How do I process Fuji XE2 raf files in lightroom 4.4

New to Fuji cameras! Love the camera, now I need to know how to get Lightroom 4.4 to preview and process my XE2 raf files. My issue starts with a message 'can not preview image' and the raw raf files do not come up at all. Ideas?

Where did you see this false information--about LR 4.4 supporting the X-E2?
LR 4.4.1 was released June 2013.
The X-E2 was announced October 2013, some months after, LR 4.4.1.
Adobe's raw conversion software needs specific information for each camera, to support raws from that camera. Adobe needs a production-ready camera in hand to determine this information so there's no way LR 4.4.1 would already have information from a camera not announced until some months later, and available for sale even later.
If you have simple software that supports the camera, either it is newer, or it is merely reading the embedded JPG preview and not interpreting the raw data.
The DNG Converter 8.3 or newer should work fine to create DNGs from the camera's native raw files; however, when you specify the source, the usual confusion is that you are selecting a FOLDER and you won't see any image files listed.

Similar Messages

How do I import iPhoto raw (NEF) files into Lightroom 3.6?

how do I import iPhoto raw (NEF) files into Lightroom 3.6?

You will need an application that can convert those pcd files into one that iPhoto supports, mainly jpeg. GraphicConverter is supposed to support many, many formats and might just support the pcd. If so you could use it to convert them to jpegs.
There's an automator workflow that I've put into an application that will take many image files and convert them into jpeg with the RGB color profile. I've never tried it on the Kodak files but you can give it a try. It's called +*Convert to JPG and Embed sRGB profile*+ and can be downloaded from Toad's Cellar. Make a copy of a couple of files and see if it will work. If so then you can batch convert folders of the files at once by dragging them onto the application.
I believe GC can do batch conversions but am not familiar with the application.

Fuji S3Pro: RAF Files

I have a Fuji S3Pro and have found that it doesn't support RAF. I should have checked the Web. Dumb. Now I will wait unless someone knows that RAF files are supported.

I have a Fuji S3Pro and have found that it doesn't
support RAF. I should have checked the Web. Dumb. Now
I will wait unless someone knows that RAF files are
supported.
Are you sure that .RAF files aren't supported? I'm pretty sure that iPhoto supports .RAF as does Mac OS 10.4.3.
On this Apple webpage - http://www.apple.com/macosx/upgrade/cameras.html
Most Fuji FinePix cameras are supported, this includes the S1 & S2 which both produce .RAF files
To my knowledge, that means Aperture should support .RAF files.
PowerMac G4 400mhz Mac OS X (10.4.3)

How do I import Fujifilm X T ! RAF files into Lightroom?

Fujifilm XT1

This is crazy. Why haven't Adobe addressed the camera RAW update in an update for LR 4 users? I'm really starting to hate Adobe as a company these days. Forcing users to update to version 5 when v4 is perfectly good, just so people will subscribe to the bs CC services is outrageous! It seems that one is either heavily discouraged from downloading a stand alone version of LR 5 on the Adobe site, or it's just not available at all, unless you go to Amazon and such.. I'm already looking for alternatives to LR at this point, based on principle alone. I mean, I'm not a paranoid person when it comes to cloud based anything, but it's just not worth the effort to spend $100 a damned year when it's not my profession and I'm not making money from photography. Why all of a sudden is a stand alone version so threatening to the LR business model? Hell, if you're going to charge as such, I want to see better cloning tools such as those found in freegin' Elements or PS, like content aware capabilities. If you're forcing people to spend money, then take that cash and dump it into your devs hands for better tools for ferk's sake!
As an X-T1 owner, I've already adapted the stand alone dng converter tool into my workflow, but it's the most tedious waste of time, ever! And from what I've seen with LR 5.4, the native RAW conversions for the RAF files look like absolute CRAP. So why even bother getting it for that reason? For years I was able to update my versions of LR for $99 at MY chosen time and convenience, and now that option seems to be gone, and would have to pay $135 over at Amazon if I want the stand alone version minus the CC nonsense. Honestly Adobe, I truly hope that another company comes along and whoops the hell out of LR. Which is entirely possible. PS, maybe not so much, but I can still hope. Maybe then you'll realize how arrogant and slimy your sales tactics have become.

How do I process Canon G15 Raw files in Photoshop CS5?

Hi - I have Photoshop CS5 and I'm having trouble processing Canon G15 Raw files. I downloaded the most recent Camera Raw converter but it didn't seem to wrong. I suspect I'm doing something wrong in the installation process. Thanks!!

The G15 needs Adobe Camera Raw version 7.3 or higher. Unfortunately CS5 can’t be updated beyond ACR 6.7. But it is possible to download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will open in CS5 (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7.1
Mac download (.dmg file) click here DNG Converter 8.7.1
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Fuji HS10 .RAF Files

Hello everyone,
Is there any news on when camera RAW will be able to deal with the .RAF files from the HS10???
I would really like to use the RAW setting on my camera and prepare them for PSE 8.

function(){return A.apply(null,[this].concat($A(arguments)))}
njkenyon wrote:
no preview in the import window!
Are your video drivers up to date?
-Noel

Cant import RAF files into lightroom 5.2

I've just purchased lightroom 5 and I'm having problems importing my files. I first detected the problem with my CR2 files.
After investigating I found this person with the exact same issue: http://forums.adobe.com/message/5474641 I managed to fix the problem by changing the prefrence file as indicated here: Preference and other file locations in Lightroom 5
Now I'm trying to import my RAF files (Fuji x100) and I'm getting the exact same issue.
What should I do now????

First of all, thanks for the help.
But I'm now more confused then before. I'll explain and I hope I wont confuse you in the process.
It seems that, without having changed the permissions, 5 pictures from my Fuji were able to import into the Sub-folder I want from the copys I made on my desktop. The rest didnt. I tried it again and it didnt work. I tried it yet another time except into a distinct sub folder of the same main folder. It worked. NOTE: both subfolders are on a external drive.
Then I tried to import new pictures directly from my SD card into both sub folder mentioned before. "Could not be read" message was given. So, I imported the images to my desktop with no problem but I can't move the files using LR into the subfolders on the external drive.
I'm very inclined to agree with you both that its a permission issue with the folders on the external drive. The back story is that I've had past two separte problems with my computers hard drive and RAM. Part of the fix for those issues was to creat new user accounts. The old ones have not been deleted. (dont know how)
I'm telling you this because, in the sharing and permission window, the sub folder I want all these pictures to go dosent give the same User name as the main folder or other folders within it.
Main Folder has the correct user account (Privilage set to read and write) Below is staff (which is I've changed to read and write) and below that Everyone (which I've left as read only)
Sub folder I wish pictures to go has and Old User name. Below is not staff but Fetching and privilage is set to read and write.
I hope I havent confused you too much. I cant wrap my head around the fact that 5 pics managed to enter the sub folder without it being set to the correct user.
Must be said that this sub folder is in my personal (not profesional) work, which I havent touched for a while now.
any questions??? cause I still have a tonn

How can I process an xml/xsl file pair that require the Internet Explorer dom?

My personal navigation device (GPS) generates xml files that contain a record of where I have been, together with when I was there, how fast I was driving at the time, etc. taken at approx. 5 second intervals. This xml file has an xml-stylesheet with type="text/xsl" but that stylesheet is written to the Internet Explorer dom standard. The stylesheet interfaces with google maps to display a map that shows my path and it also displays tables of data including distances that are computed from latitude/longitude pairs. I can supply a small sample xml file and the xsl file as well if they are needed to diagnose my problem. I cannot find any browser other than Internet Explorer that handles these files satisfactorily. I prefer to process them from a Linux environment but with the Internet Explorer requirement I cannot do so. The browsers that I have tried and that have failed are Firefox, Opera, Konqueror, Chrome, Epiphany, Midori, Arora, and Links.
One line in the xls file in particular gives grief in the browsers like Firefox that at least attempt to do more than display the raw xml file:
xmlns:cymath="urn:smiletime-cybarber-net:math"
A comment in the xls file says this about the problem:
"Tested and currently only compatible with Internet Explorer version 6 or version 7 (as this script includes JScript functions called by XSL, msxsl:script extension is required; also, the produced XHTML document embeds javascript functions exploiting the IE DOM).
"In order to provide compatibility with Firefox, other than checking the compatibility of the IE DOM, the cymath:distCosineLaw function still needs to be ported."

You may get an answer, but it is not really the sort of subject covered by this forum, I suggest you try [http://forums.mozillazine.org/viewforum.php?f=49 Mozilazine] and if you solve the problem post back again.

How do I import Fuji X-E2 files in Lr 5.3?

I'm using Lightroom 5.3, Camera Raw 8.3. Yesterday, I was able to import Fujifilm X-E2 files into Lr 5.3. But today (01.01.2014) I get the error message that the files cannot be read. Please help.

This usually means you do not have Write permission to the destination folder where the files are to be copied. Please check the permissions on that folder and if necessary change the permissions to write permission.

Lightroom 4.4 still will not import Fuji X100S .raf files

I'm on OSX latest version...

According to here: http://www.adobe.com/uk/products/photoshop/extend.html your camera is supported.

FUJI X100T raw files in lightroom?

Hi, i have the latest Lightroom CC.
i have the latest Fuji x100t, and i can't import or read the RAW files!
help.

jonathan+7007 wrote:
I took delivery of my x100T yesterday and am surprised to discover this. I had read so many discussions of different RAW processors for the files coming from other Fuji cameras (eg the immediate predecessor x100S and XT-1) that I had NO IDEA the files in this little machine would be so different as to need a dot-release.
This is a pain! Off to download Capture One.
jonathan7007
Wont do you any good, Capture One hasn't released support for the X100T yet.

PSE12 AND FUJI'S RAF RAW FORMAT

IS PSE12 ABLE TO PROCESS FUJI'S RAF (RAW FORMAT) AND IS PSE12 AVAILABLE AS UPGRADE FROM PSE10

Yes its listed. Thanks ssp.
Get PSE12 upgrade as PSE11 is no longer supported by Adobe.
If you also shoot video consider the combo Photoshop Elements 12 with Premiere Elements 12 which is better value for the two apps.
Try free for 30 days.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us

Applying saved jpeg settings to raw (.raf) file.

Hi,
Please could someone help me out? I have previously imported some raw (.raf) files into Lightroom and done my adjustments - i then saved as jpegs and took all files out of the lightroom dashboard.
I now want to go back into a raw (.raf) file that I have re-imported into Lightroom, and apply the same settings that I did previously to the jpegs before.
Obviously, on re-importing the raw files, they have reverted to the original settings and not the jpeg settings that I saved at.
Is this possible?
Thanks for your help

DavidCraikPhotography wrote:
Is this possible?
If you exported them with 'All Metadata', then you may be able to recover the raw develop settings from the exported jpegs using Wreck Hover (a plugin I wrote).
'Recover from export' is the menu item to use.

Can Photoshop CS3 be used with files from Lightroom 5?

I have Photoshop CS3 and I am considering buying Lightroom 5. Does anyone know if output from Lightroom 5 can be processed in Photoshop CS3?

The process engine in LR 5 is equivalent to ACR 8.1(Process version 2012) in PS CS 6 or PS CC.
So if you are using LR 5 you have the equivalent of the latest version of ACR, do all the processing of your raw files with Lightroom. When you are ready to make other advanced editing functions in PS CS3 you use the "edit in function" and a tiff or psd file is rendered by LR and sent to Photoshop.
The only disadvantage is that you cannot use the "edit in function" to make ACR in PS CS3 render the raw file with LIghtroom adjustments, since it is just not capable of reading the full adjustments from LR 5.
PS CS3 uses ACR 4.x (Process version 2003)
This is why you have to use LR to create the tiff/psd file for use in PS CS. In the final analysis when you have completed your work in PS CS you still are left with an additional file tiff/psd.

Cannot import sony arw raw files into lightroom 5

How can I import sony arw raw files to lightroom 5. On Import I cannot convert them to dng.

What camera?
What version of Lightroom?
What is the exact complete word-for-word verbatim error message?
What exactly do you see on your screen anyway when this is happening? Describe in detail.

How do I process Fuji XE2 raf files in lightroom 4.4

Similar Messages

Maybe you are looking for