How do I prompt user to enter a non-printing email upon form open

I have a form that doesn't include an email field, but I need to obtain an email in order to send a PDF receipt once the user submits the form to Forms Central. Is there a script that will allow me to do this?

Build a subVI that has two numeric controls for the user to input the data (name them something appropriate like "High Angle" and "Low Angle").
Add and "Enter" button to the front panel.
Set the subVI preferences to include Open Front Panel When Called and Close Afterwards if Originally Closed. these are in Windows Appearance, Customize.
Put a delay (say 50 ms) and a while loop on the block diagram to wait until someone presses the button.
Connect your front panel controls to outputs on the connector pane.
This will pop up a dialog type of window when you need the user to input data. And make the dialog window disappear when done. You can also add valid data checking to the subVI and whatever else you need.
Rob

Similar Messages

Do u know how to prompt user to enter password and validate the password?

hi all,anyone knows how to prompt user to enter password and validate the password as well?I do not need the GUI.Can someone post the codes here?Thanks!

hi all,anyone knows how to prompt user to enter
password and validate the password as well?I do not
need the GUI.Can someone post the codes here?Thanks!Codes are
BufferedReader
System.in
if
else
System.out.

How to allow, user to enter the free text in smart forms and Drop Down list

Hi Experts,
How to provide the user to enter text in smart forms? ie Once the smartform generated, there the user allowed to enter text.
And also is there any option to provide Dropdown list in smart forms.
Possible give with example with clear idea.
Its very urgent!!!!
Thanks in Advance!!!

Hi!
No, there's no way to it, because Smartform is just like a piece of paper, it can't handle any objects, after it is ready.
It can be printed out/archived/sent on email as an attachment and that's all. It cannot be modified after it is completed.
Regards
Tamá

How to restrict the user to enter only numeric values in a input field

How to restrict the user to enter only numeric values in a input field.
For example,
i have an input field in that i would like to enter
only numeric values. no special characters,alphabets .
reply ASAP

Hi Venuthurupalli,
As valery has said once you select the value to be of type integer,once you perform an action it will be validated and error message that non numeric characters are there will be shown. If you want to set additional constraints like max value, min value etc you can use simple types for it.
On the project structure on left hand side under local dictionary ->datatypes->simple types create a simple type of type integer
The attribute which you are binding to value property ;make its type as simple type which you made
Hope this helps you
Regards
Rohit

How to prompt user to enter City & print out the Country it belongs to?

I have one table with “country“ column and “city” column. I need to prompt the user to enter the city name. Then the program should print which country it belongs to. As an example, if user enters “Paris”, program should recognize that it’s in “France” and it should print it out as follows:
Paris ------------------France
Here’s my code:
ACCEPT p_1 PROMPT 'Please enter the city name:'
DECLARE
v_parent_name ccname.parent_name%TYPE:= '&p_1';
v_child_name ccname.child_name%TYPE := '&p_1';
CURSOR reg_cur
IS
    SELECT child_name, parent_name INTO v_child_name, v_parent_name FROM ccname;
BEGIN
FOR reg_rec IN reg_cur
LOOP
    DBMS_OUTPUT.PUT_LINE(UPPER(RPAD(v_child_name, 15)) || '      ' || UPPER(RPAD(v_parent_name, 15)));
    FETCH reg_cur INTO v_child_name, v_parent_name;
END LOOP;
END;Any ideas on how I can implement that?
Thank you in advance,
Lisa.
Edited by: user13675672 on Feb 1, 2011 10:15 PM

Hi,
Do you want people to help you? Then try to help them. Post a little sample data (CREATE TABLE and INSERT statements), some parameters you might want to pass, and the results you would want from that sample data for each of the parameters.
If you can use commonly available tables, such as those in the scott or hr schemas, to show your problem, then you don't have to post any sample data; just the parameters (if any) and results.
For example, your problem is:
"I have a table with city and country columns. I want to input a city, and display the country from that same row." That's a lot like:
"The scott.emp table has ename and job columns. I want to input an ename and display the job from that same row."
So, given the name SCOTT, you would want this output:
ENAME      JOB
SCOTT      ANALYSTor, given MILLER you would want:
ENAME      JOB
MILLER     CLERKHere's one way to do that in SQL*Plus:
ACCEPT p_ename PROMPT 'Please enter the employee name: '
SELECT     ename
,     job
FROM     scott.emp
WHERE     ename     = '&p_ename'
;Don't use a meaningless name, like p_1, when you can use a helpful name, like p_ename.
As Billy pointed out, PL/SQL wasn't designed for user interaction like this. There's no point in trying to use PL/SQL to do it.
I hope that answers your question.
If not, please help me understand, so I can do a better job next time. Don't just say "This doesn't work", or "This is not what I'm trying to get", or "Any other ideas?". Those things don't help anyone understand anything. Point out where the suggested soloution is not working, explain what you are trying to get, and give specific examples.

How to force the user to enter a value in the prompt

Is there a way to force the user to enter a value in the prompt before they run the report?
We have a customer specific dashbaord. The user has to enter a customer number in Dashbaord prompt on a first page of the dashboard. We store that value in a presentation variable. That presenatation variable value is being referenced in all the other pages of the dashabord. If the user does not enter a values in the first page and directly navigates to the other pages on the dashbaord, the reports on the other pages start to run for all the customers. Is there a way to force the customer to enter a value in the prompt before running any of the reports on the dashboard?
Thanks!

by Answer prompts, do you mean Column prompt?
I can not use Column prompt in this senario as the user should not have to enter the same customer number over and over again when he navigates from one page to another on the same dashboards. If there is a way to default the column prompts then this would be an acceptable solution.
I have already defaulted the prompt to a value as suggested in hte blog, but the issues occurs when the user erases the defaulted value. Is there are way to set the default value within the report?
Can you please explaing mroe about option 3 regarding Java Script. Also please let me know what other options there are so that I can check whether they will fit my needs.
Thank you very much!

How to prevent a user from entering characters into a number field

How do you prevent a user from entering characters like A or B into a field that is defined as a numeric field?
Please note that
- we use block validation (for other reasons)
- we are not able to convert these numeric fields to character fields
We want to avoid a user being hasseled with the FRM-40209 ... message.
This message is
- not very helpfull because it does not inform us what the problem field is
- not suppressable
Any hints ?

I went back to the drawing board on this one.
You are absolutely right : the message can be catched !
By writing an on-error trigger you can check for the error number. Sadly enough my first attempt on this used the on-message trigger which never fired hence my desperation.
Anyway, the on-error trigger in combination with :SYSTEM.CURRENT_ITEM or :SYSTEM.TRIGGER_ITEM enables me to display a more meaningfull message to my users.
Thanks for the hint.

How to restrict the user to enter the item in purchase order?

I want to restrict user to enter the item in purchase order.
How can i do this?
Please help
Abhishek

Hi,
You may create a transaction variant for ME21N in SHD0 transaction. Make the item field as output only as shown below:
Result:
You may check the doc: Learning SHD0 with Example
Regards,
AKPT

How can i restrict users for entering manual expenditure batch for inventor

Hi,
Can someone explain me how to restrict users to enter manual pre approve batch for inventory expenditure class in projects??
Regards,

Forms Personalization.
Regards
Dharam

How to Limit the user to enter in Array

Hii Friends'
I am having 1 array control in front panel .In which the user will enter the values.... now actually in real time i will visible upto 20 elements in the array control ...But the user have to enter only 5 elements in the array ....how to restrict them.........

Will the array ever containg more than 5 elements? If so, would you want to have more than 5 elements to be shown? If you could have 6 elements shown, would you want the user to still be restricted to only editing the first 5?
You can resize your array on the front panel so that only 5 elements are shown. Then right click on the array, Visible Items, and remove the check mark from index display. Now they are restricted to seeing 5 elements and have no means of indexing the array on the front panel to get to any others.
If your use case is more complicated than that, then you will need to explain it more so that a programmatic way can be devised to allow or disallow editing of other elements.

How can I get user to enter date & time on a form?

I have a form where I want the user to enter a date and time for an event. The database field is in MYSQL datetime format
I've used the datepicker on the form field but it only allows for a date entry not time.(eeven when seetin the width to 22 chars
I remember doing something before which allowed the user to pick a date and then add the time at the end.
I've got the date defaulted to dd/mm/yyyy and the time to H:mm in the control panel.
Can anyone help please or is there a better way to enter date and time?.
Any help appreciated
Thanks
Clive

Two things:
The column in your database is defined as DateTime, not Date
You use the option on the Date Picker to choose datetime, not date
This will give the user the ability to choose a date and time from the date column. If you need more control over the time, you probably need to add another column defined as Time. Then you can use the validation rules to force an entry rather than allowing the default (current time).

How to rescrict the user to enter a manual condition type once in pricing

Hi All,
We are using a condition type ZSP1 in our pricing procedure. I want that the user should be able to enter the condition type only once during pricing.
eg Suppose the user has entered ZSP1 as 100 in the sales order , then he should not be able to enter ZSP1 again in the pricing. Only one entry should be allowed for the condition type ZSP1
Please respond if you need any further clarification.
Regards
Adity

Hi,
you can Restrict the entry of Condition type Twice with Following User Exit
USEREXI
USEREXIT_PRICING_PREPARE_TKOMK
USEREXIT_PRICIN
we have Implemented for one our Client

How to set which User Profile attribute is used for email messages?

I am having a problem setting up User Profiles in SharePoint 2013. I have users that are both (1) Active Directory users authenticated using Windows Authentication, and (2) Active Directory users, existing in another distinct OU, authenticated via ADFS (active
directory federation services).
My problem is with the ADFS users. I want to have the users unique id be their logon email account ([email protected]), but want to populate their work email attribute with their "actual" or real email account.
If I have an OU (External Users) and within that OU (XYZ Company Users), AND my domain is contoso.com, then I want to add a user such that they have a unique id in active directory ([email protected], but want their email address to be whatever
it is (I.e. [email protected]).
MY PROBLEM: I can setup the User Profile Synchronization service to map the properties perfectly, but when I I try to add/share a user in a SharePoint site, the user's account email ([email protected] is sent the message, not their "Work Email"
([email protected]).
QUESTION: How do I get SharePoint to use the "Work Email" attribute (NOT the account email) of a User Profile when sending email messages?

Okay, within Active Directory, the user's email IS set to
[email protected] The "unique value" (Using the account logon name) works just fine. The problem is SharePoint. When I logon with another account and choose to share a site with this particular test user, the Email for sharing the site is sent to
[email protected] (the account logon name), not
[email protected] (the user's email address)
How do I get SharePoint to actually use the email address of an AD user, and not use the account logon name when sending notifications?

How does workflow retrieve users under position/job when sending email

Dear All:
This question is after my thread before: 'How does workflow retrieve users under an org. unit when sending email", my further question would be how to get users under a position/job.
I find the evaluation path 'WF_ORGUS' that is delivered by SAP, and I am wondering whether it will cover all my cases: to retrieve users under an org. type including org. unit, position and job.
Thanks in advance!
Haifeng Hu

Hello,
Okay, I misunderstood. You don't get to specify the evaluation path - if you fill in a Position then SAP fetches the users in that position. It works, so I haven't thought about it any further. Any reason you want to know exactly how it is done?
regards
Rick Bakker
hanabi technology

How to create mail user who only send or receive email to local user

I setup iplanet message server 5.2 SP1 for window 2000. It work right. But I don't know how to setup a mail user which can only send/receive email to/from local email user(user from the same message server). Thanks.

The easiest way I can think of, would be to isolate these users to a different mail server.
Once you isolate them, you can isolate that server so that it cannot connect to the external world, but only to your other servers, so local mail would be allowed, but not external mails.
I can't think of any way to achieve what you're asking for in the same server that allow some users full access.

How do I prompt user to enter a non-printing email upon form open

Similar Messages

Maybe you are looking for