How do I program my remote to work for my satellite and Blu Ray player?

I recently purchased the 55 in LED Toshiba tv model number 42SL417U and I am having trouble finding the instructions on how to program it to work with my Sony Blu Ray player and Satellite. I went to product support and could not find a topic on how to program the remote.

Information on how to program your remote is available on page 79 of your user's guide.
The TV also has CEC functionality to control other CEC-enabled, HDMI-connected devices. More information about this is on page 19 of the user's guide.
- Peter

Similar Messages

What is the process for connecting ethernet. Have ethernet cable connected to stereo received for internet radio and Blue Ray. However Network System Preferences indicates ethernet not connected and has red dot to left. Note Airport wireless is working.

What is the process for connecting airport extreme ethernet? I have ethernet cables connected to stereo receiver for internet radio and another to blue ray player. The system preference network indicates "ethernet not connected" with red dot to left of this message. The airport wireless works and has green dot to left of it. The stereo receiver and blue ray player do not respond and give message not connect to internet. Thank you. / cfpirate

It worked for me finally. I took out the DNS numbers in airport admin utility, and restarted the airport express. I do not remember putting the DNS numbers in, I wonder from where the airport express got those numbers.
After restarting, it worked.
Thanks!

Samsung 3D TV and Blu-Ray player: How to watch in 3D and use the 2D - to - 3D Conversion

I just purchased the Samsung 3D TV. It's fantastic!
To clear up some confusion that I've heard about:
Setting up the 3D glasses is actually very simple. All you have to do is to insert the battery that comes with it. The battery, by the way, is a standard round type of battery. They're widely available. I bought extra batteries at my local Target's Electronics department. With the TV in 3D mode, press the button to turn the glasses on. The glasses are automatically adjusted for the Samsung TVs, so nothing else has to be done with the glasses.
To watch something in 3D, you have to set the 3D TV in 3D mode. To see standard TV or standard DVDs in 3D, you have to turn the 2D-3D conversion on using the remote and, of course, you have to have the glasses turned on.
In the procedures below, when I refer to the Samsung remote, I am referring to the silver remote that comes with the 3D Samsung TV.
Let's say that you want to watch the 3D movie "Monsters Vs Aliens" that came with the Samsung glasses. Here's a step-by-step procedure:
Insert the "Monsters Vs Aliens" 3D movie into the 3D Blu-Ray player.
A message will come up on the screen asking you to choose 3D or 2D. With "3D" highlighted, press the "Enter" button on the Samsung remote. The "Enter" button is near the center of the remote. Below the Volume and Channel buttons is the "Menu" button . Below the "Menu" button is the up-arrow. Below the up-arrow is the "Enter" button. It's a square with an arrow pointing into the middle of it.
The screen will ask you if you want to keep the current 3D mode. Press the left-arrow to highlight "Yes" and then press the "Enter" button.
Turn on the 3D glasses.
The language selection will be in 3D. If you live in the United States, "English" will be highlighted already. Press "Enter".
Press "Enter" when "Play" appears and is highlighted. You'll see the Dreamworks logo and then you'll see the gorgeous 3D space scene.
When the movie is over, the 3D mode will automatically turn itself off, and the glasses will turn themselves off when you switch back to TV.
That's it!!
Let's say you want to watch something on TV that's in 2D mode, but you want to see it in 3D. That's the 2D to 3D conversion. This works much better when viewing something on an HD channel.
On the Samsung remote, press the "Menu" button.
"Picture" will already be highlighted. Press "Enter".
Use the down-arrow until "3D" is highlighted. Press "Enter" once "3D" is highlighted.
"3D Mode" will already be highlighted. Press "Enter".
Press the down-arrow to turn 3D mode on.
Turn on the 3D glasses.
Again, when you reset the TV to 2D mode, the glasses turn themselves off.

I don't have a 3D TV yet but these tips/instructions look pretty helpful. Thanks for posting, BBMG!
Nothing I post is an official statment of Best Buy or Geek Squad, it is only a helpful opinion!

Surround Sound Not Working Correctly Since Connecting New Blu-Ray Player

I recently purchased a Sony VIZIO VBR200W Blu-Ray Player to go with my VIZIO VL420M LCD HDTV, and am having some audio issues. I have a RCA RT2770 Home Theater System, which is connected to the TV through the audio in/out composite (RCA) audio cables (audio in is to the RCA system, audio out is to the TV). The Blu-Ray Player and the XBox 360 are connected directly to the TV using HDMI cables. The problem is the sound coming out of the speaker system is a bit distorted when using the Blu-Ray player. I've also noticed quite a bit of feedback coming from both the TV speakers and the surround speakers when the TV screen is bright (loading menu's of movies, Netflix Instant Queue, etc.). I never had any issues with the sound from the 360, which has been hooked up this way since day one. Any suggestions on how to get the sound to be clearer?
OK, now I'm starting to worry that the feedback I got earlier caused some kind of picture quality issues in the TV itself! Before I make a fool of myself for asking stupid questions, is this even a possability? Help!!!

dumb question - but does your rca home theater have an optical input on the back of it? it will look like a trapazoid cover with sometimes the words "audio in"

How to connect to blu-ray player

How do I get my iphone to be recognized by my Sony blu-ray player? I have it cnnected by a USB port. The blu-ray player says it does not recognize USB device, or that it is not supported. Any help would be appreciated.

I've never heard of a Blu-Ray player that offers this functionality in conjunction with an iPhone.
Your best option would be to buy an AppleTV and connect that to your big screen TV. Then you can wirelessly stream audio, video and photos to your TV, and also mirror the iPhone screen on your TV allowing you to play games etc. on your iPhone but displayed on your TV. The AppleTV also does lots of other things too.
See: http://www.apple.com/appletv/

How do i connect airport express to blue ray player

wondering if i can connect airport express to blue ray player using usb for streaming, etc?

Good question. The single port on the AirPort Express places it somewhat at a disadvantage in a situation like this. It's tempting to think that a setup like this will work:
Modem > Ethernet Switch > Express & Blu-Ray Player both connected to the switch
But, unfortunately, it won't. The reason is that the modem has only one IP address it can deliver and it can't go to two devices at the same time. It will be matter of chance as to which device...the Express or Blu-Ray Player....gets the IP address. The other device will not be able to connect to the Internet.
Instead, what is required is a simple "wired only" router connected to the modem. So the corrrect setup will look like this:
Modem > Wired Only Router > Express and Blu-Ray Player both connected to the router
The router "shares" the IP address that it receives from the modem (an ethernet switch cannot do this) and provides simultaneous Internet connections to the devices that are plugged into the ethernet ports on the router.

Itunes account is under a comcast address along with all my 800 tunes, my .me address is not connected to the music. how do I get itunes match to work for my iphone

itunes account is under a comcast address along with all my 8000 + tunes, my .me address is not connected to the music. how do I get itunes match to work for my iphone

U.S. Cellular does not unlock iPhones: iPhone: Wireless carrier support and features - Apple Support
Sell the iPhone to someone that wants to use U.S. Cellular, and use the proceeds to purchase an iPhone that is usable on the wireles carrier you prefer.

HT1555 i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?

Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

Hi Ron.
Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

TS1702 How do I get my twitter to work? It's been working for ages now and as soon as the IO6.1 update comes out its stops working!

How do I get my twitter to work? It's been working for ages now and as soon as the IO6.1 update comes out its stops working!

same issue here 6.1 messed up my iphone and ipad

HT1551 Atv3 doesnt want to finish installing update although ive tried several times, now the remote wont work with it either and when I press the remote the light on the box flashes several times, I unplugged everything but nothing works and I cant reset

my Atv3 is due for an update and ive tried several times to install it but although it downloads it never finishes installing and tells me that it wasnt possible to update and to try another time. I try every other day and it only inches forward in the progress but it never completes the installation. I was tired of waiting and I decided to keep on trying in a period of time one night until it would finally install, that never happened and Im not sure what is going on but the remote stopped working with the atv3 and when I press a button the box light flashes several times but does nothing, ive disconnected it and left it that way for over 24 hrs, ive disconnected everything (tv, internet etc) and nothing. I cant reset the atv3 through the remote either...i dont know what else to do

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur.

WDTV Live Medi Player - remote will not work unless I unplug and replug media player

Hi I know somebody may have answered this on another thread but I could not find it. I was wondering: Has anybody found the solution to the remote not working until I unplugged and replug the power adapter of the media player? It seems to me that something either gets reset in the unit to cause this and we just have to reset it by stopping the power from going to the unt and it somehow resets it back. I have the latest firmware on it, 2.0.32 I think. ansj64

Ansj64 wrote:I have the latest firmware on it, 2.0.32 I think.dont think, check Setup > About

Iphone 6 (Verizon,64GB,space gray) microphone works for text dictation and Siri but stopped working for calls and voice memos.

My iphone 6 the micorphone has stoppped working unless I speak loudly right into it and its still not clear during calls and voice memos. But it works just fine for Siri and text dictation. I use the earbuds for work so not sure how long its been going on. Only change is I updated to iOS 8.1.3. Not sure if I should exchange my phone or if its a software glitch since the same mic seems to work for some things and not others. Any ideas would be apreciated.
iPhone 6
Space Gray
64GB
Verizon

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

I work for a university and we have a legal apple vendor.Can we re-install macosx for a replacement hard drive for a old macbook?Just one example.

I work for a university and we have a legal apple vendor who we get to buy all our Apple products from.Can we (university) re-install macosx for a replacement hard drive once the hard drive gets replaced? How can we as the university IT department legally re-install macosx on a imac,macbook, macbookair etc. We would like to load customized macosx imaging software onto the mac machines(imac, macbook, etc ). The university has its own IT workshop and we would like our users to get their laptops back in the shortest turnaround time.

We're not "Apple Inc." here, just users like you.
So whatever we say is not an official statement, nor does it in any way, shape, or form represent the official or unofficial policies or opinions of Apple, Inc.
But I'll offer my quick opinion, having worked in information-systems and technology support in a wide variety of environments over many years.
Question #1. "NO!"
No tech support nor repair facility, even if "Apple-authorized", is automatically empowered to install or upgrade OS X on a replacement hard drive just because it is more convenient or time-efficient. When the repair is complete, the student should be expected to (re)install the operating system themself*!
Nurturing students (and occasionally dragging them, screaming and kicking!) as budding computer-, tablet-, smartphone-users to become digitally self-sufficient is a worthy goal that any institution of higher education must pursue.
Making students totally dependent upon "Mother Support" for every little thing about their personal digital devices is a grave disservice to both the students and the people who provide the support. Support-mothered students do become life-long digital dependents, instead of taking the required time to learn enough about the care and feeding of their digital "pets" to sustain them. Entreprenurial students may choose to become 'experts' and actually help each other with their devices, and even make money doing it. Some students may even be inspired/coerced to pursue a career in tech support!!!
*By all means, if the student requests additional help (re-installing the OS), then the University should charge the student a fair price for the service, provided that the user provides the OS on original or upgrade media, or in the case of the 'digital download' upgrades (for OS X 10.7 and 10.8) provides proof of purchase for the OS upgrade, or the original purchase receipt or other recognized documentation for the purchase of the computer showing the version of OS installed when purchased. Students need to learn about personal responsibility, economics ("What is MY time really worth"?), and proper record-keeping too!
Question #2. Regarding the customized imaging software, provide it on media or a link for students to download and install it. Make it their responsibility!
Message was edited by: kostby

How do I program my remote to work for my satellite and Blu Ray player?

Similar Messages

Maybe you are looking for