How do I print General Ledger Balances for a particular day

HI Sap Gurus,
I want to print general ledger balances as of a particular day/date.  I did use FBL3n, but it gives me with line items,
I want just the totals.  Do you know of any other report I can use.
Would really appreciate the help
Thanks so much will surely avoid points
Pearina

Hi Ms. Pearina
The only way you can get the totals for one date is using FBL3n or the S_ALR reports & the only way you can print only the total instead of every line item is by running FBL3n & clicking on the ' * * ' at the bottom line that shows the total of the GL account.  Then you will be able to eliminate all the line items from your print out.  You can save this as a layout & call that layout everytime you only want to see the totals.  You can also default the layout if you want.
Any further questions, please post your follow up...
If useful, award points please...
Thanks
Morgan

Similar Messages

  • Difference in Ar01 and General ledger balance for Accumulated Depreciation

    Dear all,
    I am facing a peculear problem that my Accumulated Depreciation amount which is not matching with AR01 repoert and My Accumulated Deprecaition G.L a/c from FS10n.
    Last year it was matchning. I am useing ECC 5.0 version of SAP.
    I am assuring full points.
    b.s.rao

    With the transaction ABF1 you can correct this (search on this forum how this transaction is working)
    before you are make this posting you should found out what the reason is for the differences! Found out on the g/l accounts where you have differences and go then to the details.
    Transaction ABST2 - Account Reconciliation can help you to to found the accounts with differences

  • How do I print out a receipt for my subscription

    how do i print out a receipt for my subscription

    Hi benitaroth,
    Please see Manage your membership and payments | Creative Cloud. You can find instructions for printing your receipt in the Payment & Credit Cards section.
    Please let us know if you have additional questions.
    Best,
    Sara

  • How do I print a contact report for a select group?

    How do I print a contact report for a select group?

    You should be able to select the group instead of all contacts. Older article.
    Contacts – Print Contact Information

  • How can I check my outstanding balance for apps I've downloaded so I can clear it so I can update my apps?

    How can I check my outstanding balance for apps I've downloaded so I can clear it so I can update my apps?

    I believe the item will get automatically charged to the credit unless it is an item for which such a payment method is not valid (e.g., a gift card).
    Showing account balance in iTunes and on a mobile device - https://discussions.apple.com/message/20443884

  • How do I check my account balance for an itunes gift card I redeemed on my iphone 4?

    How do I check my account balance for an itunes gift card I redeemed on my iphone 4?

    Welcome to Apple Communities
    Go to App Store or iTunes and you can see it at the bottom of the app

  • How to find open SO Items with tax code for a particular day?

    Dear all
    If i want to see all open SOs(items), with tax code for a particular day, how to find using table VBAP in SE16?
    Please guide me
    Edited by: Julius Bussche on Mar 3, 2009 11:10 PM
    Please use descriptive subject titles and the search

    Hi GB,
    Its always better to see through the standard reports , as you will be able to see the aditional info as well.
    In the case of table in se16 you will be able to see one table at a time and then you need to manually figure out the fields that required.
    For example if you want to see the sales order details through tables then
    1.You have to go to VBAK to see the document type and then you need to go to VBAP to see the items , it means that you need to access 2 tables for this simple thing ....
    In standard reports there will be lot of joins between the tables and you can view the data more elobarately as weel.
    Note : In general if you want to see the complete details of the documents(open), then pls use the reports.
    Regards,
    Vvieks

  • I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

    You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

  • How do you change the pink highlight for the present day in calendar when in week view

    How do you change the pink highlight for the present day in calendar when in week view - OSX Maverick

    the current day was light blue in ical in 10.6 but with plenty of contrast, but I recently made the bigger leap all the way to calendar in 10.9. the choice of color is terrible for reasons such as Spile1962 puts below, but also not having any way to tweak it is terrible. I'm on a bran d new imac and can barely see a difference and frankly, while I appreciate the subtlety, I still forget to look for the darker bar across the top of the current week and day. we should be able to adjust weekend and current day bg colors.
    I went into the app's package contents in hopes that they were using a tiff/png file that I could tweak on my own but couldn't find anything for them. all the icons are there, as are the bg sets for all the little pop-ups and things, but I couldn't even find a reference to a hex color in the plist file.
    send apple feedback. I just did myself, except that Calendar hasn't made the list (yet?), only iCal up to version 4.x, and Messages is still only iChat for feedback, and some others are old as well. apparently after steve died, apple's attention to these details just died with him. it's been that long since those other apps should have been relevant on their site.

  • How to set a default Billing type for a particular Delivery type

    Dear All,
    How to set a default billing type for a particular delivery type.
    My requirement is, we are creating delivery for a Stock Transport Order. Delivery type is NL and the Purchase order type is UB.
    When we are creating Billing, it should take Billing type "ZSTO" by default, which is the customised Billing type.
    Where we have to do this setting?
    In case of normal sales order, this control will be available in the Sales order document types.
    In case STO, how to set a default billing type for a delivery type (NL).
    Regards,
    Rajesh

    There is a customization available here no default or hard coded
    Normally in a sales doc type we mention which billing type system has to pick
    If the billing happens from a PO which billing type system will take depends on the controls set in the areas mentioned below
    Go to your delivery type OVLK (say your delivery type is NL)
    In that there is a field called default order qty in the order reference tab (say if you maintained DL there)
    This DL is called PSEUDO order type
    Then in VOV8 for DL based on the billing types mentioned ,system will take the billing doc
    For delivery related billing say if you mention say ZF8 in the details of DL in VOV8(provided you have created ZF8)
    Then while you bill the delivery doc of NL system will take ZF8
    For intercompany delivery you can create ZIV billing type also Pure customization
    PO is linked to delivery type ( MM spro settings)--Del type linked to order (pseudo) type---in order type (pseudo) we mention the billing types. Here the flow is bit different that pure SD flow
    Though the invoice is crated by manually putting customized Biiling Type and A/Cing doc also generated, but in the VF04 still system shows the same deliveries pending with Billing Type (F2).
    This manual is not reqd if the said assignments are done properly
    Hope it can assist you.
    Thanks & Regards
    JP
    Edited by: J Prakash on Jun 23, 2010 4:05 PM

  • I have currently suspended my jetpack for a 90 day period.  How do I continue to suspend this for another 90 days?

    I have currently suspended my jetpack for a 90 day period.  How do I continue to suspend this for another 90 days?

    Suspensions are only temporary.  After the suspension period is up then the device will be reactivated. It is up to you to call/sign in and resuspend any devices of interest.  Note that there are some limitations to suspending your devices.  In some cases you can only suspend so many times within a period before you lose the ability to do so.
    See this knowledge document for more info:
    Suspend Service FAQs | Verizon Wireless

  • H we find the balance for a particular gl account

    h we find the balance for a particular gl account for a particular fiscal year

    Try T-code FS10N it will display G/L balance for a fiscal year period wise & busiseness area wise.
    anya

  • How can i find the exact BADI For a Particular Transaction

    hi ppl,
    How can i find the exact BADI For a Particular Transaction. Is there any Standard transaction or Programs to do this or suggest some other way.

    Use this code:
    *& Report  ZGET_BADI
    REPORT  ZGET_BADI.
    TABLES : TSTC,
    TADIR,
    MODSAPT,
    MODACT,
    TRDIR,
    TFDIR,
    ENLFDIR,
    SXS_ATTRT ,
    TSTCT.
    DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
    DATA : FIELD1(30).
    DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
    PARAMETERS : P_TCODE LIKE TSTC-TCODE,
    P_PGMNA LIKE TSTC-PGMNA .
    DATA wa_tadir type tadir.
    START-OF-SELECTION.
    IF NOT P_TCODE IS INITIAL.
    SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
    ELSEIF NOT P_PGMNA IS INITIAL.
    TSTC-PGMNA = P_PGMNA.
    ENDIF.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'PROG'
    AND OBJ_NAME = TSTC-PGMNA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM TRDIR
    WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC EQ 'F'.
    SELECT SINGLE * FROM TFDIR
    WHERE PNAME = TSTC-PGMNA.
    SELECT SINGLE * FROM ENLFDIR
    WHERE FUNCNAME = TFDIR-FUNCNAME.
    SELECT SINGLE * FROM TADIR
    WHERE PGMID = 'R3TR'
    AND OBJECT = 'FUGR'
    AND OBJ_NAME EQ ENLFDIR-AREA.
    MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
    ENDIF.
    ENDIF.
    SELECT * FROM TADIR INTO TABLE JTAB
    WHERE PGMID = 'R3TR'
    AND OBJECT in ('SMOD', 'SXSD')
    AND DEVCLASS = V_DEVCLASS.
    SELECT SINGLE * FROM TSTCT
    WHERE SPRSL EQ SY-LANGU
    AND TCODE EQ P_TCODE.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) P_TCODE,
    45(50) TSTCT-TTEXT.
    SKIP.
    IF NOT JTAB[] IS INITIAL.
    WRITE:/(105) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    *Sorting the internal Table
    sort jtab by OBJECT.
    data : wf_txt(60) type c,
    wf_smod type i ,
    wf_badi type i ,
    wf_object2(30) type C.
    clear : wf_smod, wf_badi , wf_object2.
    *Get the total SMOD.
    LOOP AT JTAB into wa_tadir.
    at first.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 'Enhancement/ Business Add-in',
    41 SY-VLINE ,
    42 'Description',
    105 SY-VLINE.
    WRITE:/(105) SY-ULINE.
    endat.
    clear wf_txt.
    at new object.
    if wa_tadir-object = 'SMOD'.
    wf_object2 = 'Enhancement' .
    elseif wa_tadir-object = 'SXSD'.
    wf_object2 = ' Business Add-in'.
    endif.
    FORMAT COLOR COL_GROUP INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
    2 wf_object2,
    105 SY-VLINE.
    endat.
    case wa_tadir-object.
    when 'SMOD'.
    wf_smod = wf_smod + 1.
    SELECT SINGLE MODTEXT into wf_txt
    FROM MODSAPT
    WHERE SPRSL = SY-LANGU
    AND NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    when 'SXSD'.
    *For BADis
    wf_badi = wf_badi + 1 .
    select single TEXT into wf_txt
    from SXS_ATTRT
    where sprsl = sy-langu
    and EXIT_NAME = wa_tadir-OBJ_NAME.
    FORMAT COLOR COL_NORMAL INTENSIFIED ON.
    endcase.
    WRITE:/1 SY-VLINE,
    2 wa_tadir-OBJ_NAME hotspot on,
    41 SY-VLINE ,
    42 wf_txt,
    105 SY-VLINE.
    AT END OF object.
    write : /(105) sy-ULINE.
    ENDAT.
    ENDLOOP.
    WRITE:/(105) SY-ULINE.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No.of Exits:' , wf_smod.
    WRITE:/ 'No.of BADis:' , wf_badi.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'No userexits or BADis exist'.
    ENDIF.
    ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(105) 'Transaction does not exist'.
    ENDIF.
    AT LINE-SELECTION.
    data : wf_object type tadir-object.
    clear wf_object.
    GET CURSOR FIELD FIELD1.
    CHECK FIELD1(8) EQ 'WA_TADIR'.
    read table jtab with key obj_name = sy-lisel+1(20).
    move jtab-object to wf_object.
    case wf_object.
    when 'SMOD'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
    when 'SXSD'.
    SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
    CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
    endcase.
    Regards
    Vinayak

  • How to identify the maximum data loads done for a particular day?

    Hi all,
    There is huge volume of data been loaded on a last monday, and then data was deleted from the cubes on the same day. And hence i needs to see which are all the cubes which was loaded wtih lot of records for a particular day,
    i happened to look at rsmo, i am unable to see the ods nor the cube data loads,
    were do i seet it?
    Thanks

    See if the table RSSELDONE helps. This will give you the recent data load details. Based on those loads , you can search the targets.
    And also check table TBTCO  which will give the latest job details. You will have to analyze the same jobs to know what loads were done . Give a selection for date.

  • Vendor Balance on a particular Day

    Hi Guys,
    I need to get the vendor balance on a particular day.
    I need to develop a new report for calculating the vendor balances on a particular day.
    How can i do this using BSIK and BSAK table. What logic can be used to calculate the balance for a particular vendor.
    I need to give the specs to the ABAPer.
    Pls advise.
    Thanks
    srik.

    Hi,
    If you want vendor balance on a particular day.
    Refer Table BSIS and BSAK and select field LIFNR and combine the vendor from BSAK and BSIK.
    And take the total as of Posting date or Document Date ( BUDAT or BLDAT).
    Along with Clearing date ( AUGDT) and Clearing Document(AUGBL) from BSAK table to differentitate the Open item and Cleared item.
    And sum up the total based on posting Date.
    Regards,
    Hemanth.

Maybe you are looking for