How do i pull off this effect?

i was watching this video (https://www.youtube.com/watch?v=bZeCtKvV9EM) and was wondering how i could get the quick camera movements shown at 0:32-0:35. any ideas?

As Myl says, it's simple. But anything in AE that is simple is complicated by the number of adjustments and tweaks and additional effects that can be piled up and adjusted independently or interactively. That video you are trying to copy has a new effect, or an effect variation, and a new piece of video on each of eight or twenty layers every second or two.
You may also notice that the lighting on the main character changes in each of the many different takes and angles from low key to high key, from heavy backlighting to flat overall. Each of those setups creates a different contrast ratio, that can be enhanced with effects, that allows blending effects and keying and mattes to work in different ways.
Be sure to shoot high quality video. You can always degrade good video but it's really really hard to make bad video look good.

Similar Messages

How did they pull off this animated image on Facebook?

Link here
Can someone tell me how they pulled this off? Even in the newsfeed, we see the animation. This is a first for me in many years of using Facebook.
It's not just renaming a .GIF to .JPG -- we've all tried that, it doesn't work.
But this guy managed to pull it off somehow.

Guess what?
Same trick, different day, different way.
-Noel

How do I turn off graphic effect of Open File dialog box?

There is a graphic effect in OSX 10.4.11 of a slot appearing in the top of the window of programs like Safari 4.1.3 and then an 'Open file..' dialog box emerges from the slot and warps downwards. This is almost guaranteed to crash my Mac!
Please, how can I turn off this effect?
Thanks!
[You don't need to read any further but my problem relates to an archived thread:
https://discussions.apple.com/thread/1313995?start=0&tstart=0
In brief, the thread is about some of the old white Imacs over-heating and causing graphics problems.
I still have a largely useable Imac because I avoid using any graphic effects that cause system crashes: Dock graphic effects, Genie minimise feature, Exposé, and full-screen video feature in Youtube.}

I wonder if Quartz isn't the problem & using the Safe Boot driver...
See this great post by themachead on how to list the extensions in Safe Mode with System Profiler then compare to the extension folder!
http://discussions.apple.com/thread.jspa?messageID=10161377&#10161377
or disable it?
http://hints.macworld.com/article.php?story=20040724190553112
Check if your Mac is using it...
http://www.entropy.ch/software/macosx/#quartzextremecheck

Creative cloud won't remove my credit card, and now it won't let me cancel! How do I get off this ride?

I first tried to remove my credit card because I no longer want that card charged, but the card keeps coming back. So I decided, after all the trouble I've had with Dreamweaver crashing and Photoshop throwing up 'welcome screens' and all my settings getting changed with every update, to ditch Adobe CC for good.
However, I cannot cancel my account! The instructions show that when I click on CANCEL ACCOUNT I will get a window warning me of what I'll be losing, but instead I get a window telling me I have to contact customer support. Then when I follow these windows, there is no email address!
I've been using Adobe products since 1990. I've written books on Photoshop and Pagemaker, and lobbied (successfully) at the university where I taught to replace Quark with Indesign. I've pioneered Adobe Acrobat 3 for newspaper prepress.
But this is the last straw.
Please, someone tell me, how do I get off this damned ride???

That's the same damned window I got from the site, with no contact address.
I don't want to phone because it will cost me a fortune.
I don't want to 'chat' because I'm busy and can't afford the time right now.
I just want a BUTTON to click to stop Adobe debiting my credit card.
Just like I wanted to permanently rid myself of the Application Frame, but it kept coming back in all apps after an update. Just like I wanted to permanently rid myself of the welcome screens but they kept coming back. Just like I want my apps - especially dreamweaver - to work, instead of crashing daily. I guess I'm spoiled; I work on a Mac because I like things to work.
24 years of Adobe and you've finally managed to piss me off completely!

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.

Last week I've install Mac OS X Mountain Lion and then after the installation finish my IMAC start up in verbose mode. How can I turn off this mode and start my IMAC normally. I've try to key in the code "sudo nvram boot-args=" in terminal also.
Thank you for all of your answer.

I've seen it mentioned on here that a PRAM reset may solve it:
Reset PRAM
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P and R.
You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Pls. let me know how to get rid off this ribbon?

Hello
I am developing an VISITOR Adobe Interactive Form, i have Designer 8.1 and Reader 9.0 in my Windows 7 Laptop. When i checked the menu EDIT-->form properties --> Compatability, its Adobe XML form File (XDP) When i opened this VISITOR interactive form in a browser, right clicking and checked form
PROPERTIES, then i saw the "PDF Version: 1.6 (Acrobat 7.x)"
When i executed/run this interactive form, am getting a violet colred ribbon on the top of the form, with a text of "Pls fill out the folowing form. You can save data typed into this form" on left corner "
But, i do not want to get/display/see this violet ribbon on my form, pls. let me know how t get rid off this robbon?

I bet if you Google "iPhone error code 1611" you'll get a clue as to how to fix your problem

Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.

Every cut I make in the sequence window leaves one remaining frame from its deleted neighbor clip. How do I turn off this feature - It is driving me mad.

Here are 3 pictures detailing what I'm experiencing.
Picture 1; clip 1 tail frame.
Picture 2; clip 2 head frame.
Picture 3; clip 2 head frame is now tail frame of clip 1.
does this help describe what is happening? Basically every cut I make
leaves an unwanted frame as a ghost of the missing cut.
best,
Fred
On Wed, Dec 10, 2014 at 4:50 PM, Kevin Monahan <[email protected]>

When I open my image, it is covered with tiny coloured dots. how do I turn off this view?

when I open my image, it is covered with tiny coloured dots. how do I turn off this view? i've used photoshop for years and never encountered this. i looked at the histogram for some means of turning it off, but no luck. help

The issue I think is connected to the colour profile, and the 8,16, or 32 bit image mode option. In the past, my images have come from lightroom as 16 bit files and I've never had any issues. I guess I'm not very adept at the file handling aspect of this program. I shoot in RAW and like to play around with my photos, then print them. I was under the impression I should be using the srgb colour selection not RGB, but then I've read I should change it to RBG once I'm ready to save the file to print. I also changed my files over the 8 bit from 16 once I saved the after using photoshop.

I can only purchase 3 times per day,how can i turn off this sort of protection?

I can only purchase 3 times per day,how can i turn off this sort of protection?

You cannot go back, but you can fix the battery problem, which is NOT an iOS 7 problem. I've had much better battery life on iOS 7 than I have have had in the previous 6 years of iPhones. If you are not then there's something wrong with your phone, not with iOS 7.

I have Photoshop cs5, version 12.0.5. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied?

I have Photoshop cs5, version 12.0.5 x32 installed on a Widows box. I keep being offered an "Update" to 12.0.4 and am puzzled. How can I turn off this offer or should this update be applied? If it should be applied how to do it. When I try it, the update fails.
Thanks!

I found the answer in another forum thread...

HT201150 How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?

How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
With the position of the power button on the Retina MacBooks, any mistake turns off the screen in the middle of a presentation or any activity using a projector or big screen — a huge waste of time to wake up the display, enter password, have the projector sync back, watch audience disconnecting from what was being discussed, etc.
This is very annoying, and seems to add to the increasing collection of options Apple decided to make by itself instead of allowing the user to choose.
Come on Apple guys, I'm using my Mac because I want options and lots of preferences to tweak to my needs.
If I needed the lobotomized version I'd be using my iPad!
Any way (official or hack) to change this button back to its proper funcionality?
Thanks!

cterra wrote:
How can I turn off this "feature" and have the power button bring me the shut down / restart / sleep dialog by default again?
Not what you want, but you can get the shut down / restart / sleep dialog by holding the power button

How can I pull out this calendar to schedule report

Hi expert,
there is no calendars for report scheduling in infoview, please have a look at attached file. how can I pull out this calendar to schedule report.
Many Thanks,

Hello Zhang,
You have to create the calendar in the CMC then use it when scheduling.
See KB article https://bosap-support.wdf.sap.corp/sap/support/notes/1651984
Regards,
Monia.

"Set Web Site Rule" window is annoying. how do i shut off this function it poped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get this site open !!!! ???

when ever i put in an address or click on a site a "Set Web Site Rule" window pops up asking if i want Firefox exe to allow some function to occur. it does not seem to be security related but rather simple functions. Step 1, step 2 , blah blah . "Set Web Site Rule" window is annoying. how do i shut off this function it popped up more than a dozen times to connect to even this web site? then i had to click it another dozen plus times to get the next mozilla site open !!!! ??? if firefox does not know what it is doing how can i??????
== This happened ==
Every time Firefox opened
== i am just setting up this pc how ever i down loaded the most recent version 3.6.3

by submiter - self solved: (thanks for the psychic help)
seems the problem was not with Firefox itself. Rather it seemed to have been an ad-blocker program called "WebMonitor" . i began by deleting Firefox and then opened Explorer (which i seldom do) and the same thing began to happen with MSN. So i
began deleting anti-virus programs till i came to the above mentioned freeware ad blocker "WebMonitor". it is a shame because i uised to have a program that blocked all ads on a web site which was such a relief to me.

What's the best way to pull off this guitar trick?

I have a funky wah-wah guitar riff (about 5 seconds in length)and would like to have part of the riff play on the left speaker and the second half play on the right speaker—kind of flow between the two speakers organically. The riff was originally recorded in mono.
What would be the best way to accomplish this effect? Automation and pan the signal in real time? Or double the recording on two different tracks and the cut it up and pan so one half plays on the each speaker for half of the time? Any other ideas or tricks?
Basically, I’m just trying to get it to sound as “natural” as possible, if this makes any sense. I’m just curious how you guys would pull this off. Thanks for any tips.

hi
personally i'd do what you suggest: automate the pan of the gtr region/track.
i'd either use one of my midi controller knobs - assign it to pan and then do it in realtime... or just draw in the pan automation and play around with the nodes of the automation and smooth them out with the curve tool...
you could also use something like the stereo spread plugin and the tremolo and automate the later (depends on the rate of panning you want and the effect)
or use a pan plugin....i think destroyfx had one - but i can't find it now - something like autopan....which you can sync to the bpm.
hope that helps
rounik

HELP! How do I turn off this....

I been read blackberry manual book but all the information not tell me detail which piss me off. My question is how do I turn off the vibrate for specific Blackberry Instant Messge (BIM) cause many friend keep talk me and the vibrate drain my battery. Also I would like know what the heck is "Level 1 Message" and "Messenger" cause there no information explain about this. you can find under speaker icon > Profile > Vibrate. If you know anything about this and I thank you so much.

First off your BIM, BlackBerry Instant Message is the same as BlackBerry Messenger.
1. BBMessenger to turn off vibrate: Edit your profiles per the instructions below, look at "Messenger" settings (there are two for new message and alert) and set that to profiles.
2. So you know now what Messenger is. Level 1 Messages can be PIN messages or any user you set to receive as Level 1 Messages, which can receive a different notification alert than other messages. Look at your Messages > Options > General Options.
1. Select the Profiles icon
2. A box will appear where you can quick select between Loud, Vibrate, Quiet, Normal, Phone Only, and Off. If you wish to quick change the device profiles then select the one you want and exit out.
3. If you want to edit the tones assigned to the device applications then select the last option, Advanced
(some older models and OS 4.1 and below will not have the "Advanced" step--if Advanced is not present go directly to Step 4 below).
4. Select the profile you wish to edit. (Loud, Vibrate, Quiet, Normal (default), Phone Only, Off)
Note: on the 8100, 8800, and 8300 models: Do not click the trackball. Instead, click the menu key to the left of the trackball).
Note: The profile that is in use will say: (Active)
5. You will now see a list of all applications that can have a tone assigned (Browser, Calendar, Level 1 Messages, Messages ([email protected]), Messenger, MMS, Phone, SMS, Task ect..)
6. Select the application you wish to edit the tone / notification for
7. You can now edit Out of Holster and In Holster tones/ notifications.
a) Select between: None, Tone, Vibrate, Vibrate+Tone
b) Select the Tune you wish to use
c) Select Volume (options are Mute, Low, Medium, High, Escalating)
d) Select Number of Beeps (options are 1, 2, 3)
e) Select Repeat Notification (options are None, LED Flashing)
f) If set to Vibrate or Vibrate+Tone then select Number of Vibrations (options are 1, 2, 3)
8. Repeat a-e for each of the desired applications listed in 5 above
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do i pull off this effect?

Similar Messages

Maybe you are looking for