How do I publish a movie on iMovie when this message appears:"The project could not be prepared for publishing because an error occurred. (Error in user parameter list)"?
When I go to finalize my movie on iMovie or attempt to publish it, this message appears.
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W
Similar Messages
-
Trying to make a dvd from a project and this error message appears .The project could not be prepared for publishing because an error occurred. (-2125)
Hi
Error -2125
OK Error code - 2125 usually indicates that the movie is to large.
It use to pop up when going to iDVD !
iDVD - DO NOT CARE ABOUT Gbs at all. I got movies on 500Mb that do not fit and 50Gb that fits nicely.
iDVD - ONLY CARES ABOUT - Duration. Duration is Movie time + MENU TIME. Choice of
menu and animation of this can take lost of "DURATION" 15 minutes or even more.
Choice of encoding method and use of SL or DL DVDs determine the DVD limit.
iDVD 08 & 09 & 11 has three levels of qualities.
iDVD 6 has the two last ones
• Professional Quality (movies + menus up to 120 min.) - BEST
• Best Performances (movies + menus less than 60 min.) - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
DL DVDs can store about double of these times.
ALTERNATIVE - The Error Code can indicate that free space on Start-up (BOOT) hard disk is
less than 25Gb (my minimum)
calbe - wrote
If you are getting OSStatus error -2125, I've seen this caused by the computer display sleep settings.
Try changing the sleep settings to never and see if you are able to export.
Yours Bengt W -
After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?
Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
When I completed my iMovie (after hours of work), I can't move it to iDVD or the Media Browser. The following message always pos up: "The project could not be prepared for publishing because an error occurred. (-50)". What is this and how can I fix this? Please help ... I need to get the completed DVD in the mail now!! Thanks.
Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W -
No matter how I try to finalize an imovie I get the following message:
"The project could not be prepared for publishing because an error occurred. (Error code = -49)"Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?
Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80 -
Each time i try to share my movie to media browser it sais'The project could not be prepared for publishing because an error occurred. (-50)'' how do i get around this
Hi
Error -43
-43
fnfErr
File not found; Folder not found; Edition container not found; Target not found
So Your original is still there ? or did You move or trash anything ?
Yours Bengt W -
when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
any idea why this has happened? How do i rectify this?Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W -
In iMovie I am getting this message...Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission.
How do I resolve this?Hi
Most often it helps by - Turning Off the TimeMachine application - during work in iMovie.
Yours Bengt W -
This pops up when exporting in iMovie "Unable to prepare project for publishing: The project could not be prepared for publishing because an error occurred. (ParamErr: error in user parameter list)" I have turned off my Time Machine in terminal yet it remains. What do I do, I need your help PLEASE.
Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W -
When I try to export the movie I get this error code. Im doing a music video and have put days into it and now I can not get it to export! My other small project export with no problem.
Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated. -
Unable to prepare project for publishing
The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I fix this???
I have downloaded my family movies captured on Hi8 video through a Dazzle hollywood DV-bridge to the iMac. Everything went well until I tried to finalize the project.I'm having the same problem.
When I export (and I want HD quality) I get the error message that
Unable to prepare project for publishing The project could not be prepared for publishing because an error occurred. (Error in user parameter list)
How do I free up more space on my startup disk? My hard drive has 158.61 GB free. Do I need to free up more space? -
The project could not be prepared for publishing because an error occurred. (Not enough room in heap zone / )
how can i fix this problem?how can i fix this problem?
Go to the right forum.
This forum is for mobile iMovie.
you may need the iMovie Mac forum:
https://discussions.apple.com/community/ilife/imovie -
I can't export my imovie project.
Appears this message:
"The project could not be prepared for publishing because an error occurred. (-50)"
What can I do?Thanks for the details. We have a similar problem (see my post below) and are in the process of adding back each clip and then testing for export. My question is, once iMovie is unable to export the project, does it render the file "bad" and prevent exporting even if you remove the "poisned" clip(s)?
++++++++++++++++++++++++++++++++++++++++++++++++
Hello, We are having a similar problem running iMovie '09. We get the exact same error as you reported.
"Unable to prepare project for publishing" The project could not be prepared for publishing because an error occurred (-50)
We have a very similar situation were we have multiple repeated clips. However, our clips are 2.4 's. Like you, we took the finished project and started eliminating edits that we thought might be preventing it from exporting. The following actions still would not allow the project to export:
removing title pages
removing transitions
removing imported music from iTunes
removed another clip from another event
closed all other programs
closed iMovie, powered off computer, opened iMovie, tried to export
reconfirmed the last project exported would still export - it did without issueThe only difference between the project that will export and the one that does not are these short (2.4's) repeating clips
When we create the new project from the recorded event without making any edits (just as recorded), it exports without issue. We have started the arduous task of adding back in each edit and testing it for export until we determine which edit is causing it to "not export". This is a very inefficient way of troubleshooting.
This is a science project for my son and we need to be able to save it as a QT or mpeg4 movie so that he can submit it to his teacher for viewing and a grade!
Any ideas from any other users would be greatly appreciated. -
this error occurs. Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured. (Project is too Long)
I know this isn't true, as it is only 1:39:31. I have a mac with 160mb and 160 gb available. Could this be the problem? If so how can I remove some things to make room? Thanks!!By exporting to the right format a movie of an hour and forty minutes could potentially use up 160 GB, exactly what format are you exporting to. additionally I'm not clear what you mean when you say your mac has 160 MB and 160 GB available.
Maybe you are looking for
-
Colors not consistent with Snow Leopard 10.6 on an Eizo SX2761W monitor
I am unable to get any color consistency with Snow Leopard 10.6 on my Eizo SX2761W display. Most of the actual "content" (i.e. images, videos, websites, etc.) is displayed very saturated and dark, much more saturated and dark than in 10.5.8. I presum
-
Get JSP file to run with an applet tag under JDeveloper
I Created an applet and an html file under JDeveloper. with the applet tag in the html file. when I run the html file the applet runs perfectly. I Created a jsp file in the same project with the applet and the html file under JDeveloper. I copied and
-
The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.
-
Extracted Data size in sender system
Hi, How to we know the size of the extracted data is sender system before loading data into the receiver system? Which phase in TDMS tree would provide us details? Thanks.
-
Permanently deleting files leaves originals!
I'm new to Aperture, so please bear with me, if this has been addressed. I have seen instances posted, but I am unable to find a complete solution.... My workflow: I copy my images from my Compact Flash Card into a "Client Directory" on HD2. Next I i