How do I publish Android APK files from CS5?

As far as I can understand you need three things to be able to publish Android APK files from CS5:
1. Air 2.5 or greater (I've downloaded and installed 2.7 beta)
2. Android SDK (I've downloaded and installed)
3. Flash CS5 Android Extension (NOT AVAILABLE ANYMORE)
That's right, the last thing you need is no longer available because Adobe is rolling it into the next Flash version. So because I didn't get in on the prerelease with the extension...I'm just out of luck? That can't be right. How do you create APK files from CS5 when you can't get the extension? All of the tutorials out there for creating Android content from CS5 use this simple extension that seems to make everything so easy. What is Adobe's answer for creating APKs out of CS5 if you weren't part of the prerelease? They don't have the extension available anymore so there must be a way. Any help would be greatly appreciated.

You must use the Android extension to get the menu "AIR for Android", for you and das please find the below link:
http://www.mediafire.com/?edyam3lpjuma91c
Also check your private message.

Similar Messages

  • Error when trying to publish Android .apk in CS5

    Hello, I was hoping someone could help me with this. I installed the Air for Android and followed all of the steps as I was told to in the tutorials, yet when I try to publish the .apk file I get an error = "Error exporting the SWF file. Please see the error(s) in the compiler errors panel"
    Yet I have no errors and just drew a rectangle on the stage. Any ideas? I went thru the steps over and over and I have no idea what I could be missing now, but really was hoping to get this to work.
    Any help is greatly appreciated. Thank You.

    how are you exporting the .apk files?
    did you install the ADT?

  • Suddenly cant install any android apk files to Z10

    Dear all, i need help with my new Z10 which I have about one week.
    I installed some apk files via amazon store or directly from sites. I also installed some applications using Apk Extractor on my second android device and simply moved apk files via bluetooth to my BB Z10.
    Everything was fine until yesterday. 
    But suddenly I cant install any android apk files. All apk files are grayed and system reports
    " unable to open xxxx.apk file ".
    Same problem when im trying to install any apps from amazon, or snap.
    I did not apply any system update last week.  I rebooted device several times. Also my  " other sources " settings is ON.
    my SV is 10.2.1.3062
    Any idea please ?   thanks a lot
    (sorry for my english,im not a native speaker)

    I have come across this on another forum but I dont have any idea how to do this? Can someone help please?
    So resolve this TIME consuming problem, i had another look at that support page and this is what i did to fix it Thank you for your help 99jon for the link.
    Copied the elements folder to the root of the HD, then renamed the folder with the installer files contained within to c:\PSElements9Installer then ran the setup.exe as administrator and hey presto, it worked and fully completed the install grrrrr.
    Cheers people of the Digital World, ive now relieved my stress
    Was this helpful?Yes  NoSubmit
    Reply

    Mark as:
        1 posts
    11-Apr-2013
    Currently Being Moderated
    3. TangAdmin,
    11-Apr-2013 17:04   in reply to Digital Controller
    Report
        Had the same problem with PSE10 Copying it to kthe root of c and renaming it to PSElements10Installer Worked perfectly.  
    thanks to all involved
    Was this helpful?Yes  No

  • Download APK files from Google Play Store

    If you want original APK files from Google Play store then do the following steps.  1) open the official website of Google play Store.  2) here no need to sign in with your gmail account, simply select the app/game whose APK file you desire to download. 3) Copy the URL link of the app/game.  4) Now in new window or tab open  Evozi's official website (http://apps.evozi.com) . 5) Now in this new website paste the URL of your desired app on Play Store. 6) Click Generate Download Link (click it until you you see "Click here to Download.....") (Coutesy: http://www.techprobex.com/2013/12/how-to-download-apk-files-from-google.html

    Nice

  • How can I move an icon/file from one screen of my ipad to another?

    How can I move an icon/file from one screen on my ipad to another?

    Press and hold the icon until they start to wiggle. Then while holding it, drag it to the edge of the screen and wait for the page to switch, then let go of the app

  • How can  I checkout an existing file from CVS without going through the wiz

    How can I checkout an existing file from CVS, that is not already in my local jdev, without going through the wizard and checkingout everything?

    You can't. AI doesn't produce .PLT files.

  • How can I transfer a sound file from my "Voice Memos" app on my iPhone to my iPad?

    How can I transfer a sound file from my "Voice Memos" app on my iPhone to my iPad?

    In iTunes with your iPhone connected, click on the iPhone device, select the Apps tab, scroll down to the File Sharing section and pick an app that plays Quicktimes ("Files Connect" works in this example, but I'm open to suggestions of better apps for playing transferred Quicktimes) and drag your Quicktime from Finder to the Documents pane for the File Sharing app.   Once the file transfer is complete, go to the app on your iPhone to play the Quicktime.

  • How to delete a READ ONLY file from Directory

    Hi Friends,
    how to delete a READ ONLY file from Directory , file is in my system only.
    Please help me .
    note: its read only file.
    Thank you.
    Karthik.

    hI,
    try with this statement.
    delete dataset <datasetname>.
    this will definitely work.
    Regards,
    Nagaraj

  • How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    How can I prevent a PDF file from being copied, printed or downloaded? Students should only be able to view the text and and not distribute it in any way.

    You can prevent it from being printed by applying a security policy to it
    in Acrobat. The rest can't be prevented, unless you spend  a LOT of money
    on DRM protection.

  • How can open a html, pdf files from the server (c:\foldername\filename)

    Hi all,
    I am developing an application. in this app i have to implement RMI.
    My problem is this, How can a client open a files from the server.
    all the html, pdf files are stored in the server's directory like C:\audit\filename.
    There is a folder on the server's C directory which contains all the html , pdf files.
    please tell me how can a client open a file from the server using RMI.
    Please send me the solution as soon as possible.
    Thanks & Regards
    Bhavishya

    That's doing it the hard way. Why not use HTTP or FTP?

  • How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

    How do I move all my files from one User Profile (account) into another?
    I needed to create a new account and want all of my files accessible in the new one.

    ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
    now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
    the start of that tree is /
    so, if you were to do:
    cd /
    (cd means change directory)
    it will bring you at the highest branch of the file system.
    cd /Users
    will bring you to where all the users are.
    to see whats in /Users you can use your friend ls command
    ls means list files/directories
    so:
    cd /Users
    ls -la
    (the -la here means show all (even hidden) and long format (very verbose))  this flag is very optional.
    you will see
    fred
    user2
    for example.
    if you want to see the desktop of user2 you would change directory to it then list the files.
    for example:
    cd /Users/user2/Desktop
    Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
    ls -la
    you should then be able to see everything in users2 desktop
    you could have done as well the same thing in smaller steps, for example:
    cd /
    cd Users
    cd user2
    cd Desktop
    this is the equivalent of cd /Users/user2/Desktop
    So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
    /Users/user2
    which most likely the file you had created from the other user was in /Users/user1
    if you copied all the files from /Users/original_user to /Users/secondUser
    most likely yes, all your mail, bookmarks etc would be copied over.
    so in your case.
    sudo chown -R seconduser:staff /Users/secondUser
    should work
    Remember that if you start a path with the character /  it means start from the root of the file system, at the highest top you can ever get.
    so
    cd /Users/fred
    is not the same as
    cd Users/fred
    unless you were in / already
    i know it may be confusing at first but it's actually very logical if you play with it.
    to simplify, think of it that / means C:\  on windows
    you can't go any higher than C:\  (in a way)
    if you're unsure which directory you're currently in, you can always type:
    pwd
    it will tell you where you are.
    for example:
    cd /
    pwd
    this shows  /
    cd Users
    pwd
    this now shows /Users
    cd /System/Library
    pwd will show /System/Library
    cd /
    cd /Users
    cd fred
    cd Library
    pwd will show /Users/fred/Library
    unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
    so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
    ls -la  (this shows all the files where you are)
    if you see myfile in the list
    do a pwd
    whatever is return, the real location of the file would be:
    whatever pwd returned / myfile
    I hope that makes sense.

  • How do I move a keynote file from my computer to my ipad?

    I have a Mac OS X version 10.6.8 and an Ipad version 7.0.6. How can I move a Keynote file from my Mac to my Ipad? I do not have Icloud on my Mac.

    Have you tried e-mailing the Keynote file to yourself? You can then press and hold on the attachment in Mail and choose to open in Keynote. However the results may depend on your version of Keynote.

  • I have converted a pdf to word. How can I access the Word file from my online account?

    I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

    Hey Fabrizio,
    You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
    Do you get the 'download' prompt?
    Also, you can find the converted files by clicking at the 'Files' tab. 
    Please try the same using a different browser and check.
    Hope to hear from you.
    Regards,
    Anubha

  • How do I transfer a music file from my MacBook Pro to my iPhone?

    How do I transfer a music file from my MacBook Pro to my iPhone?

    If you download Adode Reader (free but very limited) or GoodReader (many features) - you can use file sharing.
    Connect the iPad to the Mac and launch iTunes. Select the iPad on the left side under Devices. Click on the Apps tab in the iTunes window on the right. Scroll down to the File sharing apps window. Click on the file sharing app that you are using (Adobe Reader or GoodReader in this example). Drag the document from the desktop onto the file sharing window on the right side - or click on the add button in the lower right corner - and navigate to where the file is on the Mac and select it that way.

  • How do I import my video files from old iPhoto - in time machine - to new iPhoto?  Photoes came across, video said incompatible.

    how do I import my video files from old iPhoto - in time machine - to new iPhoto?  Photoes came across, video said incompatible.
    i have moved from a mac pro to a mac mini,
    Mini now has mavericks and latest iLife stuff, I clicked import, was all good, then at end, no videos came across.
    Is Mavericks,/iPhoto having a compatibiltiy issue with some video formats....???
    Your help is appreciated gang.: )

    Please describe exactly what you did. In moving to a new machine no importing is involved. The best way is to simply connect the two computers together and drag the iPhoto library from the old one to the pictures folder go the new one and launch iPhoto
    LN

Maybe you are looking for

  • The FOD schema error our while creating the database. Please help.

    I couldn't run the schema for the FOD demo application. when I follow the steps, I get some exception during the database create part. From the File menu, choose Open. Open the workspace c:\temp\Infrastructure\infrastructure.jws. ( I edited the build

  • Grabbing one layer... but moving another?

    I'm using Photoshop CS4 on a Mac. I'm having a strange thing happen that hasn't always happened. When I click on a layer to move it... suddenly when I go to move it, it switches to another layer and moves THAT (wrong) layer. It's really annoying. The

  • Multilingual data file Oracle - 8.1.7

    I am using 'sqlldr' to insert data into Oracle 8.1.7 database(charset UTF-8, OS=Win NT) from a datafile encoded in UTF-8. This datafile contains data in English, Japanese, Chinese languages. All rows were inserted into the database but I couldn't see

  • AppleMail will not appear, nor quit! (read on)

    So I just got a new 13" MacBook Pro, did the migration assistant from an old macbook pro with 10.6.3 on it as well. So.. the problem is, on the 13" MacBook Pro, you click on Mail, it opens, but the program doesn't appear by default. you have to manua

  • How to reset an iMac?

    My iMsc is frozen! I can't turn it off or reset it. There is a small multi color circle and a small window asking "the network "belkin.694" requires a WPA password" but it will not let me type the password. How can I reset the computer?  Please help!