as "Default Printer" (Right click & select "Set as Default Printer")
Then normal way, print the billing from SAP.
It'll automatically send to your PDF writer. You can save it to the path you want,

How do I print envelopes for everyone in my address book?

How do I print envelopes for everyone in my address book? It seems so simple but after half an hour... no joy!!

I have spent most of the morning in a frustrating search of a way to print labels for my contacts. I have a couple of problems. I want to send every label to a different person at the same address. I have hundreds to do and most of them do not have a mailing address so I tried to do a bulk change of the address ... without manually changing every contact there is no way to do this. I've tried to create a template with a table (10x2) and added merge fields to each of the cells but when I do a mail merge all I get are hundreds of pages with a page dedicated to each contact whereas I want to merge on a cell by cell level, i.e. 20 different contacts on the same page.
How do I do this? I can't find label style that is appropriate and I'm not sure how to create one with 10 by 2 labels per page.
Help!

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

How to know print program for SAP Script

Hi friends,
how to know print program for SAP Script form name ?

Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
                       out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
    where id = in_tab-value.
if sy-subrc = 0.
    read table out_tab index 1.
    move scustom-name to out_tab-value.
    modify out_tab index sy-tabix.
else.
    read table out_tab index 1.
    move 'No name' to out_tab-value.
    modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
   READ TABLE out_par WITH KEY 'NAME1'.
   out_par-value = l_name1.
   MODIFY out_par INDEX sy-tabix.
endform.

How do you print ingredients for a grocery list from Recipe Box

How do you print ingredients for a grocery list from Recipe Box?
I would think that this basic functionality would be there to semi-automate the process.
Thanks!

Hi Mark,
You'd have to do something like this;
- Create a Rule in XPRESS that iterated over each of the Roles assigned to the user and invoke the java method available on the com.waveset.object.Role object
java.util.List      getSubRoleList()
          Return the current list of roles assigned to this role
<dolist name='currentRole'>
          <ref>user.waveset.roles</ref>
          <set name='roleObj'>
            <invoke name='getObject'>
              <ref>theSession</ref>
              <invoke name='findType' class='com.waveset.object.Type'>
                <s>Role</s>
              </invoke>
              <ref>currentRole</ref>
            </invoke>
          </set>
<block trace='true'>
          <set name='subRoles'>
            <invoke name='getSubRoleList'>
              <ref>roleObj</ref>
            </invoke>
          </set>
         <ref>subRoles</ref>
</block>
   </dolist>HTH,
Paul

How to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14

I want to know how to change printer preferences for HP envy 4500 using Google Chromebook HP pavilion 14?
This question was solved.
View Solution.

Hi chefcorbin,
Welcome to the HP Support forums. I understand that you would like to learn how to change the printer preferences using your Chromebook.
I have included a link to Google support on printing a page with Chrome and it lists the print settings that you can adjust.
Google Chrome Help - Print a Page
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

How can i print on the both sides of the paper on printer 5520

how can i print on the both sides of the paper on printer 5520 when printing too many papers?

Hi hamad5520
I have included a document for two sided printing.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03476083&lc=en&product=5157536&tmp...
Hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to save print setup for pdf file so that every user can open and print w/o manually performing?

Can is there a way to configure the print settings (i.e. paper size, orientation, etc.) and save this setting as part of the pdf file? I would like the users of pdf files to be able to open the file and simply print, without having to manually configure the print settings.

Not sure if this will help. I got this information from the built-in help under Acrobat 9.
Advanced
Lists PDF settings, print dialog presets, and reading options for the document.In the PDF settings for Acrobat, you can set a base Uniform Resource Locator (URL) for web links in the document. Specifying a base URL makes it easy for you to manage web links to other websites. If the URL to the other site changes, you can simply edit the base URL and not have to edit each individual web link that refers to that site. The base URL is not used if a link contains a complete URL address.
You can also associate a catalog index file (PDX) with the PDF. When the PDF is searched with the Search PDF window, all of the PDFs that are indexed by the specified PDX file are also searched.
You can include prepress information, such as trapping, for the document. You can define print presets for a document, which prepopulate the Print dialog box with document-specific values. You can also set reading options that determine how the PDF is read by a screen reader or other assistive device.
Create print presets
A PDF can contain a set of print presets, a group of document-specific values that is used to set basic print options. By creating a print preset for a document, you can avoid manually setting certain options in the Print dialog box each time you print the document. It’s best to define print settings for a PDF at the time that you create it, but print presets provide a means to add basic print settings to a PDF at any time.
Choose File > Properties, and click the Advanced tab.
In the Print Dialog Presets section, set options and click OK.
The next time you open the Print dialog box, the values will be set to the print preset values. These settings are also used when you print individual documents in a PDF Portfolio.
Note: To retain a print preset for a PDF, you must save the PDF after creating the print preset.
Print Dialog Presets
Page Scaling
Prepopulates the Page Scaling option in the Print dialog box with the option you choose:
Default
Uses the application default setting, which is Shrink To Printable Area.
None
Prevents automatic scaling to fit the printable area. This setting is useful for preserving the scale of page content in engineering documents, or for ensuring that documents print at a particular point size to be legal.
DuplexMode
For best results, the selected printer should support duplex printing if you select a duplex option.
Simplex
Prints on one side of the paper.
Duplex Flip Long Edge
Prints on both sides of the paper; the paper flips along the long edge.
Duplex Flip Short Edge
Prints on both sides of the paper; the paper flips along the short edge.
Paper Source By Page Size
Selects the option by the same name in the Print dialog box. Uses the PDF page size to determine the output tray rather than the page setup option. This option is useful for printing PDFs that contain multiple page sizes on printers that have different-sized output trays.
Print Page Range
Prepopulates the Pages box in the Print Range section of the Print dialog box with the page ranges you enter here. This setting is useful in a workflow where documents include both instruction pages and legal pages. For example, if pages 1–2 represent instructions for filling out a form, and pages 3–5 represent the form, you can set up your print job to print multiple copies of only the form.
Number Of Copies
Prepopulates the Copies box in the Print dialog box. Choose a number from 2 to 5, or choose Default to use the application default, which is one copy. This limitation prevents multiple unwanted copies from being printed.
Thanks.

How to create print document for payment to customer through cash journal

Dear Sirs,
I have a problem with print document from cash journal. I enter a payment to customer (when I turn the money to customer) and the system makes right posting, but when I try to print this point, system printing document for incom from customer. I'm using business transaction for customer posting in cash journal. I would like to know how I have to manage this posting - payment to customer, or incoming from vendor (returnes advances from emploee)?

Hi,
please check whether the two solutions below work:
1. create a contract with milestone billing plan where there are only down payment billings, so that on the basis of the contract you can generate down payment requests and then relevant down payments, release the contract to a sales order which can then be delivered and billed, manually clear the billing document with the down payments
2. from FI module, create down payment requests via t-code F-37 directly, and then down payment posting, generate sales order directly, and then deliver and bill, manually clear the billing document with the down payments

Hi All,How to set printer configuration for sap4.7 IDES version for home pr

Hi All,
Pls provide the information How to set the configuration for our home printer from the sap 4.7 IDES version .If possible pls provide with screen shots
thanks & regards.
bharat

check SPAD (tcode) to installl Printer and all formats.
Regards
Prabhu

How to define print control for TO in wm

hi
can someone help me out explaining how can i configure print control for to in wm.i donno how to set up perameters for it in spro.
thanx in advance

You have to set Spools, form names, print codes, assigning printers, auto pick list printing, number of
labels printed etc. in OMLV.
http://help.sap.com/saphelp_40b/helpdata/en/77/1939516e36d1118b3f0060b03ca329/content.htm
http://help.sap.com/bp_bblibrary/470/documentation/A09_BB_ConfigGuide_EN_US.doc#_Toc84924701

How to write print program for smartforms

Hi all
I need to develop new smartform and its print program.
But Im not experience in writing print program for smartform.
Ive gone through the simple print program sample that use only one table as input and one table for output.
But my smartforms require few tables for input and output.
How should I define the Data?
Can anyone guide me on how to write it.
Thanks & Regards
az

Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Reward points...

How to install printer drivers for monarch

Dear Friends,
I got requirement where users are going to use new printer for Bar code printing.
Kindly suggest on how to install printer drivers in SAP.
regards
Jiggi

Hi,
In tcode SPAD, goto "Utilities --> For device types --> Import".
There are specific notes regarding specific manufactures, search the SAP portal for notes in application area BC-CCM-PRN-DVM.
Check SAP Note 8928 for a start.
Regards,
Muralidhar

HT3771 how to disable printer updates for printers I do not have anymore

I'm using Snow Leopard and find that auto-update is constantly wanting to update printer drivers for printers i do not own, but might have had connected in the past. How can I disable these printers? I've spotlight searched through my system and cannot find where these printer profiles are located.

/Library/Printers/ and delete any manufacturer's folder for the ones you don't have. This is all I have left:

How do I print backwards, for T-shirt iron-on paper?

Similar Messages

Maybe you are looking for