How do I print duplicate checks?

Let's say I'm trying to print 3 checks at once. It prints the 3 and then prints the second 3. That doesn't work when you have duplicate checks. It needs to print 2 copies of the first check and then 2 copies of the second check and so on. I am using quickbooks and I've had 3 printers before this one that printed them just fine without any set up changes. I just say I want 2 copies.
I'm using Officejet J6480 AIO.
Thanks for any help.

Did you get this resolved???????

Similar Messages

How can I print duplicates of a photo on the same page?

I'm using iPhoto. I have two photos I want to print. I want to print two copies of these photos on one sheet.
When I try to print, at the second window in the process, I get a large white bar across most of the page and the computer locks up.
I did print one of the photos without a problem. The other photo will not print, giving me the same white bar with lockup. The photos don't seem to be different in any material way.
Help!

You can render the ebook on an instructional application called Zankura. Not only can you control the screen scrolling, but all the students can freely annotate with their stylus. www.zankura.com.

Duplicate check for Connection Objects in CRM

Hi,
I want to implement a duplicate check for connection objects in CRM. The duplicate check shall use the address of the connection object and perhaps additonal attributes. I have found a duplicate check for business partners using the basis address service and TREX as index pool. However, I couldn't find a similar functionality for connection objects. Does somebody know:
1) How to implement a duplicate check for connection objects which is based on the address of the connection object?
2) Is there a way to use the TREX-based duplicate check which is integrated into the basis address service for connection objects?
Thanks in advance!
Best regards,
Frank

I also have a requirement to check for duplicate address at connection object level and we are using SAP data servies to validate the address. Can anyone share their experience.

Printing many checks on a single sheet

Is it possible to print more than one check on a single piece of paper?
The requirement is just to print cheques, and not provide address details or remittance details.
has anyone done this before?
Is there some logic that will stop this?

Hi,
Are you talking about printing duplicate check details on a single sheet or the original checks on a single sheet. Are you using the check stationery supplied from the Bank or is it somethng else.
If you wish to print original checks on the pre printed stationery supplied by the bank, then you cannot print many checks on a single sheet
But if you wish to print duplicate chekcs on a single sheet, you have to co ordinate with your abap consultant who can help you further. I am not sure if this can be possible as the checks are printed page wise.
hope this helps
regards,
radhika

Print 3 checks in single page Thru F110

Hi
I have a req to print 3 checks in a single page from Tcode F110..
Do i need to look for any User-exit to do this? OR
Do i need to copy the standard Prog RFFOUS_C and modify according to the req..Which is the best option?
If the modifying the Std prog is the only option Could you please let me know where exactly i need to modify the change
Please let me know
Govi

I forgot to mention this
Which form should i use? is it F110_PRENUM_CHCK or F110_MX_CHEQUE?
I only want to print name amount date on this form ...coz we wil use the pre printed checks so only name amount date will be printed on that paper..Iam not sure how can we print 3 checks in single page using the standard program and Custom script..
Please advise
Govi

How to print " Duplicate " in FORM ( either Sap Script or Smart Forms )

hi,
How to print " Duplicate " in FORM ( either Sap Script or Smart Forms ) if trying to take second Print Out and the FORM is already Printed.
Please let me know the condition that we should go for.If possible let me know the SAMPLE code since this will be used in most of the FORMS.
Regards
Avi

Hi
It depends on which print you're working.
If it's a print of standard document you can check the NAST (VSTAT field) table in order to know if the document was printed.
If a message is created you can find the hit in NAST table:
VSTAT = 0, document not printed;
VSTAT = 1, documment printed
VSTAT = 2, print is failed
If you mean a custom print I believe you need to create a log like NAST table.
Max

XML Publisher Check Print - Voiding Duplicate Checks

XML Publisher Check Print - Voiding Duplicate Checks
I am printing checks using XML Publisher. The checks print fine but when the number of invoices for a check exceeds the length of the first page I want the subsequent copies of the check to print VOID on them. How can I do this?
Thanks
Naveen
[email protected]

Ravi,
Our check print format has 3 portions
1. Invoice numbers (TOP of the page)
2. Vendor/Check Details (MIDDLE of the page)
3. Currently it is Blank (BOTTOM of the page)
Currently, I'm able to print single check. but when it comes to batch invoices
I'm printing 13 invoices per page. In my case i have 32 invoices
first two pages printing blank on (MIDDLE of the page) and on last page printing check details.
Client wants to print VOID CHECK on first two pages or last two pages.
Please respond where to add logic.
Additional info: I'm using Dharsan's template link is
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary-2.html
Thanks in advance
Naveen
[email protected]

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

How can I print multiple copies of the same photo onto one sheet of paper? Do I have to Duplicate the photo in iPhoto and then select them all?

no - you simply have to select the option to print mucliples of a photo on a page
select the photo and go to the file menu ==> print - select the printer, paper size and print size and click customize - in the tool bar click on the settings icon (the gear looking thingy) and select "multiple of the same photo per page" and the preview will reflect this option showing a full page of the selected size photos
LN

Duplicate check via BAS (ADDRESS_SEARCH)-- how to handle non-crm customer?

Dear all,
I'm implementing a duplicate check and using the BADI Address_search. Within this BADI I use the method "Address_Search" for calling a third party software tool with customer information. This tool checks whether the entered customer is already available in CRM AND in other system in our company holding.
The method provides me a list of all found duplicates (incl. non-crm customers)
My problem is that I need to fill a export table "ex_t_search_result" (type adkey_indx_tab) of this method which expects ADRC number. For the CRM customer it is not a problem. I can figure them out by table BUT020 and the customer number. But for the non-crm customer I do not have a ADRC number.
I know there are some methods for creating addresses in BAS (function group SZA0), but actually Im not sure how to handle them.
Does anybody of you had faced a similar issue?
Thanks for your help
Firat C.

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

How to print copy check print from F110 tcode

Hi All,
My requirement is to print original check in one tray and copy check in second tray from t.code F110.
I have developed a new form and assign it in
FBZP ---> Payment methods company code -
> Payment methods 'C' (Check)
> Form Data -
>Next form.
But the problem is the new form which i have created is not printing.
Can we attached two form to one print program or is there any other way to print a copy check print in different tray.
Thanks,
Ali

Hi,
It is not required to attach one more form. You can just create another page with duplicate check and in the pages tab there is an option to set the trays.
Set the Tray1 for First Page in
<b>Print Attributes</b>
Resource Name TRY01
and second Page
<b>Print Attributes</b>
Resource Name TRY02

How to control the line number printed on check overflow

Dear All,
Our customer is on SAP2007A SP01 PL07, SQL2005, US localization. They don't have 3rd party add-on up and running when they print the checks. I have their database restored on PL08.
Administration >> System Initialization >> Print Preferences >> Per document >>
Print on: Check stock >> Overflow Blank Paper >> Maximum lines 10
Then if the check has more than 10 lines of invoices, SAP will print it on a blank paper.
However, the system print 12 lines on the blank paper ( < 1/2 of the paper) and go to the next page. How can we let the system print the invoice info on one page (One paper looks like could have over 40 lines).
I also reproduced this on SBODemo DB. May I have someone try it? Before I log SAP a tech support message, we would like to make sure if this is a SAP behavior.
Thanks in advance.
Regards,
Yuka
Edited by: Jie Jin on Feb 8, 2010 11:03 PM

Dear all,
I did more test today in their database.
1) Use stub-check-stub (system) PLD: Overflow is 12 lines per page (1/3 of the page)
2) Use stub-stub-check PLD: Overflow is 32 lines per page (2/3 of the page)
3) Use No stub-stub-check PLD: Overflow is 34 lines per page (2/3 of the page)
4) Use long stub-check PLD: Overflow is 30 lines per page (2/3 of the page)
5) Use check-stub-stub: Overflow is 48 lines per page (full page)
It looks like only check-stub-stub can print overflow invoices info on the full page. Other PLDs can only print overflow invoices info on the stubs. This can be reproduced on CA and US databases.
Is this a system behavior or a bug? If I cannot have an answer here, whom should I speak to? Thanks.
Regards,
Yuka
Edited by: Jie Jin on Feb 9, 2010 4:56 PM

How to print/reprint checks/vouchers only

The client requires check printing & voucher using pre printed checks and vouchers separately. They opted for an option that can reprint any check or any voucher anytime. Some FI consultants say it has to be a separate program for the check printing and vocuher printing but some says that it can be done using the standard program.
Is there a way that I can use the standard SAPscript program to print/reprint checks only or voucher only?
Sorry i posted this on Data Transfers. This should be in Forms.

Hi,
Ya for that u have to configure your script/smartforms in nace only and in standard program give condition when u call it .........
Rewards points if it is useful.

How can I print the A/R Invoice in 4 copies

Hi Experts
Please let me know how Can I Print the A/R Invoice in regard 4 copies [crystal reports]
For Example,
1 [first] COPY ORIGINAL FOR BUYER
2 [secand] COPY DUPLICATE FOR TRANSPOTER
3 [thired] COPY TRIPLICATE FOR ASSESSE
4 [fourth] COPY EXTRA FOR ACCOUNT
please do let me know how to do the both and how can I make the both of the print at same time.
Thanks in advance
Bhavesh Kansagara

Hi Bhavesh,
Fristly you creat a Crystal Report for A/R Invoice (4 copies ie. 4 RPT file) then follow the following step.
Administration -->Steup -->General --> Report and Layout Management
--> Report and Layout Management form are open
--> Click the Sales A/R option
--> A/R Invoice option
--> AR Invoice (Items)
--> Then Import all the 4 Copies (4 RPT files)
--> Then Click the Printing Seq
--> Click the New Button then Sequence Details form are open.
--> Then select A/R Invoice on Object cell
--> Select all the layout
       1 First COPY ORIGINAL FOR BUYER
       2 Second COPY DUPLICATE FOR TRANSPOTER
       3 Thirth COPY TRIPLICATE FOR ASSESSE
       4 Fourth COPY EXTRA FOR ACCOUNT
--> Save it.
And the check the Print preview
File -->Print Sequence --> Select the Print option.
Regards
Kamlesh Naware

How can i print out the waveform chart?

hello everybody,
how can i print out the "waveform chart". can i do it just push the button. ( example; stop button is stop the program etc..)
i checked the NI examples but i can't understand. i'm new to the Labview.
pls help me.
i added the my program
look forward your reply
regards from turkey...
Message Edited by hknmkt on 05-29-2008 04:15 AM
Attachments:
29.05.2008_11.vi ‏37 KB

hi jim,
i tried the program but it's not running. When i run the program, it's print out without run the program
i added the printed file.
look forward your reply
hakan
Attachments:
error8.JPG ‏8 KB

I am new to Numbers and can not figure out how to only print a section of my rather large spreadsheet. How do I only print a specific page?

How do you print only a page or section of a spreadsheet in Numbers?

Hi Kirsten,
Copy the section you want to print, Insert a new Sheet into your document, Paste the copied contents into the Table that comes with that sheet. Print that sheet.
If this will be a regular need, you might consider building a breakout table to contain the data you'll print. A search for "breakout" should bring up some examples (or check some of the "More Like This" linke to the right.
Numbers doesn't support a means of printing a selected section of a document, probably because the design model is of a document containing many small specific purpose tables, rather than the single monolithic table that is the model in other spreadsheet applications.
Regards,
Barry

How do I print duplicate checks?

Similar Messages

Maybe you are looking for