How do I proceed with installation of PE_13 7z from a downloaded and saved file?
I downloaded and saved PhotoshopElements_13_LS25_wind64.7z file using the provided dowload manager.
The download manager did not provide instructions to install the software.
What is my next step?
RH
It seems you have a zip file do you have a unzip file as well ?
Similar Messages
-
Problem with parameters to fix opening of old tabs and saving files when a new session is open
Hello,
Since 2 weeks I have a problem: I always fix my parameters to restore previous session with all my tabs and I choose that Firefox asks me where I want to save my downloaded files. Now each time I close Firefox and I reopen it, it is not taken into account, and 3 tabs are opened: Firefox, Google and Thank to install Zotero! I rechange it, but every time it opens these tabs and not my old tabs. The same for saving files. It goes back automatically to open start page and to save my file in Downloads. Even if I rechange, it comes back the same.
I desinstalled CCleaner (I thought it could be that) but nothing changes!
Please help. Thank you very much!
MarthaHere's what I would try:
*Reset Firefox - this should fix the issue but it will change settings like where files are downloaded and what tabs open at startup back to their defaults.
*Then change your download and session restore preferences back to how you like them.
Here's how:
#Go to Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
#Open the options window - Tools > Options > General
#In the General panel set Firefox to open your tabs from last time and set Firefox to ask you where to save downloads.
#Click OK
That should do it. Let me know if this worked.
Thanks,<br>
Michael -
I am trying to install firefox and l can't get pass setup type on the type of setup whih is standard and then it tells me to close firefox so it can proceed with installation, when l do, it ask me do l want to cancel installation, if l say no then it tells me again to close firefox.
I want to make sure you're using the auto-update system, because that's the safest most reliable way to go, and it shouldn't appear in the download manager, so I lets make sure you're doing it right. <br/>
This is a screencast I made a couple of years ago. It refers to 3.5 and 3.6, but the steps are still the same: http://ilias.ca/screencasts/ISUHD45.mov
If that doesn't work, then maybe your Snow Leopard account doesn't have permission to update applications? -
How Shall I Proceed with the implementation?
Hi all,
Its a bit urgent... plz respond quickly.
I m facing a prob to understand how shall i proceed with implementation of master data. I hv a single ecc6 with two clients. client xxx is assigned to xxxx company code and client yyy is assigned to yyyy company code. single ecc maintained for two companies.
Now
1) i dont understand how shall i load master data under this situation?
2) What changed need to be done for datasources in ecc?
3) Again some of the data is common between company codes. How to achieve that?
Experts please help me to start with this.
Thanks & Regards,
Kush
Edited by: Kushal Prajapati on Apr 11, 2008 11:29 AMIcone to launch phothshop I am sorry but I don't understand your question. Can you please restate it?
-
How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell -
140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and moneyApple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you. -
How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated
FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap. -
Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank youPages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry -
How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?
Did you change the ID you are using for iCoud? If so, did you delete the account, then sign back in with your new ID on your device?
-
I purchased a new camera with an Adobe Photoshop Lightroom 5 disk. I have a windows pc with windows 8.1. I have downloaded and removed about 5 times. It says installed correctly but every time i hit the icon the pc freezes and I have to reboot HELP
uninstall your lr 5.
install lr 5.7.1 and use your serial number to activate.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Problem occurring when opening and saving files in AI SC5 with Windows 7
Hi, I ‘am a Graphic Designer and first time working in UAE Windows 7 is basically the only OS here. My PC is:
HP Elite 7000
Intel® Core™ i5 CPU 2.67GHz
4GB RAM
32-bit
Now to the problem, not that knowledgeable in IT stuff so here goes:
1. Problem occurring when opening and saving files in AI SC5 with Windows 7. (You will actually see a “Not Responding” word coming out while opening and saving files, whether small or large files)
2. Locked layers occasionally are moved accidentally.(Working on multiple layers is normal so we need to lock it specially the once on top. But there are times I still manage to select locked layers)
3. After typing and locking the text, pressing “V” for the arrow key shortcut is still added to the text that is locked. (After typing I lock the text layer with my mouse and Press “V” to activate the arrow key… yes the arrow key is activated but the text is still typing the actual keyboard pressed)
I’ve only use the brand new PC and installer for a month now. Not sure if this is compatibility issues or something else I’m not aware of.
Thanks in advance to people that will reply.
Cheers!!!Well I’m still wondering if it is compatibility issues because I’m also having problem with Photoshop CS5. These 3 are all bought at the same time (PC, Illustrator and Photoshop installers). The problem I’m having in Photoshop is not that too important, every time I Ctrl+O to view files, all PSD are shown in white paper like icons, no preview, and saving as well.
Or I just purchased a corrupted or pirated installers… Adobe updates are done every time I’m prompted. -
How do I stop spotlight from returning .r and .h files
how do I stop spotlight from returning .r and .h files?
Hello jtenny,
Welcome to the Discussions.
I had a similar problem with Safari opening .pdf files. It went away when I went into the following folder: Your Home Folder/Library/Internet Plug-ins, and dragged out any files that looked as if they might make a difference, just one at a time, onto the Desktop. (N.B. I did not Trash them; and if removal made no difference, I replaced the file into the Plug-ins folder.) You will have to restart Safari on each occasion; and on a couple of occasions I found that re-setting Safari (Safari Menu) was necessary to give the application a start-from-scratch with each download attempt.
That's a somewhat makeshift way of approaching it; but provided you don't trash the plugins, and provided you restore those that make no difference, it can't do any harm -- within my experience anyway.
All good wishes from Ireland
Martin
If you found that this contribution helped to answer your question, please consider awarding some points. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8) Several veterans that go on and on. 40gig, 3rd generation iPod -
I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.
Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action. -
Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????
It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this. -
How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class? These are the keys,values: TreeMap The data I'd like to Cache is (date from the file, time of the file, current time).
import java.io.*;
public class CacheData {
public static void main(String[] args) throws IOException {
String target_dir = "C:\\Files";
String output = "C:\\Files\output.txt";
File dir = new File(target_dir);
File[] files = dir.listFiles();
// open the Printwriter before your loop
PrintWriter outputStream = new PrintWriter(output);
for (File textfiles : files) {
if (textfiles.isFile() && textfiles.getName().endsWith(".txt")) {
BufferedReader inputStream = null;
// close the outputstream after the loop
outputStream.close();
try {
inputStream = new BufferedReader(new FileReader(textfiles));
String line;
while ((line = inputStream.readLine()) != null) {
System.out.println(line);
// Write Content
outputStream.println(line);
} finally {
if (inputStream != null) {
inputStream.close();How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class?
I don't understand your question.
If you don't know how to use TreeMap why do you think a TreeMap is the correct solution for what you want to do?
If you are just asking how to use TreeMap then there are PLENTY of tutorials on the internet and the Java API provides the methods that area available.
TreeMap (Java Platform SE 7 )
Are you sure you want a map and not a tree instead?
https://docs.oracle.com/javase/tutorial/uiswing/components/tree.html
Maybe you are looking for
-
I had a purchase show up that wasn't mine or something I ordered.
-
I am furious....I dont want to optimize my browser for Yahoo.....and when I started my computer this morning, it started in Firefox without asking me, without my Walnut add on, and no tabs, of which I had many.....now I have the walnut add on, but am
-
Hi All, While sending an 850 document to supplier, I am getting below error, Could any one give some idea how to resolve this. Regards Machine Info: (usmtnz-dinfwi12.dev.emrsn.org) Description: General failure creating S/MIME digital signature StackT
-
I am creating a ecommerce manager and I am having some problems with the options part of the site. I allow for 5 options to be set. Each option can be populated using its own CFGRID (this is a Flash Form). When you insert into a grid, if the grid has
-
Af:showPrintablePageBehavior inside af:popup - af:dialog
Is there a standard way to get the showPrintablePageBehavior command working inside a popup? Ive placing layout components like panelsplitters and panelgrouplayouts inside the popup (in the hopes that the showPrintablePageBehavior would recognize the