How do I print to a certain tray, using the eprint service of the HP Color LaserJet CM4540 MFP

Greetings,
I am using the excellent eprint service, and I need to specify which tray should be used. Is this possible ?
tychomoon
This question was solved.
View Solution.

Hi tychomoon,
You cannot set a different tray for the ePrint service individualy,
However, you may set a default tray for the product, which will be used for ePrint as well.
"You can only change the paper tray settings from the HP product control panel."
(Source: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...)
You may find how to select the tray below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=...
Either the Default Job Options or the Paper Selection configuration should be applicable for this need.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Printing to a HP Color Laserjet CM4540 MFP from new iPad.

I am trying to print from my new iPad to my HP Color Laserjet CM4540 MFP.
When I try to print the iPad gives me the option to choose my printer. It currently only recognizes one printer- not the CM4540. It recognized the other printer without any problems or setup by myself.
I'm assuming b/c the CM4540 is not supported to print from the iPad this is why I'm having trouble.
Can someone confirm my assumption please? Or- let me know how to connect to the CM4540 to print?
Thanks!!

Hi there,
You may find the information in the article below helpful.
AirPrint Basics
http://support.apple.com/kb/HT4356
-Griff W.

How can i print from my iphone 5s using the 6500a

i have a officejet 6500a and a iphone 5s- how can i print from the iphone and still be able to printfrom usb/ pc
do i have to by a adaptor- add software or both- will this printer do both- thanks

Hi,
It's not an Airprint printer as shown:
http://support.apple.com/kb/ht4356
Therefor please check my other reply to connect it to your home network and use the follwing app to print.
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I print from my Nexus 7 using the HP Officejet 100 Mobile Printer?

Can the HP Officejet 100 Mobile Printer print from a Nexus 7 which has bluetooth? \ Lswanston9 - Need assistance ASAP, I am a Dual Major College Student, viz., Paralegal Technology & Community Spanish Interpreter|

Hi,
Please try this:
https://play.google.com/store/apps/details?id=com.hp.android.print&hl=en
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Color LaserJet Pro MFP M177fw How to Scan

I just bout the HP Color LaserJet Pro MFP M177fw printer today and don't know how to use the scanner. I use Windows 8 operating system. Please advise how to use th scanner function. Thanks.

Hi, From page #38 of the manual: Scan by using the HP Scan software (Windows)
Use the HP Scan software to initiate scanning from software on your computer. You can save the scanned image as a file or send it to another software application.
1. Load the document on the scanner glass according to the indicators on the product.
NOTE: For best results, load small-size paper (Letter, A4, or smaller) with the long edge of the paper along the left side of the scanner glass.
2. Click Start, and then click Programs (or All Programs in Windows XP).
3. Click HP, and then select your product.
4. Click HP Scan, select a scanning shortcut, and then adjust the settings if necessary.
5. Click Scan.
NOTE: Click Advanced Settings to gain access to more options.
Click Create New Shortcut to create a customized set of settings and save it in the list of shortcuts. Regards.

Select the printer tray using the Java Print Service with JDK 1.4.2

Hello,
I have got a problem with 1.4 Printing. I would like to specify the printer tray for printing on Windows platform (XP and NT4.0). I am trying to use the attribute javax.print.attribute.standard.MediaTray class (ex. MediaTray.BOTTOM).
Howerver, I can control the printer tray if I use the PCL driver of the printer. If I user the postscript driver I am not able to control the printer tray. I can reproduce the problem with 3 different printers (HP, Lexmark and Nashuatec).
I used the getSupportedAttributeValues to check the supported values of the Media
Media med[] = (Media[])service.getSupportedAttributeValues(Media.class, null, null);
for (int k=0; k<med.length; k++) {
System.out.println("Name : " + med[k].getClass() + " - Value : " + med[k].getValue());
With the PCL driver I have the following output and I can control the printer tray.
Name : class javax.print.attribute.standard.MediaTray - Value : 0
Name : class javax.print.attribute.standard.MediaTray - Value : 2
Name : class javax.print.attribute.standard.MediaTray - Value : 4
Name : class sun.print.Win32MediaTray - Value : 0
Name : class sun.print.Win32MediaTray - Value : 1
With the postscript driver I have the following output and I cannot control the printer tray
Name : class sun.print.Win32MediaTray - Value : 5
Name : class sun.print.Win32MediaTray - Value : 6
Name : class sun.print.Win32MediaTray - Value : 7
Name : class sun.print.Win32MediaTray - Value : 8
Name : class sun.print.Win32MediaTray - Value : 9
As I must use the postscript printer, can someone help me?
Thanks.

Hello,
Can you tell me how it's possible to selet the tray using the PCL?
I print on the following way:
PrintService[] services = PrintServiceLookup.lookupPrintServices(null, null);
AttributeSet aset = new HashAttributeSet();
aset.add(new PrinterName("\\\\107208\\SBE08111", null)); // select printer
......Now I tried to add your code and I get the following output:
0: Name : class javax.print.attribute.standard.MediaSizeName - Value : 40
1: Name : class javax.print.attribute.standard.MediaSizeName - Value : 41
2: Name : class javax.print.attribute.standard.MediaSizeName - Value : 45
3: Name : class javax.print.attribute.standard.MediaSizeName - Value : 42
4: Name : class javax.print.attribute.standard.MediaSizeName - Value : 4
5: Name : class javax.print.attribute.standard.MediaSizeName - Value : 5
6: Name : class javax.print.attribute.standard.MediaSizeName - Value : 27
7: Name : class javax.print.attribute.standard.MediaSizeName - Value : 46
8: Name : class javax.print.attribute.standard.MediaSizeName - Value : 59
9: Name : class javax.print.attribute.standard.MediaSizeName - Value : 60
10: Name : class javax.print.attribute.standard.MediaSizeName - Value : 55
11: Name : class javax.print.attribute.standard.MediaSizeName - Value : 38
12: Name : class javax.print.attribute.standard.MediaSizeName - Value : 16
13: Name : class javax.print.attribute.standard.MediaSizeName - Value : 57
14: Name : class javax.print.attribute.standard.MediaTray - Value : 0
15: Name : class javax.print.attribute.standard.MediaTray - Value : 2
16: Name : class javax.print.attribute.standard.MediaTray - Value : 1
17: Name : class javax.print.attribute.standard.MediaTray - Value : 6
18: Name : class javax.print.attribute.standard.MediaTray - Value : 4
19: Name : class sun.print.Win32MediaTray - Value : 0
20: Name : class sun.print.Win32MediaTray - Value : 1
It's a printer with to trays, so I suppose the last two lines are important, but I'm not possible to effectively select the tray I want to print..

How do I get to a certain playlist on the shuffle?

How do I get to a certain playlist on the shuffle?

Hey there lauramit,
If I understand correctly you want to be able to select different playlists on your iPod Shuffle. The following article will help you be able to do that with the Voice Over option:
iPod shuffle (4th generation): Enabling and using VoiceOver
To enable VoiceOver when you set up iPod shuffle
Connect iPod shuffle to your computer.
Follow the onscreen instructions in iTunes. "Enable VoiceOver" is selected by default.
Click Continue.
In the Summary button, under Voice Feedback, choose the language you want from the Language menu. This sets the language for your spoken system messages and playlist names, as well as many of the song titles and artist names.
Click Apply. When setup is complete, VoiceOver is enabled on iPod shuffle.
To choose an item from the playlist menu
Press and hold the VoiceOver button. You hear the names of your playlists.
When you hear the name of the playlist you want, press the VoiceOver button or Play/Pause to select it. The first item in your playlist plays. When you're listening to the playlist menu, you can press Next/Fast-forward or Previous/Rewind to move forward or backward in the playlist menu.
To restart a playlist, follow these steps to select the playlist you want.
Thank you for using Apple Support Communities.
Cheers,
Sterling

How do you print an email attachment and not the email itself. please.

how do you print an email attachment and not the email itself. please.
This question was solved.
View Solution.

Hi there, if there is text in the body of the email it will print automatically when sent to an ePrint email address. The only way to just have the attachment print is for there to be no text in the email body.
Hope that helps answer your question.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

I have windows for apple power point, how can i print a 6 slide handout using ALL the paper?

I have windows for apple power point, how can i print a 6 slide handout using ALL the paper?
The slides come out SO small and there is so much paper not used!

Ah - OK. Ahora entiendo. Estás en el foro incorrecto. Aquí tratamos sólo con los productos de Apple, y tu pregunta es sobre un producto de Microsoft.
Tendrás más suerte en el foro de PowerPoint en el sitio de Microsoft:
http://answers.microsoft.com/en-us/mac/forum/macpowerpoint
¡Suerte!
M.

How to print from iphone to hp color laserjet CM1017 MFP printer

How to print from iphone to hp color laserjet CM1017 MFP printer

In order to AirPrint from your iPad/iPhone, here's all you need to do:
1. Make sure the printer and iPad/iPhone are connected to the same local network.
2. Open something you want to print (on the iPad/iPhone).
3. On the iPad/iPhone, tap the "Action" button (arrow curving out of a box).
4. Tap "Print".
If you have any issues with printing, below are some steps that should help you out!
1. Power off the printer.
2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
3. Power the printer back on.
4. Power the iOS devices back on.
5. Try to print again.
Those steps usually resolve the issue. If they do not, try this additional steps:
6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How do I print from my iPad mini using Epson imprint app.

How do print from my iPad using my iPad mini.

Re: How do I print from my iPad mini using Epson iprint app.

I have an Ipad and about to buy a macpro. My husband has a PC with a printer attached. Can I use the same printer or do I need to buy my own?

I have an Ipad and about to buy a Macpro. My husband has a PC with XP operating system with a printer/scanner. Do I need to buy my own printer or can we both use the same printer?

It depends. The Mac Pro may come with Lion, or at least 10.6.8, and some printers are no longer supported (Windows 7 either).
Also, you have to download drivers, sometimes from vendor. Sometimes apple has some thru software update, but not always.
without knowing printer make/model it is next to impossible to say for certain one way or another. If you do buy new printer, you can walk away with more power in injet, laser, and scanners to make it worthwhile. I had to update all of those when support was dropped. amazing how much faster and better the new models are, and for much less.
Though I would focus on Mac Pro -
Mac Performance Guide Reviews
Apple Downloads
RoaringApps Mac OS X Lion Application Compatibility
Lion App Compatibility Table - RoaringApps

How to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?

hello,
i try few different way but still don't know how to scan things.
anyone know how to scan on Mac OS10.10.2 by HP Color LaserJet Pro MFP M177fw?
it have no problem on printing by wifi.
thanks,
Les

Hi Les,
Follow these steps to scan with the HP Scan software:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
If you do not have the HP Scan Software located as the socument states, download and install the following software.
Be sure to seect HP Scan while installing the software:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-124923-3&cc=us&dlc=en&lc=en...
Additionally you may scan with Apple's software by following these steps instead:
http://support.hp.com/us-en/product/HP-Color-LaserJet-Pro-M170-Multifunction-Printer-series/5303438/...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

Just installed a HP Color Laserjet CM2320nf MFP printer, at the same time I upgraded to Lion. It prints fine, but I cannot use the scan functions. I downloaded the most recent driver! Any help would be appreciated.

HP says that the drivers for your all in one print/scanner are downloadable from apple. For the scanner to use preview. image capture or the scan icon from the print driver queue. I don't know how old your HP is, but I know that the newer Os from apple don't support a lot of older printers. You might be able find a third party driver that could work.

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

How do I print to a certain tray, using the eprint service of the HP Color LaserJet CM4540 MFP

Similar Messages

Maybe you are looking for