How do I put 2 or more pictures into one frame?

Please help.

Hi
No not in iMovie'13 (vers. 10.0.x)
You have the Picture in Picture function - but it is limited and can not do 2 half frames.
You need to create this outside iMovie'13 (vers. 10.0.x)
- QuickTime Pro - Can do it (but it costs $20 about and is a very tedious task)
- FinalCut Pro-X - Can do it (but cost is $300 - and a bit of learning - but easier than QT-P)
Free alternative: I know of NO ONE - anybody ?
Yours Bengt W

Similar Messages

How do I: put multiple PDF pictures into one PDF page?

I have just installed Adobe Acrobat Pro Ver 9 - so this apllication and its associated SDK are the only applications available to me for use.
Adobe Acrobat was chosen because of its AutoCAD capabilities (when AutoCAD is not present). i.e. Using Acrobat & AutoCAD's plot configuration files & Pen / colour selection table ensures the output has correct line thicknesses (sometimes colours in CAD are used to represent a line's thickness) - this is preserved when using Acrobat.
The generated output is fantastic. However, when I try to print the output via Excel / Word (used for layout) - my perfect output is reduced to imperfect results.
So: is it possible to layout multiple PDF pictures inside one PDF entity for printing purposes such that the original output is not distorted?
I have in the past put pages in front or behind other pages but cannot find any references or code that works with Pro 9 nor indeed the manual way to insert PDF pages at any location on a single PDF Page?
I'll try and explain. My template coud consist of 6 boxes on a single A4 page thus:
My base PDF Page (can be thought of as a template - ideally it wont be printed - but even if it is - it wont be printed on any media material) has 6 areas (any number of areas up to 100) on it. In each area, there is a box. It is within these boxes that I wish to place a PDF Picture. Not all pictures will be the same. How can I do that? Ideally I'd like some example C# code - though doing it as a user will suffice, for now.
Is there a way of programmatically selecting each of the above boxes on the base PDF Document?
I do know of one manual method (though it seems long winded) and it is not accurate enough in that (even though the layers are deselected) - the hidden layers are subsequently outputed too - not good!
Uses a button icon over each box.
All the current Adobe help for the SDK refers to Pro 8 and previously - which all seems to have now been replaced in Pro 9
This question will be placed in the Developer & User Forums - as it pertains to both.
Thankyou in advance for anyone that either knows any workarounds or any ways to affect a solution.

Picture of what I want to see:
What I get, and don't want to see is:
The PDF was generated using Adobe Acrobat Pro 9 from an AutoCAD LT (DWG) file without AutoCAD being present but making use of a plot configuration (PC3) file & pen table (CTB) file. The resultant file [WhatIWantToSee.pdf] is perfect - all the lines are the right thickness & colour and are perfect vectors (with no construction / proofing layers visible). When you view that file in Acrobat and show the "Layers" property box, you see that the correct number of layers whilst are still present are indeed turned off.
However, when I add a forms-button to one of the rectangles (please refer to initial post - where there are 6 rectangles), and display same file as icon display. The resultant view is the one shown above named [ What I get and don't want to see]. It seems the saved layer settings are all ignored?
I generated the PDF file through Adobe Acrobat Pro 9 Menu | File | Create PDF | From File (Files of type Autodesk) | Options | Selected Layers | Layout | Last Active Layout.
Rectangles are regular content elements - not fields (in the general meaning of form-fields).

How do I combine two or more pictures into one?

How do I combine two or more pictures into one?

I found out how to do what I wanted and I'm giving my steps in hopes that it might help someone else. I wanted to put several photos from a file onto a new blank image. This is what I did.
1. Create a blank page.    File/New/ Blank File.   Put in the size. I used 8x10.
2. Bring the photo you want to use into Elements as you always do. It will list along the top next to the blank sheet.
3. Choose SELECT (top of screen)/ Select All.
4. Choose Edit/Copy   or Command "C"
5. Click on the Blank File.   Chose Edit/Paste or Command "V"
6. Click on Image/ Transform or Command "T". There should be a dotted line around your pasted image. You can then move and adjust the image to how you want it. When finished, press the check-mark on lower right of photo.
7.   Repeat this with all the photos you want on the new blank file.
8. You will see on lower right of Elements, the background layer and as many layers as you have photos. These layers need to be permanently placed on the background layer. Go to Layers and press Merge Visible. This will merge all layers to the background.
9. Save as and you are done.

How can I put up more pictures besides 3?

I was wondering how I could put more pictures up instead of 3.
I can put as many pictures as I want on the photo's page but it will only let me put 3 in the little box where photos can go.
Here is my website so you can see what I want.
http://web.mac.com/saminman2/iWeb/Site%202/Welcome.html
I know I am sound confusing but all I want to do is to make every picture clickable so you can view them in a larger picture and to view them in a slideshow.
Thanks,
Sam

Hi Sam,
Just drag in some more photos and hover right over where the three photos are right now. You will see a blue outline around all three photos and the cursor will turn into a green "plus" sign. Then drop your photos. The page will automatically expand and the new photos will be imported and thumbnails created.
But the key is to drag your photos OVER the three existing photos and wait for the blue "bounding box" and the green "plus" cursor to appear.

Merge more pictures into one automatically

Hi there!
I was doing this manually yesterday and was wondering if there was an easier way to do it.
I have som pictures, most 2-4 pictures that has to be merged down to one specific sized photo.
The size is 450 width and 680 height
The way I'm doing it now is >
1. A document which i 450x680px
2. Finding the packshot and place it
3. finding the next packshot and place it so it doesn't overlay the other picture
4. maybe one or 2 more
5. save as jpeg
I was thinking > if I could choose these packshot in bridge and run an action in the specific size (450x680) instead of loading the pictures manually...or maybe some script?
The packshots comes with path.
Hope you can help!

Kirikokos wrote:
Hi there!
I was doing this manually yesterday and was wondering if there was an easier way to do it.
I have som pictures, most 2-4 pictures that has to be merged down to one specific sized photo.
The size is 450 width and 680 height
The way I'm doing it now is >
1. A document which i 450x680px
2. Finding the packshot and place it
3. finding the next packshot and place it so it doesn't overlay the other picture
4. maybe one or 2 more
5. save as jpeg
I was thinking > if I could choose these packshot in bridge and run an action in the specific size (450x680) instead of loading the pictures manually...or maybe some script?
The packshots comes with path.
Hope you can help!
The 45:68 portrait aspect ratio is a bit odd. Do you want imaged cropped or distorted into that aspect ratio? What size document do you want to create. Do you want spacing between images or not? Most likely if you can not find something to do what you want in Photoshop you can write a Photoshop script to automate your process.
You may want to look a my Paste Image Roll Script

HT2518 After using Migrate Assistant, I made several accounts for every attempt to migrate files from PC to Mac. How can I put all accounts together into one? How can I transfer the files from the other accounts to my primary account?

Okay, so I did the entire Migrate Assistant process to transfer all my files and what not to my MacBook. Problem is that I did it on seperate occasions and now I have several accounts.
How can I transfer my files from the other accounts to my primary account and delete the other accounts?

Problem is that I did it on seperate occasions and now I have several accounts.
If you had read carefully, Migration Assistant asks what you want to do in this event. That would have precluded the redundancy.
Part of the fundamental design of OS X is to separate user accounts so that one user can't interfere with another. It's not possible to directly merge an account with another, but you can copy whatever you need to the Shared folder - it is in your Users folder.
Log in to one account, prefereably a smaller one, and drag the files and folders into Shared. Log out, log into the account you want to be "primary" and drag the files from Shared into their appropriate locations. When you have copied everything you need delete the redundant account.
Do this for each of them.
Or, you can just run Migration Assistant again and follow the prompts that address the situation you described. It involves creating a secondary, temporary account from which you can administer the transfer. When it is complete you delete the temporary account(s).

FCP 10.1.3 multiple graphic images into one frame

Hi - How do I put multiple graphic images into one frame? - so it kind of looks like a video wall - except these are still images. I can do it manually but it's not precise. Anyone found a way other than this? Thanks.

Here is my quick and dirty generator called "9 Pictures": https://www.dropbox.com/s/92c536wgesh2yzj/9%20Pictures.zip?dl=0
To install it, unzip the file and place the folder inside /Users/yourname/Movies/Motion Templates/Generators
It will look like this in FCP X. You just have to click each drop zone icon in the inspector and then select the desired clip from the browser. Use the Pan and Scale controls in the inspector to select which part of each image you want to use. Note: this was done in the hope that it may be helpful, but it is no more than a quick thing. You can also control-click the generator in the generator browser and choose open in motion (if you have it) to see how it was done and to modify it.

Can you import more pictures into a photo book that is already in work?

Can you import more pictures into a photo book that is already in work? I have already spent many hours trying to create a photo album but came across more pictures to choose from. However, I don't know how to get these new pictures into the "list" of potential photos for the book in progress. I can't stand the thought of having to start over by selecting the 2000 photos plus these new ones and starting all over again!?!

I have found more pictures that I want to include. They are, say, in a folder on my desktop. I can't simply pull a picture (or the folder) from the desktop and insert it into the album or the list of potential pictures across the top.
to import into an existing book (which is just a special kind of album) simply drag the photos from their source (the desktop in your example) to the book in the source pane on the left (not to the book in the library window but the book icon in the source pane
Likewise to use photos from your iPhoto library just drag them from the library to the book
I also tried imported the pictures, from the desktop folder, into iphoto, creating new event. I don't think there is a way of accessing that new event from the album in work/progress.
Likewise to use photos from your iPhoto library just drag them from the library to the book in the source pane on the left
I also tried merging the new "event" into an existing event that I had selected for the album. That doesn't work either???
That is correct - there is no connection between the source of the book and the book - the book stands alone and you add direct to it in the source pane exactly as you would add to any other album
LN

HT201263 how do you put an iphone 4 into recovery mode

how do you put an iphone 4 into recovery mode

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
    If this method does not work, then you will need to fully Restore your
    device as New
Also, see iTunes- Restoring iOS software.
If none of the above do what you need, then do the following:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
   1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
       other end of the cable connected to your computer's USB port.
   2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
       until the red slider appears, then slide the slider. Wait for the device to turn off.
              * If you cannot turn off the device using the slider, press and hold the
                Sleep/Wake and Home buttons at the same time. When the device turns off,
                release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
       device. The device should turn on. Note: If you see the battery charge warning,
       let the device charge for at least ten minutes to ensure that the battery has some
       charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
       When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

How do you put safari web pages into icloud with the safari iCloud button?

how do you put safari web pages into icloud with the safari iCloud button?

What that button does is sync your tabs between your devices. So if you have multiple macs with Mountain Lion and/or devices with iOS 6 (once it comes out this fall) you can pick up where you left off. For example, let's say I have apple.com, nytimes.com, and facebook.com open on my mac, but I need to run. Later, if I need to use another computer in my household, I can just restore the tabs that I was using before on this other mac.

HT4528 How do I back up my pictures into my itunes account so I can transfer them to my new iphone?

How do I back up my pictures into my itunes account so I can transer them to my new iphone?

See Here > Importing photos to your computer
From Here > http://support.apple.com/kb/HT4236
Also See > Old Phone to New Phone
http://support.apple.com/kb/HT2109

How do i put a profile picture on my mail

how do i put a profile picture on my mail

There is no option to put a custom icon on Guest. By default it's a generic icon.

How do I put recovery files back into ASM?

I'm trying to recover a database for testing. I have all the backup files in a directory. I've restored the controlfile.
When I run the restore, the error is:
RMAN-03002: failure of restore command at 10/21/2009 19:24:52
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
I'm guessing that I either need to tell rman where to find the files or put the files back into the ASM +FLASHBACK.
So 1) How do I tell rman that the files are now in a directory
or 2) How do I put the files back into ASM?
Thanks - JR

I restored the control file with the rman "RESTORE CONTROLFILE FROM 'filenamegoeshere'; It was the control file backup from the corresponding DB backup.
I couldn't use the RESTORE CONTROLFILE FROM AUTOBACKUP because it was expecting the backup files to be in the ASM +FLASHBACK.
The catalog lists all the files that I have, but it thinks they are in ASM.
Thanks - JR

How do I download my Nikons pictures into Elements?

How do I download my Nikons pictures into Elements?

Hi,
Insufficient data to give a precise answer.
Which operating system are you running on?
Which version of Photoshop Elements are you using?
Which camera model are the images from?
If you are shooting in raw (NEF) format it depends very much on the version of elements and the camera model.
This might help if you are new to elements
http://tv.adobe.com/watch/learn-photoshop-elements-12/importing-photos-from-a-camera/
Brian

How can I put a selected picture in multiple places in slideshow

As the heading states: how can I put a selected picture in multiple places in slideshow
There is a slideshow with 50 pics. I want to use one of these pics in several places, in the front, middle, middle end and then the end.
How can I place this pic in multiple locations in the slideshow
redundently stated I know

Dah!!!
Thanks so much,
I was unaware of that feature, it works.

How do I put 2 or more pictures into one frame?

Similar Messages

Maybe you are looking for