How do I properly split tracks? HELP!

I have a live continuous mix that I have recorded. All on 1 track. Everything has been mixed but I want to split the tracks. Is there an option other than cutting and just exporting the cuts? I'm afraid that would be rather tedious.
Is there an option similar to Adobe Audition with "Cue Marks" ? You were able to split tracks when exporting based on your cue points..
Thanks in advance!
Message was edited by: .jordan

is WaveBurner my solution??

Similar Messages

How do I play Split-track songs?

Hi, how do I play split-track songs in my library. It comes through with vocals and music together. How do I turn the vocals down? I am not sure that I can, but thought that the question should be asked.

You could always play an unchecked song if you selected it and clicked play. iTunes should however skip over any unchecked songs when playing the next song after playback of the current song completes. iTunes 11.0.1 seems to behave properly for me...
What version of iTunes are you running?
Which view are you using when you notice a problem?
tt2

I need help. How to export split track for Final Cut Pro 7 Thanks

I need help. I have edited a film and now the company I have made the film for want a split track of it. I have no idea how to export a split track off Final Cut Pro 7 and I need simple language to explain it to me as I am a beginner. Thanks

I assume you have multiple tracks of audio? And the audio is distributed discretely over these tracks (sync sound on tracks 1 and 2, sound effects on tracks 3 and 4, music on tracks 5 and 6 for example)?
Then duplicate your sequence by clicking on the icon for your sequence in the FCP browser and control-clicking on it. From the drop-down menu choose Duplicate. Double click on the duplicate sequence you just created to load it to the timeline and canvas.
Now, working on the copy you just made of your finished sequence, click anywhere on the timeline, and type Command + 0 {zero} to bring up your sequence settings. Click on the Audio Outputs Tab.
Once the Audio Output Tab opens, set the Outputs to the desired number of discrete tracks you want to export - in this case I will set it to 8, as I have sync sound on tracks 1 & 2, Voice Over on tracks 3 & 4, Sound Effects on tracks 5 & 6 and Music on tracks 7 & 8.
Once I do that the 8 tracks appear. I set them all to Dual Mono as I want them to be discrete tracks:
Once I am done, I click OK and return to the far left side of the timeline where the audio selectors are, and carefully control - clicking in the empty space above the lock symbol,
From the drop down menu I assign the output of each track - track 1 to to output track 1, track 2 to output track 2, doing so to each track:
You need to set the output for each track. Once all my track assignments are done, I go to the menu File > Export . . . > QuickTime Movie and export my sequence, but now it is exporting with 8 discrete tracks of audio.
To do a quick check that everything is OK, re-import the movie you just exported back into FCP, and open it in the Viewer and you will see that it does indeed have the multi-tracks, as 8 mono track tabs appear at the top of the viewer.
Now give that QuickTime a name that includes "Split Tracks" in the title and copy it to your delivery drive.
MtD
Message was edited by: Meg The Dog to fix typo

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

How to add metadata to split tracks

I know how to do it to a single track but when i click on the next track it still show the name from the previous track. How to add metadata to split tracks for like a mixtape?

Thanks for the screenshots, very helpful.
Once you split them into different tracks, and each track is a different file on disk (as shown in your Windows Explorer / Finder screenshot), you'll want to:
Go through each file
Enter the desired metadata via the Metadata Panel (see below)
Save each file
If you're working with MP3 files, the relevant fields are the ID3 tags shown in this dialog:
If you're saving as WAVE files, the relevant RIFF metadata fields are shown in this dialog
Once you enter the info you want into those fields and the save the file, then it should show up in Windows Explorer which is what I think you're going for.

My speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

my speaker is not working properly in 4s if i use headphone its working now my volume increase decrease button is also not working properly how can i solve it pl help me my warranty finished

Hello. I sent my WRT1900AC V1 to Linksys four days ago (Monday) via UPS with a RMA. Linksys paid the shipping and everything. The router is still in route, and it should arrive to their offices tomorrow. Once they receive the WRT1900 AC V1, they are going to send me an EA8500 as a replacement. But I have been reading the comments about the EA8500 here in the forum and it seems to have the same problems. I guess the firmware is extremely flawed in both routers (maybe it is almost the same code?). Anyway, I will try the EA8500 and I hope it works. I bought a temporary router from Walmart and I paid $35 for it. It is a Belink N600 DB. I can't believe that a $35 router is working a lot, lot, lot better than my previous $250 WRT1900AC router. Unbelievable. If the EA8500 doesn't work, I'm going to try and get my money back from Linksys, or contact The Consumerist or someone to get my money back and get a Nighthawk instead.

How will Find my iPhone app help me track my iphone if someone has disabled the location services which doesnt require an unlock code?

How will Find my iPhone app help me track my iphone if someone has disabled the location services which doesnt require an unlock code?

You can't, and the same if the thief turms off the phone.
What to do if your iOS device is lost or stolen
Reporting a lost or stolen Apple product

HELP - how do I arm two tracks

using GB2 and the help file says that I just arm both tracks and push record.
I'm using a Presonus firewire audio interface, and hear both tracks, but only one records at a time.
what's up? how can I select both tracks
thanks

Hey...I've tried the above mentioned solutions, but I still have the same problem.
I am trying to import 76 tracks from PT. Can only get LOGIC to open up 50 Audio Tracks in arrange. In Audio Prefs, I set the number up to 80 tracks, but when I try to create multiple tracks from arrange, it just says ' no more tracks available'. I have also tried closing the song and re-opening. also tried creating a new song session.
anyone know how to add more tracks?
Thanks!!

Suddenly my magic mouse won't track properly, can anyone help?

Suddenly my magic mouse won't track around the screen properly, can anyone help? It was working fine then it started sticking. It scrolls from top to bottom fine just the on screen movement is effected. The battery is showing 100%, I've changed the fast/slow slider all the way to the right which has helped a little and unpaired it from bluetooth then re-paired it, did an SMC shut-down, cleaned ball, battery points but it still does not feel totally right? Am I missing something?

hi, i had the same problem.
i just put my mac into sleepmode
apple logo left corner --> first option above restart
then i connected my magic mouse ( holding the button)
and then it worked
i hope it is working for you too

Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Hi
Can Any one tell me. System considering the Sales District also in Delivery Split which is not in standard. How to resolve this. Please help me

Dear Srikanth,
I am not sure, if my answer will satisfy you, but anyway I will try:
Field Sales District is technically called BZIRK. In delivery structure is this field located in header (table LIKP), what cause split, if origin document (Sales Order) has different Sales District in some positions. This is standard program behavior. Basically it shouldn't happen, as value is taken from customer master (Sold-to Party) and copied to header and items of sales document. But user can manually changer for particular items.
Well, to solve situation you have few ways:
1. Do not allow users to change value on items - can be managed by organizational decision or by authorization concept.
2. If there is a reason to have different Sales District in items, then it can be managed in in routines for copy control between sales and delivery documents (delete value of BZIRK for all items for instance). But then will be this information lost for further usage. It seems to me to invoice is value copied directly from sales order (field VBRP-BZIRK_AUFT) then it mustn't be a critical for analyses.
3. Your situation also can happen if you wants to collect more sales documents to one delivery. In this case can be that Sales District is different for same customer in different sales order (even seems to be little bit strange). Then solution from point 2 can help as well, I believe.
Best Regards
Arnost

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?

If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple.

Split track audio in Premiere CS5

Greetings all,
I'm getting acclimated to working in Premiere CS5 after years of editing on Avid Media Composer and Symphony. There are of course similarities and differences, some of which I can figure my way through and others where I'll need to ask for help. Here's one.
Suppose I have a piece of video that was shot split-track. On channel 1 we have the lavaliere mic worn by an interview subject. On channel 2 we have the on-camera mic so while searching I can hear the interviewer's questions which aren't so audible in the interviewee's mic. In the final edit I wish to discard channel 2 and center-pan channel 1. On an Avid the audio channels are on separate tracks on the timeline - you can literally remove the channel 1 or channel 2 audio clip and then use a pan tool to take the remaining audio clip and pan it as desired (typically center-pan is what you want with an interviewee but in fact you have infinite choices between full-left and full-right).
How do we approach this issue in Premiere? I'm sure this has been addressed before but after a lot of searching I guess I don't know the correct search terms to find it.
Thanks in advance for any insight.
Peter

Thanks Colin (and Jim).
It's amazing how wedded one becomes to a particular way of working, and how unusual it feels (after nearly 20 years) to start using a different platform.
For anyone who has NOT used Avid (the Meridian and pre-Meridian versions, anyway): imported materials are literally split up into components and stored/handled separately; thus, video ends up in a video file and each audio track ends up in a separate mono .wav or .aiff file, so when they're brought into a sequence they are quite literally individual and totally independent tracks. One major disadvantage of that generation of Avid is that materials need to be imported and reprocessed into Avid media; they don't come in natively. Newer generations of Avid (I believe) have improved this.
Premiere's handling of native clips, where stereo audio is just that instead of individual and independent tracks, is an alien concept that takes getting used to. Modifying the clip to treat audio channels as "mono" is exactly what I was looking for. The "fill left" and "fill right" effects, while they would work, seem a little bit more limiting.
Thanks, incidentally, for not saying "RTFM." I have the download of CS5 and there ISN'T a FM nor can I find pdf FMs as an additional download anywhere. So I'm stuck with tutorials (none of which seem to cover this) and the help files (which don't cover this unless you already know the name of the function). My oh my do I miss software suites with complete read-'em-in-the-tub printed manuals!
Thanks again,
Pete

Split track movies

Howdy,
already posted this over at LogicPro Help, apologies if I'm boring anyone.
I work in tv composing, and frequently get sent split track movies (temp music on one side, everything else on the other).
My current monitors (old Genelec 1029s) have a handy power stitch on the front, so I can switch off the temp side, and listen to my cue (in mono) in situ. But my new monitors (KH120s) have the power switch at the back.
So I was wondering, how do people deal with their split track qts? I know I can extract audio, but that seems too time consuming, as I start a new project for every cue, and its a nightmare lining up the audio every time. And I don't want the movie audio coming through the main outs.
Am I missing something really easy?
I guess I could pull a cable out of the duet each time, but that doesn't seem very elegant...
Thanks in advance

To mute the speaker in OSX, use the Audio Midi Setup app. There you can mute the left or right channel separately.
However, I wonder why you are not extracting the audio from the video. This is basic scoring workflow.
You do it only once when you start a show and each new cue is just a "save as" copy of the previous cue (project) so the video/audio track is already in place.
Once in Logic, You click-hold on the output icon (the double circle) and you can just select the left or right channel. I usually create two audio tracks with same copy of the split track audio file and have one selected to play only the left channel (dialog) and the other one to play the right channel (temp). Now they are technically two independent mono track (that you can pan left to right)
This gives you complete mixing controls (if you have an external controller) for this tracks: solo, mute, eq, etc. Sometimes the production track has problems that you can fix (with automation) so it doesn't bother you when scoring with the dialog.
Screener. Don't you have to make screeners, little quicktime files of you cues to send to the director/producer for approval? Having the dialog on a track in your project, you can quickly make a decent mix, even for your own show reel.
Routing. Usually I have the dialog and temp tracks routed directly to a different channel on my audio interface, so it doesn't go through my master bus. This way they don't show up on the bounce and don't mess up my meters that I monitor constantly. Just for the export video procedure, I route them to the master bus.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Split Track Audio Output Problem

I'm trying to make a split track audio output as one requirement of the deliverables list on my current job. Dialog goes left, music right.
But even though I set up my sequence as two track mono, and have pre-panned the tracks all the way to the left (A1) and right (A2), I seem unable to make a quicktime that will play them as discrete tracks.
Inside Premiere, they play back properly -- A1 is coming out of the left speaker, A2 out of the right. No bleed or overlap.
I'm exporting them as quicktime, 2 mono tracks, ProRes 422. But when I play back the resulting quicktime -- voila, the tracks have been re-mixed together without my consent!
I've tried Media Encoder, with the same results.
FYI, In the "Channel Layout" section I've tried clicking both "mono" and "discrete" without any improvement. I feel like the problem might be that I'm choosing "Stereo" from the "Channels" popup, but there is no option for two channels that are not in stereo. It goes from mono to stereo to 3.
Any suggestions would be most welcome. Especially if they arrive soon! : )
(Using Premiere Pro 2014.1 on a MacPro Quad Core 2.93GHz machine with 16GB of RAM.)

i'm experiencing the same issue since today.
very loud (nearly ear damaging) glitches on crossfades on audio channel. doesn't matter if mp3, aif, or wav.
plus one channel of stereo sometimes randomly gets louder on transitions for a short time.
is still there in export. no matter if directly from premiere or via media encoder. (export as prores 422 with uncompressed audio). disabled native ppro import in AME, didn't help
cleared all media caches and preview files, didn't help.
not using preview files for export.
read alot about this bug being in older version here on the forums, but it is still there in CC 2014 v8.0.1
i am on osx 10.8.5.
please help Adobe.

Split track audio glitch

Hello all,
Just switched from FCP7 to PP 2014. A lot of my video work deals with split track delivery and post. In FCP 7 I would bring in a Pro Res file and have the left track on audio track 1 and right track on audio track 2.
In Premiere 2014, I learned how to replicate this. The problem is that when I pan track 1 all the way to the left I get major distortion on my second track. When I pan the second track (right Channel) to the right the distortion continues. We have two edit suites and I was able to replicate this on both systems.
I thought it was a Pro Res issue, but turns out that I was able to replicate this using PP's own color bar generator. I also experimented with other sequence settings like 29.97 vs. 59.94.
Here's how to do it:
1. In PP go File>New>Bars and Tone. Hit Ok to create this file.
2. In the Project bin, right click on the Bars and Tone and select Modify>Audio Channels...
3. Set number of audio tracks to "2" and Channel format to "Mono".
4. drop into a timeline and pan track one to the left. You should hear distortion on the right or 2nd audio track. Pan the 2nd track to the right and its the same.
The odd thing is that if I pan everything to 99% either way, all is good on both tracks.
I called Adobe and was told that they would look into this as they could not replicate this. I was told I would get a call back in 15 min. 3 hours later I am here sending this out to the community.
This is something that needs to be fixed if I am to use PP at all. Anyone else able to replicate? I am open to any ideas as I have gone through all the settings that I know of. Also, I tried turning off OpenCL with the same results.
Additional issue I found is audio level jumping up when another track comes in. I have a stereo track of music play on track 1. A little into the song I place another audio mono track on audio track 2. I pan the Stereo track to the left and Mono track to the right. When I hit play, the music is at say -12db. Once the playhead hits the mono track, the stereo track jumps up in level even though the mono track is panned to that side.
Thanks,
Jeremy
Mac Pro 2014
OS X 10.9.4
PP 2014 Build 8.0.0 (169)

i'm experiencing the same issue since today.
very loud (nearly ear damaging) glitches on crossfades on audio channel. doesn't matter if mp3, aif, or wav.
plus one channel of stereo sometimes randomly gets louder on transitions for a short time.
is still there in export. no matter if directly from premiere or via media encoder. (export as prores 422 with uncompressed audio). disabled native ppro import in AME, didn't help
cleared all media caches and preview files, didn't help.
not using preview files for export.
read alot about this bug being in older version here on the forums, but it is still there in CC 2014 v8.0.1
i am on osx 10.8.5.
please help Adobe.

How do I properly split tracks? HELP!

Similar Messages

Maybe you are looking for