How do I print from a 64-bit client to 32-bit printer?

My company just bought 2 new pcs, 3120MT and they are 64bit windows 7 Pro. Since there's just one printer in the office, it's connected to a Windows XP Pro 32bit machine. How do I get my new pcs to print from the network to that machine?
Spoiler (Highlight to read)

Sharing from Windows XP to any newer OS might do you a problem, as the host PC's OS have drivers for older operating systems only.
The easiest way would be to share it from the Windows7 to the Windows XP
We can try setting the sharing manually by using an alternative driver, However, you will have to provide me your exact printer model in order to provide you any possible steps to try.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • How to set SSL from an Webservice EJB client

    I want to invoke a web service from a stateless session EJB. How do I
    configure Weblogic 9.0/8.1 so that the transport uses SSL? I have a set of
    SSL related properties that I want to set e.g. Client Authentication
    Enabled, Private Key file, Client Certifiicate file etc.
    Note that I am NOT using weblogic native programming (i.e.e jws
    files/controls and annotations) to create the web service client. It is a
    simple EJB that was developed outiside weblogic and runs in the weblogic
    container.
    How do I set the SSL related properties in this case?
    Thanks for any help.
    Shantanu Sen

    You configuring both the server and client side? And how exactly is you're client implemented?
    A bit difficult but basic way to do this is with SSLSocket and giving that the necessary keystore which holds you're client certificate (key) and the server CA.
    Then push you're soap envelope with http-headers up the socket?

  • BPM 10.3 Studio how to use PAPI from stand alone java client

    Would you help me ...., the search for the relevant information in this forum or documentation has not helped!
    I'm running the BPM process via studio and trying to call it from the standalone java program.(According documentation
    I need ... fuegopapi-client.jar and directory.xml )
    Well, of course I could find somewhere directory.xml but it is not the right one .. What are the values(related to directory Service) which are needed to run this
    java code agains the process started from the studio... ? So what I should do...? to setup and configure in BPM10.3 Studio to be able to run this code agains the
    BPM process ...?
    thanks a lot
    Tomas
    ..otherwise the java code look like this ...
    public static void main(String[] args) {
    /////////////////// API Initialization ///////////////////
    Properties configuration = new Properties();
    configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
    configuration.setProperty(ProcessService.DIRECTORY_PROPERTIES_FILE, "directory.xml");
    configuration.setProperty(ProcessService.WORKING_FOLDER, "c:\tmp");
    try {
    ProcessService processService = ProcessService.create(configuration);
    /////////////////// Establish a session ///////////////////
    ProcessServiceSession session = processService.createSession("test", "test", "localhost");
    /////////////////// Operate with PAPI ///////////////////
    for (String processId : session.processesGetIds()) {
    System.out.println("\n Process: " + processId);
    for (InstanceInfo instance : session.processGetInstances(processId)) {
    System.out.println(" -> " + instance.getId());
    /////////////////// Close the session ///////////////////
    session.close();
    /////////////////// Release API Resources ///////////////////
    processService.close();
    } catch (CommunicationException e) {
    System.out.println("Could not connect to Directory Service");
    e.printStackTrace();
    } catch (OperationException e) {
    System.out.println("Could not perform the requested operation");
    e.printStackTrace();
    }

    Would you help me ...., the search for the relevant information in this forum or documentation has not helped!
    I'm running the BPM process via studio and trying to call it from the standalone java program.(According documentation
    I need ... fuegopapi-client.jar and directory.xml )
    Well, of course I could find somewhere directory.xml but it is not the right one .. What are the values(related to directory Service) which are needed to run this
    java code agains the process started from the studio... ? So what I should do...? to setup and configure in BPM10.3 Studio to be able to run this code agains the
    BPM process ...?
    thanks a lot
    Tomas
    ..otherwise the java code look like this ...
    public static void main(String[] args) {
    /////////////////// API Initialization ///////////////////
    Properties configuration = new Properties();
    configuration.setProperty(ProcessService.DIRECTORY_ID, "default");
    configuration.setProperty(ProcessService.DIRECTORY_PROPERTIES_FILE, "directory.xml");
    configuration.setProperty(ProcessService.WORKING_FOLDER, "c:\tmp");
    try {
    ProcessService processService = ProcessService.create(configuration);
    /////////////////// Establish a session ///////////////////
    ProcessServiceSession session = processService.createSession("test", "test", "localhost");
    /////////////////// Operate with PAPI ///////////////////
    for (String processId : session.processesGetIds()) {
    System.out.println("\n Process: " + processId);
    for (InstanceInfo instance : session.processGetInstances(processId)) {
    System.out.println(" -> " + instance.getId());
    /////////////////// Close the session ///////////////////
    session.close();
    /////////////////// Release API Resources ///////////////////
    processService.close();
    } catch (CommunicationException e) {
    System.out.println("Could not connect to Directory Service");
    e.printStackTrace();
    } catch (OperationException e) {
    System.out.println("Could not perform the requested operation");
    e.printStackTrace();
    }

  • HT4972 DOWNLOAD TO IPAD 3 FROM YOUR 64 - BIT COMPUTER HOW TOO PLEASE HELP ?

    INSTRUCTIONS  ON  HOW  TO  DOWNLOAD  STUFF  FROM  YOUR   ( 64 -BIT COMPUTER )   TO  YOUR   ( I PAD-3 )    >   PLEASE HELP ???

    Why don't you install Dropbox on both your computer and iPad. Whatever you copy and paste to your Dropbox will automatically appear in your iPad and vise versa.
    http://i1224.photobucket.com/albums/ee374/Diavonex/b90c9d4d.jpg

  • How can I wirelessly print from a 64-bit Windows 7 laptop to a printer on a 32-bit Vista laptop?

    My DeskJet 722c is connected to my 32-bit Vista computer.  I would like to print documents out on the printer from my 64-bit HP ProBook S-series laptop, which is running on Windows 7.  I can do this if I disconnect the printer from the 32-bit computer running on Vista and connect it to the computer running Windows 7.  But I don't want to go through the hassel.  How do I connect to the printer from my Windows 7 computer, going through my Local Area Network?  Do I need to install a Windows 7 driver on my Vista machine?  Do I need to install a driver for Vista on my Windows 7 machine?   If so, how do I do this?   I'm confused

    Hello-
    I don't think your printer has network ability.
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    Donald

  • Bought a new Canon MG7540 printer to replace the old HP A618. When printing vector objects from Illustrator, they look like graphics from dandy (8 bits) ... no smooth, all cubes ... if do raster than print perfectly.  Who knows how to treat it? No well to

    Bought a new Canon MG7540 printer to replace the old HP A618. When printing vector objects from Illustrator, they look like graphics from dandy (8 bits) ... no smooth, all cubes ... if do raster than print perfectly.  Who knows how to treat it? No well to rasterize vector before each printing. OS - MacOs 10.10.

    Have you read the User's Guide for that printer?  Odds are you will get reasonable prints.  However, it is a photographic printer.  That said, it should print excellent quality photographic files.  To get smooth lines in Illustrator, try Preferences > Use Anti-Aliased Artwork.  That will smoothen the output.  If, for some reason, that does not work, try Print > Save As PDF > open PDF in Reader and print from there.  Check the User's Guide for media sizes available for your particular printer.  Setup your artboard to the size page you want the image to print on.  Use View > Show Page Tiling ( to see where the page's printable area lies.  Align the page with the artboard using the Page tool.

  • How can i print photo's from my computor to my photosmart 7515 windows vista 64 bit with updates

    How can i print photto's from my computor to my photosmart 7515 hp 
    OS vista 64 bit

    Hi,
    You can print from iPhone that means your printer is connected to a wireless network and definitely you can print from your computer which has wireless (or using USB cable).
    Now go to the following site to download driver and applications for it and install them on your pc/laptop:
      http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5096​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How can I print address labels from numbers spread sheet

    How can I print address labels from numbers spread sheet

    CAB,
    The 5163 template has the following dimensional specs:
    Dimensions & Info
    Length: 4.00000"          Height: 2.00000"
    Top Margin: 0.50000"          Bottom Margin: 0.50000"
    Left Margin: 0.18000"          Right Margin: 0.18000"
    Hor. Spacing (gutter): 0.14000"          Vert. Spacing (gutter): 0.00000"
    Intended Use: Mailing Labels, Shipping Labels, Address Labels
    There's a great vendor site with this data readily available, better than the Avery site in my opinion. But, you can get the same info in the Contacts Print dialog pane.
    You can grab a template matching these dimensions from that vendor site, Copy the table after opening the Word Template in Pages and drop the into a blank Numbers Sheet.
    I found that Sheet side margins of 0.15" worked better than 0.18. For some reason the table wanted to flow to the next page to the right with 0.18". Turning off the Headers and Footers and setting Top and Bottom Margins to 0.5" worked well. These adjustments are made in the Sheets Inspector.
    So, that will put the template you specified into a Numbers document and you can print labels properly aligned from there. Since your problem statement is a bit lacking in detail, that's all I can offer you at this point.
    Jerry

  • How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

    How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
    I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past?  Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

    Very glad you added that bit of information because I see different problems similar to this.  I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Printing from a 32 bit client in a 64 bit environment (laserjet 4000 n with windows 7)

    I have a HP laserjet 4000n connected to a 64 bit windows 7 machine.  Another client (32 bit) on my network wants to print to that printer.  I saw on the support website instructions for how to do this:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=...
    So far, I have installed the 64 bit driver (just re-installed and I can print from the 64 bit server).
    I then downloaded the 32 bit driver files (for PCL 5) and saved them.
    I then went to the printing properties of  the printer and chose advanced drivers and checked the box "x86". The instructions called for finding the file "hpcuXXXc.inf".  In the printer driver folder, there were 2 subfolders - one marked 64 bit and inside that folder was a file "hpcu112t.inf" (file ends in "t" not "c") - so I chose that file and pressed ok and got the following error message:
              The specified location does not contain the driver HP LaserJet 4000 Series PCL5 for the requested processor architecture.
    I then downloaded more drivers (for PCL 6 - even though my printer is labelled PCL 5).  This time, I got no 64 bit subfolder (only one folder labelled windows vista).  However , there WAS a file labelled "hpcu112c" this time - so I chose that and still got the same error message.
    Help!?
    Thanks.
    Janc

    Phychopomp1,
    Windows 7 64 bit is able to run 32 bit programs. However, some programs will have issues.
    Have you checked your programs against the Windows 7 compatibility list: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=2394
    This should tell you if they are compatible or not with Windows 7 64-bit.
    There are compatibility settings that you can try once you have installed the software also. Right click on the shortcut and choose properties, then go to the compatibility tab and try the various OS settings.
    If those things fail, then you should try Windows XP Mode (convenience link: http://www.microsoft.com/windows/virtual-pc/download.aspx). This will allow you to install your programs in a virtual copy of Windows XP SP3 using Windows Virtual PC. Once XP Mode is installed, when you install your software into it, you will get a shortcut to use the program from your Windows 7 start menu without even seeing the XP Mode window.
    Hope this helps,
    David
    Windows Outreach Team – IT Pro
    http://www.microsoft.com/springboard

  • How do I print a poster of my print job on a hp officejet j3680/windows7 64- bit?

    How do I print a poster of my print job on a hp officejet  j3680/windows7 64- bit?

    FredAfrmCgAz, can you set the document you are trying to print to be separate pages? If you can I would set it up to print that way, though this might mean that you have to adjust margins/allow borderless printing.
    What program are you trying to print from? What is the file type (.jpg, .png, .pdf, etc)?
    Let me know!

  • How to stop auto from-feed on a dot matrix printer for printing only a single line of data at a frequency of 30 seconds

    Hello friends
    In a particular application, it is required to print a single line of data on a dot matrix printer (continuous sheets) at a frequency of 30 seconds. That is printing is to be carried out line-by-line on the same form without a form feed.
    We are facing a problem of a form feed after printing of each line. Kindly help me to solve this problem of auto form-feed. How to continuously print at a regular interval without from-feeding.
    Shahid Baig

    Is this printer connected to a network?
    You may need to look at the printer manual to see if there is a setting for a form feed.  I remember when we had a dot matrix printer on the network about 12 years ago, there would be a network timeout setting of something like 30 seconds.  So if you didn't continue to send data, the network will end the print job and send the file to the printer which would auto form feed at the end.  Many of our basic programs had to be rewritten because they would do an LPRINT periodically, if you took along time progressing through the inputs, you would easily hit the 30 second timeout.  So all the programs had to be rewritten to save the data to be printed to a file, and only once you execute a print command, it would read the file back in and Lprint it (or a Print#1) to the LPT port.
    Since the printer was on the network, and basic could only print to LPT's, we had to use a net command to capture the LPT1 port and direct it to the network queue.
    I don't remember all the details, but those are the bits and pieces I do remember.  I think the answer to your problem lies in there somewhere.
    Namely:
    1.  Printer setting to auto form feed.
    2.  Network setting that closes print job after timeout period.

  • How do i print from my mac powerbook 15.2 to my hp c-4180 printer

    i have wifi from comcast.my mac powerbook accepts it and shows the server.when i try to print yo my hp -c-4180 photo smart it sends a printing stopped message . i am not real tech savey but learn quickly .Why? isin't it printing .perhaps it needs a driver?

    Hello @COOP1950 and welcome to the HP Forums!
    I'd be happy to lend a hand, I just need to ask a few questions to get a bit more information
    1. Which version of Mac OS X is on your computer?
    2. How is the printer connected to the Mac?
    3. Do you have the HP software installed (if it's available for your printer/operating system)?
    4. What program are you trying to print from? Do you get the same result from all programs?
    With that information I'll be able to have a deeper look into things for you!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How do I print from my iPad 2 to my Lexmark 900 series printer?

    How do I print from my Ipad2 to my Lexmark 900 series printer?

    The Lexmark Pro900 Series is not AirPrint compatible but you can use the LexPrint app to print from an iOS device. You would also need to install the LexPrint Listener to a host computer which will serve as a bridge for your printer and iOS device. Just go to http://bit.ly/KY8eCI for more information.

  • How can I print some pages from multipage report

    Hello,
    I have created a multipage report in word. I would like the user to be able to print the pages selected (as in word printing: pages: 1, 2-3); 
    I am using Office 2007 pro, the LabVIEW Report Gen Toolkit, LabVIEW 2009, and Windows XP.
    I used the suggestion in thread:
    http://forums.ni.com/t5/LabVIEW/How-can-you-print-a-single-page-of-a-multipage-report/m-p/155233 , modifying the print VI that comes shipped with LabVIEW: NI_ReportGenerationToolkit.lvlib:Word_Print.VI.
    first of all I put two integer constants on "From" and "To" in the Invoke node (PrintOut), but Labview return an error:
    Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi -> print2.vi
    Then I searched for PrintOut Method in word 2007 Reference guide, and I saw that for using From and To the Range field must have the string  wdPrintFromTo;
    I insert wdPrintFromTo string  in RANGE Field and tryed.... same error......
    After that I change approach; removed all constants and used the field Pages; I put a string "1-2" connected to this field and now the printer respond, but all pages was printed!
    What's wrong?
    many thanks
    Attachments:
    print2.vi ‏18 KB
    parte comune.doc ‏43 KB

    Thanks, Alex!
    ok, I try first approach in print4.vi, but Labview return an error (view jpg); if I cut From, To controls, the VI print all pages. The same things happen also if I trasform I32 in Variant.
    I don't try second approach, because at this time I have only one report
    I try also with VB macro: this is better (print3.vi) but.....if I use:
    Sub Print_Pages_From_To()
    ActiveDocument.ActiveWindow.PrintOut Range:=wdPrintFromTo, From:="2", To:="3"
    End Sub
    is ok; print the pages selected; if I use:
    Sub PrintPages()
    ActiveDocument.ActiveWindow.PrintOut  Pages:="2-3"  
    End Sub
    printer print all pages.
    what do you think?
    regards,
    Italo
    Attachments:
    print Problem.jpg ‏39 KB
    print4.vi ‏19 KB
    print3.vi ‏19 KB

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • How to nil noted items

    hi all i was done the setting of noted items for customer and vendor but one problem are there my problem i want to nil this balance, how to nil this customer and vendor balance , which t code i will use there for do the nil balance. Thanks you Prava

  • No drivers installed on windows xp

    Hi, I need help!! i installed windows xp with boot camp. Then i tryed to install the drivers of the mac os dvd.. but somehow it didnt work! i installed the update 2.1 but there were still drivers missing. The drivers missing (yellow in windows hardwa

  • Error while creation of shopping carts

    Hi Can anyone help me with the following problem. Error in price at the time of creating SHC fro catalogue item mentioned below article no. 0452202 then a pallet is to cost 3275,05 (you can only order min. 10 pallets). The system multiplies up the pr

  • Payment Terms with discount

    FI Gurus, I recently created  a new payment terms with a discount of 1 percent if paid within 10 days. Payable net if paid after. Everything has been going fine, up until I had a payment with a invoiced ate of Nov. 2008. I have the configuration to c

  • Can't Install New Software

    Just bought photoshop elements 11 and having problems with the serial # installation?