How do i purchase ring tones or ringback tones for my phone

how do I purchase ring tones and ring back tones for my phone
how do I designate specific tones for specific people

You use a free app like Zedge for the ringtones or use an app like Ringtone Maker, both in Google Play Store and free or similar to snip the desired parts from songs on your phone from your own collection.  To assign to a contact, go to the address book and tap the contact, tap EDIT, and scroll down to assign a ringtone.  As far as ringbacks go....you have to buy those from Verizon either through the My Verizon app or from your My Verizon account page online.  Notice:  most people hate to hear other people's ringback tones plus, the volume is always too loud and the quality is horrible.

Similar Messages

  • HT204416 How doI install purchased ring tone a on iPhone 6?

    How doI install purchased ring tone a on iPhone 6?

    Did you copy your purchases over to your computer's iTunes via File > Devices > Transfer Purchases before updating the iOS ? If you did then it should be in the Tones part of your library so that you can sync it back to your phone.

  • HT5312 Hello I have purchased the account from the shop for mobile phones and when Dgt a balance of $ 75 U.S. dollars tried to go down some programs, but ask me to answer questions and there have even when the shop is not accepted to give me any data abou

    Hello I have purchased the account from the shop for mobile phones and when Dgt a balance of $ 75 U.S. dollars tried to go down some programs, but ask me to answer questions and there have even when the shop is not accepted to give me any data about amyl which bearing correctly and password also trueThe name is true, how can I re-answer these questions??? replace phones is that Ahab Please give me the quick fix and sent the answer to Emile is:[email protected]

    Well I can't understand your english at all. If you need to reset your security questions, then try this:
     Account Security Team (AST) 
    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE131
    Call them up, and let them know you would like to be transferred to the Account Security Team.
    Or… click on the blue "Start your support request online" links.

  • On IOS 7, how can you tell when your battery is charging for your phone?

    on IOS 7, how can you tell when your battery is charging for your phone?

    thanks everyone=you all helped.
    I wasn't used to not getting the 2 sided plug- now I know I am ok>
    **hugs**

  • I backed up two Iphones to the cloud and accidentally chose merge. How can I reset it to have seperate backups for each phone with the same ITUNES login?

    I backed up two Iphones to the cloud and accidentally chose yes to merge the contacts from the two phones. How can I reset it to have seperate backups for each phone even though I am using the ITUNES login?

    i merged two phones contracts are together how to get back to seperate

  • How do I distribute a dll with UserControl made for Windows Phone 8.1 Xaml WinRT to other developers

    I have created a dll for Windows Phone 8.1 Xaml WinRT.  It has two UserControls and two classes with APIs for developers to use.  In the Silverlight environment, I would just send the DLL from the BIN directory to the other developers who would
    reference it and be able to consume the UserControls.
    With WP 8.1 Xaml there are several files in the BIN directory besides the DLL; there is also the following:
    A .pdb file
    A .xbf for each UserControl
    A .pri file
    A .xr.xml file
    When I send it to the other developers and they have all of the files from the BIN directory, they reference the .DLL but get the following when they try to use one of the UserControls at design time:
    TargetInvocationException: Exception has been thrown by the target of an invocation.
    TypeLoadException: Could not find Windows Runtime type 'Windows.UI.Xaml.TickBar'.How do I need to package this for the other developers to be able to consume properly.  I looked at Visual Studio
    Extensions that that seems like a lot of work to just send someone a DLL.
    Dick

    Hello Dick , 
    I have a problem similar to your problem, currently I am making a one dll file that contained  one class file and one User control. after build project
     I could see files like  this a photo.
    Acutually I am trying to  make a extension sdk, but I don't know correctly how to place files to dirctroy.
    As mentioned by you I tried to follow.
    LIBRARYNAME.dll
    LIBRARYNAME.pri
    LIBRARYNAME(folder)
    ---UserControl.xbf
    ---UserControl.xaml
    ---UserControl.xr.xml
    But I can not use the xaml( usercontrol.xaml ) on when installed in other apps.
    This is my vsix folder sturucutre ,Let me know if you ever know about that
    best regard 
    Derrick

  • HT4623 can not download ring tones or ringback tones to my new iphone

    need help to download ringback an ring tones

    Ringback tones are not something you download. It's a service through your provider. Contact your provider for information on how to access it.

  • How long do I have to get apple care for my phone after purchasing it?

    I was just wondering how long I have to purchase apple care after I recently purchased my phone?

    60 days.
    (113955)

  • How to delete Purchase Order if they are open for 3mnts automatically?

    Hi,
    My client wants to delete Purchase orders from database if they are open for over 3mnths automatically & also system has to generate messages for Purchase orders for which an Goods receipt has been posted & if no invoice has been paid for a GR after 30 days system has to trigger message automatically asking to pay the vendor. How can this be done?
    Regards
    Chandan

    Hi
    pls refer the following link
    Re: Automatic Close PO Outstanding

  • How do I get proof of purchase which has the IMEI number for my phone?

    For my insurance I will need to supply a proof of purchase that includes the IMEI number on it.
    I ordered my iphone online from the UK Apple store and the invoice does not have the IMEI number on it.
    Any ideas on how I can get some proof of purchase with the IMEI number on it?

    What would an insurance company need the iMEi number for ?
    It has nothing to do with them.
    If the phone has been lost/stolen then sure your mobile operator needs to know so they can block it but not your insurance company.
    By the way its recorded with in your computer Itunes backup if you want to find it.
    For security reasons Apple would never show an iMEi number on a receipt thats likely disgarded.
    It is however on the box on a sticker underneath.

  • HT201238 How can I purchase iCloud storage as a gift for someone ?

    I Want to purchase iCloud storage for someone as a gift.. Is that possible

    The problem with this that it isn't a one-off payment. You have to give a credit card number, and then the monthly subscription is taken automatically until you cancel it. The credit card number would be the one in iTunes, so you couldn't use yours but then have theirs used to purchase songs or movies. Probably the only way would be for you to just give them the money, which isn't the nicest way of giving a gift.

  • How to activate Purchase datasource without deleting setup table for others

    Hi Gurus,
    In developement system purchasing datasources 2LIS_02_HDR, 2LIS_02_ITM and 2LIS_02_SCN are active and deltas are also running for these.
    Now acccording to the requirement We need to activate other datasources as well like 2LIS_02_CGR and SGR .........
    To so this do we have to run the setup table again or any other option is there for this??
    As this step would take lots of time in Production and for this downtime would be required which is not feasible.
    Please suggest some solution.
    Thanks in Advance,
    Uday Shankar.

    Hi,
    We will do the setup (Filling and Deleting) concept based on application component it's not based on DS .S you don't have other way.
    Regards
    Ram.

  • CSCul50370 - C-Series TC does not send DTMF with secondary dial tone or ringback tone

    This bug has also been confirmed to affect SX20 Quick Sets.

    Hi Jose,
    Firstly is this a UC-500 based CME? I am not aware of a 8.5 version for the UC-500 unless this is a pre-production release, as far as I am aware the UC-500 is only supported up to 8.1 at this stage.
    It would also be good if you could provide a copy of your running configuration (With sensitive data removed like usernames and or passwords and peoples names and numbers), this will help us in understanding the system configuration.
    It also seems that the system has not been configured with CCA as there are no identifying markers in the configuration you posted that would indicated this was a CCA build, which leads me to think that this is a CLI build right??
    I am personally not very ofay with the Portugal carrier setup so I best not post up a configuration of what the Voice-Port looks like as it might not be compatible with your local carrier, but I am curious as to why your FXO ports start at 0/0/0 typically on a UC-500 system they would start at 0/1/0 as the first 4 voice ports are normally reserved for FXS (Unless of course this is different for your region), which again makes me wonder if this is a UC-500 system or maybe an ISR (2800 series or above)??
    Please post up your configuration it will help out a tremendious amount.
    Cheers,
    David.

  • TS4006 How do I shut off notification when I search for my phones. I don't want notification sent.

    I Don't want notification sent cause I don't want my kids knowing Im looking to see where they are. When I'm just checking that they are where they told me they are suppose to be. But they get a notification telling them someone used your find your iPhone password

    you can use find friends app rather then find my iphone

  • HT201359 how do i change payment plan on apple id for i phone for apps

    need help to change apple id payment plan for apps but keep same id  just got the new iphone 5s  what to g
    et apps but not letting got new card with differnt number and new address but not lettting me change any thing

    Hello layasdad1117,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    If you need help changing your payment information, contact iTunes Store support. Or you may find the answer to your question below:
    If you change your payment method, make sure your account information matches the credit card information on file with your financial institution.
    Have a nice day,
    Mario

Maybe you are looking for

  • Getting a new MBP and I have a few questions

    I'm getting a new MacBook Pro, replacing my Late 2008 model (2.8 GHz T9600, 320 GB HD, 4 GB RAM) for this years' late 2011 model, a 2.4 GHz (2760QM) quad-core Intel Core i7 Sandy Bridge, 750 GB, 4 GB RAM. Now, this new computer is basically an early

  • Oracle RAC Question

    Question about oracle rac. lets say we have a 3 node RAC database and our tnsnames.ora file is configured to point to node 1. If an application is connected to the database using the database connection information that is on the tnsnames.ora file (p

  • InvocationTargetException acting odd

    If I invoke a java.lang.reflect.Method and that method throws InvocationTargetException then surely the first stack frame of ite.getCause() should be the method that I invoked, except that's not happening! In fact the frames returned seem to be nothi

  • Secure EJB access

    Hi, I have application deployed on Oracle 10.1.3.1 application server. The application uses customs security provider and EJB's are secured in this server. I need to access these EJB's from another remote server. Below is the sample code: public stat

  • Free Plug-ins from OnOne Software

    Dave Cross posted a link to free Plug-ins from OnOne software on his blog this morning. Here is the link: http://davecross.blogspot.com/ I've downloaded them and they work fine with Photoshop, but PhotoFrame and PhotoTools are supposed to work with L