How do I put a picture in Final Cut Pro X's Stats title?

Hey! How do I put a pictures on these two little gray boxes, on the Stats generator?

In the Title tab of the Inspector, under Published Parameters,  there are two drop zone wells. Click in one and then select your source clip from the browser or Time line…then the other.
Russ

Similar Messages

  • I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • How to switch to older version of final cut pro x from 10.1.2?

    How to switch to previous version of Final cut pro X after once it is updated to 10.1.2?

    M. Stochholm wrote:
    This project plays 1:50:00.
    Kindly
    Michael
    Not sure what that means…1 minute  and 50 seconds? Or 1 hour and 50 minutes?
    Russ

  • How do I export a project from Final Cut Pro onto my desktop?

    How do I export a project from Final Cut Pro to my desktop as a movie?

    Can anyone please help me.. when I click on my timeline in my project library and try to export movie nothing happens! and when I  try to "share" to youtube I get an error message stating that it cannot be exported because it contains "no video"... The 4 minute music video that I've created with shots off my Canon T2i looks and plays great....If I uploaded the videos into Final Cut but did not save them on my desktop or anywhere else on the Mac would this be a reason to get this message? I have never experienced this before...the only option under "share" that works is "email"
    [email protected]

  • How do I make a pic in final cut Pro stop  flickering?

    how do I make a pic in final cut Pro stop  flickering?

    Question: how do I make a pic in final cut Pro stop  flickering?
    Answer: It depends on what is causing the flickering.  It could be due to the pixel dimensions being too large for the Sequence settings in FCP.  It could be due to thin horizontal lines in the image.  It could be due to areas of the image in high contrast with each other.   Or it could be due to a combination of several factors.
    If the image is too large, reduce the pixel dimensions to a more reasonable size.
    If it's due to thin horizontal lines, deinterlace the image, or slightly blur the lines in Photoshop.
    If it's due to areas of high contrrast, reduce the contrast of those areas in Photoshop.
    In FCP you can also try applying the Flicker filter to the image in the Timeline and/or a Gaussian blur filter with a setting of around 0.2 or 0.3
    -DH

  • How do use the hum remover in final cut pro 5? Help

    How do use the hum remover in final cut pro 5? Help!!

    Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
    Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
    Trevor

  • Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image?

    Animation. How do I import still images in final cut pro x (from dragon frame) duration 3 frames pr. image? We have allready tried to set stillimages duration in preferences to 0,08 sek, but it does not have any effect!

    You can drag your images to the timeline, select all, ctrl-d and set the duration to 3 frames by typing 3 and enter.
    Or you can use Quicktime 7 to "open image sequence", select the desired duration, export your animation to quicktime and import that into FCP X for further editing.

  • How do i burn a dvd using final cut pro x

    how do i burn a dvd using final cut pro x?

    Use the Share button at the far right end of the Toolbar or File>Share>DVD.

  • How to work on TOD files on Final Cut Pro

    Hi,
    I can't figure out how to work on .TOD files on Final Cut Pro. I'm using a JVC Everio HD40 camera. None of the sequence presets work. Is there a plug-in or something else I could try?
    Thanks for any help!

    .TOD is JVCs version of an MPEG 2 file.
    Use Log and Transfer from the File menu and convert to ProRes.

  • How do I stabilize a timelapse on final cut pro?

    How do I stabilize a timelapse on final cut pro? I took a time-lapse in a car, and the footage is shaky so I would like to stable it, I have created a compound clip with all the images that make up the time-lapse, but stabilization does not show up as an option. Can anyone help?

    danidando wrote:
    … I don't have and don't want to buy Compressor or Steeamclip or Motion?
    Mpeg Streamclip is free, well&widely recommended ...

  • Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

    Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

    If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

  • SCANNING PICTURES TO FINAL CUT PRO

    I don't know if this is the best place to post this but I am scanning pictures to put into final cut pro to do a montage, what is the best dpi to use for scanning pictures, when I put it in final cut I need to enlarge them a little but then it seems to pixalize the picture.

    to Ymir
    'Just like this site to tell you how to build a clock when you simply ask what time it is.'
    well its 15 degrees centigrade here, what time is it with you?
    so how does this help Bill when he asks for some help with scanning?
    well it would help to provide the correct measuring system for a start. In this case it would be pixels for the frame size he is using and definatly not dpi
    'I make photo montages all the time and I scan at 72 dpi.'
    Your workflow may well end up with an adequate result for your situation, but how can that possibly help anyone else? Stating you scan at 72dpi is meaningless when you know nothing about the posters requirements or set up.
    what is being scanned, a transparency a print?
    what size is the original?
    what is the optical resolution of the original?
    what equipment is being used?
    what is the final frame size required, is it SD or HD-DV NTSC or PAL?
    To Bill I would suggest; simply scan the originals to produce a file at the video frame size your working on; for example, if it is for PAL DV video it would be 720x576 or 720x480 for NTSC DV. You may want to scan for a larger frame size to allow for enlarging or positioning the image.
    refer to the Final Cut Pro Manual vol III page 339 which explains all the above.
    G

  • How can I import DVD footage in Final Cut Pro X

    I want to edit a showreel of my own work in Final Cut Pro X (version 10.1.4). A lot of my old footage is only available on DVD. I need to get this footage into Final Cut Pro X but don't know how to do this. There are programs to convert DVD to DV but I don't know which one to use, and how to use them.

    The script provided by MPEG Streamclip worked for me.
    But there is an alternate way, which is basically doing by hand what the script does.
    The actual component that is needed is stored inside an archive file in the inside the package. This file needs to be copied to a place where the system can see it.
    Here are detailed instructions. Be sure you fully understand before putting any files in the Library folders, as described below. No guarantees, but if followed correctly I believe this works.
    1) Double-click the .dmg file.
    2) Inside there are two folders. Open the one that says "For Quicktime 6.4 or later..."
    3) Control-click the QuickTimeMPEG32.pkg and choose "Show Package Contents".
    4) Copy the file "Archive.pax.gz" somewhere else on your mac - I will use the Desktop as an example.
    5) Double click the copy of "Archive.pax.gz" on your desktop. It will expand and create a folder on the desktop called "System".
    6) Inside the folder called "System" is a folder "Library" and then "Quicktime", with a single file called "QuickTimeMPEG2.component".
    This is the file that MPEG Streamclip needs!
    7) I suggest you place this file in your own user's Library. To do this, hold down the option key and select Library from the Go menu in the Finder. There, if it does not exist already, create a folder "QuickTime" and copy the component there. This should work.
    Note: the script actually places the component in a different location - one which I think should not be messed with (inside /System/Library).
    I think it should work in the user's Library, but if not I would put in /Library (the Library at the root of the drive) before trying the location above.

  • How to import unix executable files into Final Cut Pro

    A friend wanted me to create a Halo 3 Montage Video for him. He loaded the saved clips onto a flash drive for me but when I put it into my computer the information comes up as Unix Executable Files and I don't know how to import them into Final Cut Pro 7.0.2 or if it's even possible. Any help would be much appreciated. Thanks.

    Ok. Well, I plug in the flash drive. When it opens there's a folder that says XBox360. When I click on the folder there are 9 files listed that say Data0000, Data0001 etc. The preview option shows a gray folder that says Exec on it and the only information I can find is that it's a Unix Executable File. When I click on more info option everything that pops up is what I've already told you. I tried opening it in the VLC Player but nothing played which makes me think there aren't video files on the flash drive. When I click on the file to open it the Terminal Program appears and lists basic information about the file.
    Is there a program that can take these files and covert them into something that can run in Final Cut Pro? Or is that what VLC is supposed to do?

  • Picture-in-Picture within Final Cut Pro.

    I'm having a hard time figuring out how to display 2 videos playing simultaneously within FCP.
    I believe it may have something to do with frames but I can't seem to solve my problem.
    For example:
    I would like to have a video playing, then I would like that video to shrink down smoothly to about a third of the screen and have a separate video playing in the space that the last video was playing.
    A pretty good example is the RT Extreme video one the the FCP site: http://www.apple.com/finalcutstudio/quicktours/
    Any help would be greatly appreciated. Thanks a lot.
    Final Cut Pro 5   Mac OS X (10.4.8)  

    1. Put the video that shrinks on Track 2.
    2. Put the other video clip underneath it on Track
    1.
    3. Animate Track 2 using motion keyframes. When track
    2 shrinks, it will reveal track 1 behind it.
    So you need to use motion in order to accomplish this or is there a way to do this directly within FCP?

Maybe you are looking for

  • Visa write problem

    hello, I am trying to control a Coherent Cube laser with labview 8.0 (RS232) I always get the response 'invalid cmd' from the laser. There is a software furnished by Coherent which works without any problem. I monitored the datas sent by this softwar

  • Iphone 4S keeps falling from flat surfaces

    I have an iphone 4s replaced using my insurance after the previous one got broken by accident. This new iphone keeps falling from flat surfaces. After the first time, I placed it back just to  check how could it fall, and I could see that the phone w

  • Question re: purpose of webservice URL

    Hi. I am slowly going through the VideoPhoneLabs example. Trying to figure out the line of code below at the start of the <mx:Script> block...there doesn't seem to be any other references to the WebServiceUrl in the project so not sure what the purpo

  • Share Individual Folders & Retain Directory Structure

    Hello. I'm currently sharing an external raid array on my Mac Mini running OSX Server. My company's files are stored here, split up by LLC, then department. I want to create users/user groups to give limited access to certain areas. However, despite

  • Problems with the apps in iOS7

    Hi, I downloaded iOS 7 on my iPod touch 5g, and everything was working perfect but now I have problems with most of my apps, Facebook, Twitter (both iOS 7 version) Instagram, Safari, some games and even my camera... I open them, thy work, and then th