How do I print PDF files in preview with the added annotations?
Is there a way to print out the document with the added notes that are next to the slides?
When you add notations to a PDF document, you need to hit "save" for every page before doing anything else. If you forget to save the changes for each page, they will not re-appear. So, if you save the change, it should then print with your notations.
Similar Messages
-
How do I save PDF files by default to the folder of the source file?
How do I save PDF files by default to the folder of the source file with Acrobat 9.0.0 Standard?
I am not seeing that behaviour. If I right-click a link to a .pdf file, I get the file saved with the original filename.
Maybe one of the settings in about:config controls that?
pdfjs.previousHandler.preferredAction is a setting that has a value of 4 with my setup. I have no idea what that means, and I could not find any explanation anywhere. You could try using different numbers for that value and see if any make any difference. Why has nobody bothered to explain that setting anywhere? -
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi 43 KB
Read PDF file.jpg 201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi 42 KBhi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
how can I convert .pdf file to .doc using the free adobe reader app? when I try to convert the .pdf file it asks me to sign in. when I click on "sign in", I am taken to a service subscription page. So, no free conversions using free adobe reader app?
As has been mentioned Adobe Reader cannot export PDF page content. Nor can it create PDF or manipulate PDF page content.
What you can do is use one of Adobe's online subscription services. Two provide for PDF to Word export.
There's ExportPDF and PDF Pack.
Be well... -
Can not print PDF file at all with Windows Vista
I have Acrobat Reader 9.3.2. I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440). I am unable to print pdf files. About a week ago, we had problems with our printer printing anything. I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one. I am unsure what specific "updates" I ran while trying to figure out printers issue. When in Reader, everything seems normal. When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens. I know that I am connected to printer due to all other programs can print. I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem. I have gone thru all the other help steps to try to resolve the situation: it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc. I am not getting any error message, so am unsure what is wrong. It just will not print. Is there anyone that could give me some suggestions that I have not tried? I would REALLY appreciate it! Thanks!
Another user experience exactly the same issue with vista and printing from Adobe reader.
http://forums.adobe.com/thread/642000?tstart=1 Its copied below as a reference.
The problem was on my Auntys PC, and yes i did updated Adobe Reader to v9.3.2 and still the same issue underlned below.
My Aunty lives 70 miles away so will not be trying anything else.
The printer works fine with every other application only Adobe Reader files will print.
May 19, 2010 7:31 AM
Can not print PDF file at all with Windows Vista
I have Acrobat Reader 9.3.2. I am working off of Windows Vista on my laptop to a network wireless printer (Brother MFC 9440). I am unable to print pdf files. About a week ago, we had problems with our printer printing anything. I had to uninstall it and reinstalled it and it now works fine except the pdf files. I have had no problems printing any other files on any other programs but this one. I am unsure what specific "updates" I ran while trying to figure out printers issue. When in Reader, everything seems normal. When I hit print, the printer box pops up as normal and then I hit ok, my printer icon at bottom pops up for about 5 secs and nothing happens. I know that I am connected to printer due to all other programs can print. I do not have access to another printer to see if pdf will print on another printer, but do know that the other two computers used in this office (mac laptop and mac desktop) both are able to print pdf files to this printer without a problem. I have gone thru all the other help steps to try to resolve the situation: it still will not print when I hit "print as image", made sure that my printer is marked as network and is default printer, made sure to check that I have all upgrades, etc. I am not getting any error message, so am unsure what is wrong. It just will not print. Is there anyone that could give me some suggestions that I have not tried? I would REALLY appreciate it! Thanks! -
How to directly print PDF file(which is stored in SAP) in ABAP report?
Hi experts,
I searched SDN for printing PDF file but everything is about OTF to PDF and to use fm: CONVERT_OTF which is not the solution for my problem.
I have to build ABAP report which will take the PDF file attached to SAP document (CV02N) and print it.So, which function module or program can I use to print the PDF file?
Thank you very much.
Kind regards,
DanijelaDear
this is the code for down load smartform for PDF format. its working properly
2nd way is
set your Acrobat Printer as your default printer
when you print select printer as LOCAL
then you will file dialog box for Naming PDF
DATA : T_OTF TYPE ITCOO OCCURS 0 WITH HEADER LINE.
DATA : WA_CTRLOP TYPE SSFCTRLOP.
DATA : WA_OUTOPT TYPE SSFCOMPOP.
DATA : T_OTFDATA TYPE SSFCRESCL.
DATA : T_PDF_TAB LIKE TLINE OCCURS 0 WITH HEADER LINE.
DATA : V_FILESIZE TYPE I.
DATA : W_BIN_SIZE TYPE I.
WA_CTRLOP-GETOTF = 'X'.
WA_CTRLOP-NO_DIALOG = 'X'.
WA_OUTOPT-TDNOPREV = 'X'.
CALL FUNCTION P_LV_FNAME
EXPORTING
OUTPUT_OPTIONS = WA_OUTOPT
USER_SETTINGS = 'X'
CONTROL_PARAMETERS = WA_CTRLOP
IMPORTING
JOB_OUTPUT_INFO = T_OTFDATA
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
T_OTF[] = T_OTFDATA-OTFDATA[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
IMPORTING
BIN_FILESIZE = W_BIN_SIZE
TABLES
OTF = T_OTF
LINES = T_PDF_TAB
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
OTHERS = 4.
DATA : LV_DOWN_FILE TYPE RLGRAP-FILENAME.
DATA : LV_TEXT TYPE STRING.
CASE SSCRFIELDS-UCOMM.
WHEN 'REPRUNMOLD'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Run_Moulds\' SY-DATUM '-' SY-TIMLO '-' 'Running Mould' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
WHEN 'REPLINESIT'.
CONCATENATE '(' SO_SCHDT-LOW '-' SO_PLANT-LOW '-' SO_LINE2-LOW ')' INTO LV_TEXT.
CONCATENATE '\\lkdb01\FTP-Loadstar\0.PP_Planning\ZPP014\Line_Situation\' SY-DATUM '-' SY-TIMLO '-' 'Line Situation' '-' LV_TEXT '.pdf' INTO LV_DOWN_FILE SEPARATED BY SPACE.
ENDCASE.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_BIN_SIZE
FILENAME = LV_DOWN_FILE
FILETYPE = 'BIN'
IMPORTING
FILELENGTH = V_FILESIZE
TABLES
DATA_TAB = T_PDF_TAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE 'File not downloaded succesfully' TYPE 'I'.
EXIT.
ELSE.
MESSAGE 'PDF File downloaded succesfully' TYPE 'I'.
ENDIF.
ENDFORM. " Print_PDF
Rewards if useful. -
It seems that the tool to create an hyperlink on a pdf file is removed from the toolbar!
In order to initiate printing by clicking a button, the button has to have either an "execute menu item" type action or use the "print" JavaScript method. As you guessed, the former won't work since there are no menu items to execute, and the latter can only work if the particular PDF viewer you're using supports it. I'm not aware of any that do on iOS.
The button doesn't appear because you're probably opening it in the default PDF viewer, which doesn't support forms at all. If you were to open the form in Adobe Reader, you'd see the button but it wouldn't work. -
How do I change PDF files to JPEG on the Mac?
how do i change pdf files to jpeg? thanx
Open the pdf with preview then go to File/Save As then select jpeg as the file option.
-
Problem viewing and printing PDF files in Preview
I have a document that was created in Adobe InDesign (CS4) with a photo that was converted to Grayscale from a CMYK image in Photoshop (CS4).
That document was then Exported from InDesign as a high print quality PDF.
Now when I open the file in Preview the photo appears on the screen as a "Negative" or "Reversed" image. And if I print the document, it too prints as a "Negative/Reversed" image.
I don't know if this matters but if I send this document in Apple Mail it too previews as a "Negative/Reversed" image.
Other that this photo everything else in the document (text and color logos) displays and prints fine.
Any ideas?I have exactly the same problem with PDFs containing bitmaps created by Illustrator CS3 (and CS4) -- the bitmap appears as negative.
It has to do with the compression method used for the bitmaps in the Adobe PDF creation. If it is JPEG or JPEG2000 the problem occurs, if it's ZIP or no compression, the image is fine.
If have reported this to Apple as a bug already.
10.6.2 has NOT fixed this behaviour. -
How to duplex print pdf file on hp 1320 using upd pcl5 on windows 7 ?
I am running Windows 7 Professional (64bit), with a HP laserjet 1320 using driver HP UPD PCL5 (v5.5.0.12834), with Adobe Acrobat 9 Pro v9.5.2 and MS Word 2010. When I print a Word 2010 file I can choose duplex printing (print on both sides) and everything works fine. However, when I open a PDF file, click FILE then PRINT then PROPERTIES the PRINT ON BOTH SIDES option shows "none" and no other option is shown. I searched Adobe support and it says duplex printing is controlled by the printer driver, not Adobe software. I have uninstalled & reinstalled the UPD PCL 5 driver two times already but still the same problem of not being able to choose duplex printing for any PDF document - yet it works for MS Word. Any ideas ? Thanks
How do I duplex print on an HP 1320 printer that uses windows 7 (64 bit) system?
-
How can I print to file (simple output) from the print dialog? Not PDF or PostScript
Hello
I do quite a bit of work in virtual terminal (SSH) and I tend to pull enormous amounts of data that need to be saved to a *.txt file. This needs to have ZERO formatting, as it is simply data extracted from a data base (CSV, tab delimited, etc). This information is then formatting through the use of other applications (excel, access, etc). By zero formatting i mean, no text wrap, nothing! It needs to be a text based pure database output.
I cannot use Print to PDF
I cannot use Print to PostScript
both of these include formatting, and erroneous data that would require me many hours to clean up the data by hand. On a Windows based PC you can simply install a "Print to File" printer through your printer setup menu.
I've spent many hours searching online and other seem to need this same exact type of output.
The closest thing i've been able to do is create an automator file that upon printing converts the PDF into a text file. This doesn't work as it retains the formatting per the original PDF document. This also doesn't seem to help as some outputs are 30mb in size.
If anybody could assist with this that would be awesome. Thanks!It looks as though you need a netgear router to use this and we have a btinternet router so it won't work
The word is that this suggestion will work with any router.
I did not see the brother printer listed.
List of supported AirPrinters.
http://support.apple.com/kb/HT4356
printing to a non-airprinter from an iPad
To print from the iPad, your going to have to install some more software:
-- install a printer app on the ipad. many printer makers have iPad applications for their printers. Look in the app store
-- install enabling software on a computer which you have connected the printer
For a comprehensive list of links, see Texas Mac Man list:
https://discussions.apple.com/message/21291967#21291967
iPad Print Applications supplied by printer manufactures -- usually free:
Brother iPrint&Scan
http://itunes.apple.com/us/app/brother-iprint-scan/id382775642
Helper app -- /print n share
Print directly to the widest range of network or WiFi printers available in any app. Alternatively print via your computer to ALL printers including USB & Bluetooth printers. View read and display large PDF, Office & iWork files. Easily transfer & store files from the Cloud or your computer.
https://itunes.apple.com/us/app/print-n-share/id301656026?mt=8
Software for your computer's printer:
Mac and Windows
FingerPrint
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/ -
New iMac, can't get Lexmark printer to print pdf files. Is it the driver?
just purchased my first iMac. trying to get pdf files to print-- not working. Other docs will print. Is it the printer driver? The printer is a Lexmark
Might be a driver update available from the Lexmark site for Lion v10.7
-
Can't print PDF's from preview with os x v10.7 lion
Hi. Ever since I installed Lion Im having a hard time printing PDF's from the preview menue. All I get is the pinwheel?
Are you using a Canon printer? If so:
https://discussions.apple.com/message/15748239#15748239
https://discussions.apple.com/thread/3216206?tstart=0
If not, can you provide more details please and post the log of the hang?
Hope this helps. -
I want to print information at the back of small envelope how do I set the envelop up to print?
Hi @RCCG_Power,
Welcome to the HP Forums!
I understand that you are wondering how to print envelopes with your HP Officejet J4680. I am happy to look into this for you!
Some questions for starters:
What is the size/type/weight of the envelope you are using?
What Operating System are you using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos.
Please, take a look through this guide, 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing, select your Operating System, then printing envelopes.
For future reference, here is your printer's user guide.
Hope this is helpful!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
I purchased a PDF Pack last November and I'm having a problem with combining multiple pages into a single PDF file. Please let me know why this is otherwise I would like to cancel the subscription
Hi aspenavenue,
I've checked your account, and there are no issues there. What happens when you try to combine files? Do you get an error message? I would love to help, if possible.
Best,
Sara
Maybe you are looking for
-
CS5.5 I can't get testing server, "design" and "Split" views operational
I just upgraded from DWCS3 to DWCS5.5 and am trying to get php (dynamically related) files working. Very frustrating. I have set up everything according to the tutorial at http://www.adobe.com/devnet/dreamweaver/articles/setup_testing_server.html Not
-
How to increase disk size in solaris
Hi all I have two disk c1t0d0s0 / c1t0d0s7 I do haven't space in disk /dev/dsk/c1t0d0s0 run df -h /dev/dsk/*c1t0d0s0* 8,8G 7,4G 1,3G 86% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/
-
2007 Meeting Workspace move via content and structure not working
We are trying to move several meeting workspaces from a 5th level sub-site to a 2nd level site within the same site collection. We know regular sites at the same or different level can be moved, but for some reason the meeting workspaces won't move.
-
How to use JNDI in an eWay?
Currently this project is using an Oracle eWay for database communication. However, it is necessary to specify the database URL, user, and password. This is fine as long as these properties won't change, but they are different in each environment (de
-
Here is the update statment : but i am getting an error: GTABLES.BILLTYPe_LOOKUPNEW.BILL_TEMPALTE_TYPE_NUM:invalid identifier.. update gtables.bill_template_type set bill_template_type_desc = ( select new_name from gtables.billtype_lookupnew where gt