How do I process multiple files and turn them from raw to jpeg

How do I process multiple files and turn them from raw to jpeg. Ive tried and it seems to go through the files but doesnt seem to process them or store them in the selected folder

Yes that was the first thing I did. Then I used the process multiple files and selected a new folder to put them in and selected use open files and selected to turn them into jpeg. The images flash on the screen like they are being processed, but the folder never appears in library. Is it possible because there are a couple 16 bit files open that this corrupts the task. Do I need to create the folder first. Will elements not create the folder on its own.
Thanks Vince

Similar Messages

  • How do I select multiple songs and uncheck them from compilations (itunes 10.5.2)

    So I found to my annoinance that itunes has recently moved much of my music to compilations that shouldn't be there. I tried searching online for how to turn compilations off or select multiple songs and uncheck them from compilations all at once and although I found both answers, they must have only worked for older versions of itunes. I no longer can find the option to turn off compilations under preferences and when I try to select multiple songs at a time then press "Get Info" the "part of a compilation" checkmark is not there. It is only there when one song is highlighted. This is very frustrated. In fact I would venture to say I've never been so angry with Apple. There are 609 songs "stuck" in my freaking compilations! I don't have time nor should I have to take the time to go through every single song right clicking it, pressing "Get info", unchecking "part of compilation" then clicking ok. WAY TOO MUCH TIME! If anyone has any good news on a faster way to do this I'd be VERY THANKFUL!

    This was a life saver! I even started to manually tick the box as well!

  • How to compile other java files and run them from my own programs?

    I'm developing a unit testing tool for AspectJ, which can originally generate the stubs for aspect unit to be tested. All these stubs are java files. After generation of stubs, how can I program the code to compile this unit together with these stubs, i.e. how can I put the functionality of compilation and run, e.g. command "javac *.java" and "java *", into my own code.
    Hope you can understand what I mean.
    Thank you in advance.

    When I use Runtime.getRuntime().exec(command) for executing the AspectJ compile command "ajc", "IOException createProcess error=2" always occurs, while it is ok for Java comiple command "javac".
    Why this happens when I use Runtime.getRuntime().exec("ajc Hello.java Test.aj")? Is it the reason that Runtime.exec(String) may not support any command in DOS?
    (ajc is the compile command for the java file and aj file.)
    Thank you in advance.

  • Process multiple files and stack with originals

    I have had an ongoing frustration with PSE.  After ranking my photos I use the raw import to post process multiple photos.  Almost all of my post processing occurs during the raw import of my NEF originals.  When done I save the files as stacked JPGs.  Unfortunately I have not found a way to process multiple files and have them stay stacked with the originals.  This results in me doing a "Save As" for every single photo in the photo bin.  VERY TIME CONSUMING!!
    Has anyone determined a way to process multiple files into JPGs and have them stacked with originals?  I am sure this is possible and it is really driving me crazy!!  Any help would be greatly appreciated. 
    Ken
    P.S.  I did search the forums for key words around this issue and wasn't able to turn up any hits.  My apologies up front if this has been addressed before.

    Check http://photoshopelementsbyadobe.blogspot.com/2010/02/batch-processing-in-adobe-photoshop.h tml if it helps...
    But you will have to stack them manually and Auto-suggest stack can also be helpful !
    Give it a try and feel free to ask specific questions...

  • How Do I Extract All Pages From A Pdf File and Turn Them All Into Separate Files

    Hi i have  downloaded 100 reports into a single pdf, that must be extracted into 100 seperate pdfs. A prety straightforward question, that i was not able to find a straighforward answer to.
    Thanks for your help in advance!
    Matt

    i have Adobe Acrobat Pro, Version 10, would that work?
    Mind you, I want to take the 100 pages and turn them into 100 pdf files, avoiding of course going through the process of doing it one page at a time, one page at a time, one hundred times lol

  • Processing multiple Files, no longer lets me convert to jpeg.

    I have Elements 6 for Mac.  I have a folder full of raw images (which I downloaded an update on Camera Raw for my mac a couple of weeks ago, just remembered this) anyways, ...I made an empty folder and title it jpeg.  Then I go to Elements and click on Process multiple files.  I choose the from folder, I choose the new jpeg folder for the 'to', and rename the files, and then click on 'convert files to jpeg high', and then it starts processing, and stops on the first file and it asks me how it wants me to save it, because jpeg is not longer an option, only jpeg2000.  (which I do not want).  How do I get my jpeg's back? 

    You probably have the camera raw dialog set to output 16 bits/channel.
    Open a camera raw file and at the bottom of the camera raw dialog where it says Bit Depth choose 8 bits/channel and click done.
    Then try the using process multiple files.
    MTSTUNER

  • How to remove a font file and its mapping from XML Publisher Administrator

    Hello,
    I am trying to remove a font file and its mapping from the XML Publisher Administrator. If this is not possible, is there a way to disable it?
    The reason why I am asking this is because we just got a new check printer, and I was able to print just fine. However, the MICR font was not coming up properly on the check, so I went ahead and configured the font with the XML Publisher Administrator. Now my check output is coming up blank after running the XML report publisher program. The only change I did was to upload the MICR font and mapped it.
    My template and rdf report file are working fine in another environment we have, so I know that's not the problem.
    Any help is appreciate it.
    Thanks.

    This is how you do it
    Font
    DELETE FROM xdo_lobs
    where lob_code like '<Font_name>';
    Font Mapping Set
    DELETE FROM xdo_font_mapping_sets_TL
    WHERE mapping_code like '<MAPPING_CODE>'

  • How to call the css file and its images from our application......

    hai,
    Im uploading a .css file and some images in Apex shared components ,now how to call the css file and images from my Application.... plz tell me detailed.....
    Edited by: anoo on Nov 3, 2008 12:51 AM

    Hi Anoo,
    Sorry, didn't see that you'd started a new thread, so have answered this in 'undefined' is null (or) not an object "
    Andy

  • How do I print multiple PDFs AND fit them to my paper size?

    Hi,
    I'm using a 24 inch wide plotter with roll paper. I want to be able to print multiple PDFs  AND fit them to a specified paper size. I can print one page and fit it to the paper, but I can't do it with multiple PDFs.
    For example, I have two PDFs that are only 8x8 inches. I want to print them side by side on a 24 inch x 12 inch page size and fit them to size and then FIT them to the page size so the end result will be 2 PDFs printing at 12 x 12 side by side.
    I can't seem to be able to do this. I'm sure I was able to do this using earlier versions. As it is, I have to print one at a time and waste half of my roll paper size.
    Any help?
    Adobe Acrobat Pro, Windows 7 Proffesional, HP Designjet 111 roll fed plotter.
    Thanks

    Note this illustration is Based on Mac version of HP Print Driver standard inkjet. However Control should be smilar Layouts and titles may be different:
    Adjust items shown according to pages desired

  • How do i select multiple steps and move them?

    Hi everyone! I'm trying to select multiple steps and move them all into a branch of a condition outcome. Here's the thing, I have almost completed my workflow with several steps for dynamic approval, however, i need to put a condition at the very start of the workflow and it does not seem that there is an easy way to move all of the steps into one branch. I find the workflow explorer really clumsy in this respect. Is it easier to just drag one outcome of the condition, say to the very end of the workflow? It does not seem to work for me though...hmmm...
    Thanks and generous points will be awarded!

    Funtion Module 'SWD_GET_WORKFLOW_DEFINITION ' gives the structure of the Workflow definition. The informations are stored in following table.
    1. SWDSTEXT -> Table which gives WF Steps and descriptions
    2. SWDSBINDEF --> Binding information is stored in this table
    3. SWDSMNODES -> All nodes information is stored in this table
    4. SWDSMLINES -> Workflow lines are stored in this table.
    <b>SWDSMLINES</b> and <b>SWDSMNODES</b> are important tables for current requirement. By changing <b>SWDSMLINES</b> the bulk copy and paste can be incorporated. But this is <b>very very risky</b>, better to have a backup of workflow definition before doiing anything.
    Any enthuiasts to write code for a unitlity to move multiple steps ?

  • Multiple Black and white conversion from raw or jpgs

    Hi All
    Any help would be appreciated.
    I have 300 wedding images taken on raw and jpg. I now want to convert them all to black and white. Any way I can do this without doing it one at a time (whether using raw or jpg files)?
    Hope someone has the answer or else I need to fork out £500 for CS4!!
    Clive

    Hi
    Thanks for reply. I am able to open and convert from raw ok, what I don’t know if I can do is process multiple files that have been changed, i.e. to black and white?
    I don’t think PE8 will actually do this.
    Clive Wilkinson
    Assessment Coordinator
    Kirklees Warm Zone
    Mob: 07885 203466
    The information in this internet E-mail is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is unauthorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of Yorkshire Energy Services CIC or any of its affiliates. If you are not the intended recipient please contact [email protected]
    Yorkshire Energy Services CIC, company number 3995784. Company is registered in England and Wales and has its registered office at: St Georges Quarter,
    Unit 9, New North Parade, Huddersfield, HD1 5JP, United Kingdom

  • How do i drag multiple files and move to a folder

    I just purchased an IMAC and would like to transfer all of my photos from my old Dell laptop to my IMAC. I am using a USB Flash Drive and now I need to know how to drag multiple items and move the the pictures file? it will only let me move one at a time and this will take forever! I have the magic mouse. I have figured out how to choose/highlight multiple photos but i cannot figure out how to drag them over to the pictures file.

    If you're not used to spring-loaded folders, it may be helpful to open a second Finder window (⌘N) and navigate that to the target folder, so you can just drop them straight in.

  • How can I delete multiple files at a time from "Finder"

    I can't possible delete the thousands of junk files that showed up in Finder once I downloaded Maverick.  I can't delete more than one at a time now.  Why won't the highlighting stay in place on more than one file that I want to delete?

    How are you trying to select multiple files?
    What makes you think that "thousands of junk files [...] showed up in Finder once I downloaded Maverick" (or even installed it)?

  • How do I convert AAC files and put them on my SD card

    Hello all,
    I'm trying to convert some of my itunes track unto my sd card and then play them with my zen. ? The problem is I can't figure out how to get zen media explorer to put the converted files on my sd card. Does anyone know how to overcome this problem? Any help and information is very much appreciated.

    daemonvi wrote:
    tapdiggity wrote:
    Your instructions does not seem to address the issue of putting converted aac files onto the sd card.
    Yes, they do. What they don't answer is "How do I configure <insert random media management application> to convert tracks between different audio formats and DIRECTLY store the converted output to the SD card I have installed in my Zen?
    Why not? Because it isn't really possible. The internal memory of the Zen and the SD card contents are completely distinct storage areas and are not simultaneously visible to the host computer. You either have the Zen in MTP mode where you can interact with the internal memory or you have the Zen in Removable Disk mode where you can interact with the SD(HC) card. It is an either-or proposition. So you must (a) convert your music files to a location on your host computer, (b) put the Zen into Removable Disk mode, (c) transfer the converted files to the SD card and then (d) restore the Zen to MTP mode (where you can use the Memory Card menu items to browse/play the files).
    I suppose I could pull back on the "not possible" part a bit since a stand-alone audio converter should allow you to set a user-specified output folder. As such you could put the Zen into Removable Disk mode first and then configure the converter to send files to the approriate folder on whatever dri've letter the SD card gets mapped to.
    Message Edited by daemonvi on 05-8-2009 2:0 PM
    I think I want to start with (a), now can I use Zen media explorer to convert the files and place in another location on my computer or I must I download a 3rd party application to do this?

  • SonicStage/Atrac3 files--How do I import these files and convert them??

    This is my problem.
    I used to have SonicStage, I no longer do, but I found some of my old CDs that I made using that program, but the atrac3 files(I believe that's what they're called) aren't compatible with Mac, so now what do I do? I've never converted anything in my life, are there any apps I could download that will rip the unreadable files from my old CDs and convert them into usable mp3 (or whatever) files?
    This is all very foreign to me and any advice would be greatly appreciated.

    Re: SonicStage for Mac

Maybe you are looking for