How do I promote members of a group call?

I made a group call for some people running the server, but there are four people in particular I want to make better than everyone else. My friend said I can promote them to administrators, but I don't really know how. 

I also need to know the answer to this question. Is it possible? If so, HOW?

Similar Messages

  • How to kick someone out of a group call?

    Supposing we are 3 people having a skype grouc conversation/call.I'm not the master/host of the call though. How do I kick out any of the participants (EVEN-though I'm not the host??) There's this guy who continuously removes me from the group call ALTHOUGH he's not the host!The host brings me back in but this is getting old now. I want to know how do I kick the guy out too!!

    I don't know when this post is from, but I know how to kick them.You simply type in /kick [skype username]. For example, if I wanted to kickmyself, I would type /kick [Removed for privacy] in the chat and press the enter/send button.Hope this works for you! 

  • Can not add members to a Group as Group Administrator

    Hi,
    My collegue has created a Group 'WE_PM_group' and added me to that Group with role 'Group Administrator'.
    But when I connect to the 'Create Group Or Add New Members' tool, then after SSO and acknowledging the 'read and understood Beehive Online Guidelines', it does not show the 'WE_PM_group' (it shows no Groups) and I can only Create a group.
    My question : how can I add members to the Group that my collegue created and for which I am Group Administrator ?
    Note : When I connect to the BeehiveOnline Administration Tool, I indeed see my e-mail address within the Group 'WE_PM_group' and with the correct role (Group Administrator)
    Thanks for your help,
    Peter

    If you go to the APEX app and have any group - like your Administrator - you will have a list of group - each of them is a hyperlink. Click on the group and the Group settings will be displayed - one of the fields is the Manager email. Get him/her to puit your email in that field, separated by a comma, and you are good to go.
    Phil

  • How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

    How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
    This would be an SMS group similar to an email listserv but running on the SMS network
    I have seen private individuals offering this service
    It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
    Steve

    I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

  • How can I query all the members of a group using querbuilder?  I cannot find any related properties

    How can I query all the members of a group using querbuilder?  I cannot find any related properties describing members under /home/groups/s/sample_group in jcr repository.

    Hi,
    FieldPoint Explorer is no longer used to configure FieldPoint systems. However, I do not think that the configuring your system in FieldPoint Explorer is causing the error.
    FieldPoint systems are now setup in Measurement and Automation Explorer (MAX).  Information on setting up FieldPoint systems in MAX can be found in the MAX help under: Installed Products>> FieldPoint. Also, I recommend upgrading to the latest FieldPoint driver and version of MAX.  The FieldPoint VI's will be slightly different when you upgrade, so there is a good chance that this will eliminate the error.
    Regards,
    Hal L.

  • How to edit members of a group in Address Book?

    I need to add and delete members of a group in my Address Book. There seems to be no Edit function, though, and although I managed to type in a new name, when I opened the group, the new name had disappeared (and the old, deleted names reappeared).
    Underlying that problem - and the real problem that drives me to write you - is that there is apparently no HELP function that would contain lot of How-To-Do-Directions. Having that would improve the program significantly.

    Hi jnewcomer,
    I believe this to be a Thunderbird Question. I will move ya over to that component.

  • How to add members in REDO group in RAC

    Hi All
    I need to know the syntax to add members in redolog group in RAC database. Currently i have 4 groups (2 belonging to each thread) and one member in each group. I want to multiplex.
    Thanks in advance

    Check out:
    http://www.lc.leidenuniv.nl/awcourse/oracle/rac.920/a96600/mancrea.htm

  • How can I tell what Software Update Groups are members of Deployment Packages?

    I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
    I am trying to clean things up a little bit and I am curious:
    How can I tell which Software Update Groups use
    which Deployment Packages?  I don't see it on the Properties of either one.
    Thanks!

    Funny thing is that you can't see from the software update (in the software update group) in which deployment package(s) it exists. Your only options are manually comparing every single update (not really an option), or use PowerShell and do something
    like this:
    http://myitforum.com/myitforumwp/2014/05/12/matching-configmgr-software-updates-to-a-deployment-package-with-powershell/
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to list groups and members of the groups

    Is there a way to list out groups by the group name and list out the members in those groups? I have been tasked with providing the group names and the members in the group on an Exchange 2010 server.

    Here is my text capture exactly from my powershell after I copy and paste. You can see it starts to output the results in the console but also sends to the txt file. My guess is when you're copying and pasting there is a break somewhere.
    [PS] C:\temp>write-output "" > C:\outputDGmembers.txt
    [PS] C:\temp>get-distributiongroup | Sort -Property DisplayName | foreach {
    >> $name = $_.displayname
    >> $output = `Group Name: ` + $Name
    >> write-output $output >> C:\outputDGmembers.txt
    >> Get-DistributionGroupMember $name | Sort -Property DisplayName | Select Displ
    ayName, Alias, Department >> C:\outputDGmembers.txt
    >> write-output "" "" >> C:\outputDGmembers.txt
    >> }
    >>
    WARNING: Object ipcfcdom.inphonic.com/Distribution Groups/ATTClientServices has
     been corrupted and it is in an inconsistent state. The following validation
    errors have occurred:
    WARNING: There is no primary SMTP address.
    WARNING: Object ipcfcdom.inphonic.com/Distribution
    Groups/[email protected]
    has been corrupted and it is in an inconsistent state. The following validation
     errors have occurred:
    WARNING: "[email protected]" is not valid for Alias. Valid values are:
    Strings formed with characters from a to z (uppercase or lowercase), digits
    from 0 to 9, !, #, $, %, &, ', *, +, -, /, =, ?, ^, _, `, {, |, } or ~. One or
    more periods may be embedded in an alias, but each one of them should be
    James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

  • ORA-00313: open failed for members of log group 1 of thread 1

    Hi
    I'm restoring a database on a different host. I have the backups, from which I want to restore the database. I made the corresponding changes in the initSID.ora file and started the script to do the restore.These are the steps I followed:
    connect target=/
    run{
    startup nomount;
    allocate channel c1 type disk;
    allocate channel c2 type disk;
    allocate channel c3 type disk;
    allocate channel c4 type disk;
    restore controlfile from '/tmp_backups/rman/lev0_open_cf_SID_2826_1';
    alter database mount;
    set newname for all datafiles
    restore database;
    set until logseq = 29317 thread = 1;
    switch datafile all;
    recover database;
    alter database open resetlogs;
    One mistake I made here is that logseq should have been last seq+1, which I did not do. I have it as last seq.
    Restore of datafiles and switching of datafiles was fine. But I get error for redo log files.
    ORA-00313: open failed for members of log group 1 of thread 1
    ORA-00312: online log 1 thread 1: '/u13/oradata/SID/redo02a.log'
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    Why is it looking for at the old path yet?
    I'm not sure what I missed and how to proceed. Please help.
    Thanks,
    Mamata

    I do believe that set newname for all datafiles only means actual datafiles and no redo logs. So with open resetlogs, Oracle tries to create new redo logfiles where the backup controlfiles says they are.
    As with creating a auxilliary database in another filesystem, we use DB_NAME_FILE_CONVERT and LOG_FILE_NAME_CONVERT.
    I am not sure if it is possible to type "set newname for all datafiles" and expect also the redo logfiles to change location.
    You might try to set these two parameters and see if it works.
    good luck.
    rgds
    Kjell Ove

  • ORA-00313: open failed for members of log group 3 of thread 1

    Whenever I try to login as a user I get the following:
    sqlplus user/user
    SQL*Plus: Release 10.2.0.2.0 - Production on Fri Nov 9 10:43:39 2007
    Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
    ERROR:
    ORA-01033: ORACLE initialization or shutdown in progress
    So It occurs to me to login as sysdba and restart the DB …
    SQL> connect sys/manager as sysdba
    Connected.
    SQL> shutdown immediate;
    ORA-01109: database not open
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 536870912 bytes
    Fixed Size 1281264 bytes
    Variable Size 150995728 bytes
    Database Buffers 377487360 bytes
    Redo Buffers 7106560 bytes
    Database mounted.
    ORA-00313: open failed for members of log group 3 of thread 1
    ORA-00312: online log 3 thread 1: '/u06/oradata/RKDB/redo03.log'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 2: No such file or directory
    Additional information: 3
    SQL> quit
    I now realized what happened and how this happened. During a clean-up effort this file was accidentally deleted and unfortunately we don’t have any backups.
    I am willing to lose the data. Is there something I can do so that the startup does not try to open this file ?
    All I am able to do now is to mount the database but not open it.
    Thanks in advance,
    Daniel

    this is what I get now ...
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL> Recover database until cancel;
    ORA-00279: change 608619 generated at 11/09/2007 10:00:41 needed for thread 1
    ORA-00289: suggestion : /u05/oradata/RKDB/arch/log1_33_633207859.arc
    ORA-00280: change 608619 for thread 1 is in sequence #33
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    ORA-00308: cannot open archived log
    '/u05/oradata/RKDB/arch/log1_33_633207859.arc'
    ORA-27037: unable to obtain file status
    Intel SVR4 UNIX Error: 2: No such file or directory
    Additional information: 3
    ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL> alter database open resetlogs;
    alter database open resetlogs
    ERROR at line 1:
    ORA-01194: file 1 needs more recovery to be consistent
    ORA-01110: data file 1: '/u02/oradata/RKDB/system01.dbf'
    SQL>

  • Copy global group members to local groups

    I have an AD environment with a lot of global groups, all named G-FG-groupname and I would like to move (or copy) the members of these groups to already existing domain local groups with a similar groupname but
    with another prefix which is L-RG-groupname.
    Example, in which Testn can be replaced by any name.
    Members of domain global group G-FG-Test1 have to be moved or copied to domain local group L-RG-Test1
    Members of domain global group G-FG-Test2 have to be moved or copied to domain local group L-RG-Test2
    Members of domain global group G-FG-Test3 have to be moved or copied to domain local group L-RG-Test3
    etc..
    Many thanks!

    Hi Hoffer,
    as Mike already said, use the Searchbase parameter. Here's an example how it could look like in the previous script:
    # Import Module
    Import-Module ActiveDirectory
    # Get old Groups
    $GroupsOld = Get-ADGroup -Filter { name -like "G-FG-*" } -Properties Members -SearchBase "OU=OU TestOU,DC=intra,DC=netzwerker,DC=de"
    # Then for each group do ...
    foreach ($GroupOld in $GroupsOld)
    # Get the name of the new group
    $NewName = "L-RG-" + $GroupOld.Name.SubString(5)
    # Add Group Members
    Add-ADGroupMember -Identity $NewName -Members $GroupOld.Members -ErrorAction 'SilentlyContinue'
    # Remove Members from old group
    Remove-ADGroupMember -Identity $GroupOld -Members $GroupOld.Members -Confirm:$false
    Basically, use the Distinguished name of an Organizational Unit as the searchbase parameter.
    If you want to know the Distinguished Name of a given OU, you can either use the AD Console, or use this command (change the name as necessary):
    Get-ADOrganizationalUnit -filter { name -eq "OU TestOU" } | Select -ExpandProperty DistinguishedName
    Cheers,
    Fred
    There's no place like 127.0.0.1

  • Redo log members in a group

    Hi,
    I am running 10gRac on Linux
    I have 4 groups with 1 member each (50MB).
    The DB is running in noarchive mode
    I heard there is recommendation to have at least 2 members in each group.
    Now how can I check if I should add more members to the groups?
    Thanks

    Hi br00klynZ00,
    just imagine that you loose the only member of an unarchive group.
    Maybe teh CURRENT?!
    What do you do then?
    You habe lost data then if you have a crash in addition because you cannot recover your lost instance.
    So you should definitely have at least two members for each group!
    =;-)
    Hope this clarifies a little what the problem is.
    BR,
    Lutz

  • Do any new cisco versions support auto-adding team members back to group chat?

    each day I create a team group chat (9.2.6 or lower)
    a. if someone falls out of the team chat  (switches buildings, goes to a meeting, reboots etc)
    b. they fall out of the team chat
    c. users have to ask me to add them back to the team chat or I have to add all team members in the group every few hours.
    It would be great if it was more of a chat room like feature where anyone in that group can come/go as needed. Do any versions support this feature?
    If not I would like to pass this on as a suggestion. I believe lync supported this feature.

    and persistent group chat looks like it works with cisco jabber 9.7+?
    any advice on how I would submit a request internally for persistent chat?
    a. what is required (what is the name of the app, database stuff I have read about)
    b. which version of Jabber is recommended
    I would like it integrated with Cisco jabber and not a separate chat utility. Also is there a different place to place a "wishlist" request? Thanks!

  • External emails in members of static group

    Hi,
    I have been using static groups as list of emails (like alias) but all emails members of this groups are internal emails all from my domain. Someone ask me to do a list or group of emails but email members are external (yahoo, hotmail etc). How could I do this?.

    Hi jay,
    Your assumptions are correct but,
    The command "commadmin group modify
    " reported OK when I tried to add an external member but did'nt add the member. So I just add the attribute
    mgrpRFC822MailMember: [email protected]
    with an ldif file and it works fine.

Maybe you are looking for