How do I put a URL into :APP_USER

I have to capture a user name which is in the url in the :app_user var, can I do that?

Create a favicon.ico file and put it in the root folder, use this site to make one from an existing image file
Flush your browser cache, it won't appear right away but will show after a few loads

Similar Messages

  • While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

    While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

    Same here. I just posted a question too.

  • How do i put multiple albums into one huge album collection?

    How do i put multiple albums into one huge album collection?
    Some examples include: Linkin Park - Studio Collection, Michael Jackson - The Indisposable Collection

    Hi skullkrunch3r,
    Thanks for visiting Apple Support Communities.
    If you "Get Info" on the tracks that are part of your collection, you can use the Compilation option in iTunes.
    In iTunes 8 and later, you find the option to mark multiple items as "Part of a compilation" in the Options tab of the Multiple Item Information window.
    See this article for more information on marking your albums as part of a compilation:
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Best Regards,
    Jeremy

  • How do I put a logo into the address line of my browser?

    How do I put a logo into my site so that it shows up on the browser address line at the top of the page?

    Create a favicon.ico file and put it in the root folder, use this site to make one from an existing image file
    Flush your browser cache, it won't appear right away but will show after a few loads

  • How can i put one scene into JPanel of the swing?

    how can i put one scene into JPanel of the swing?

    980571 wrote:
    ty for the information but i have a problen with JFXpanel when i try to into a panel it doesnt display insideSorry to hear that. If you want assistance with the code, feel free to post the relevant parts of it. Make sure to use \ tags when you do.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How can I put my bookmarks into the sequence I want, alphabetical or otherwise?

    How can I put my bookmarks into the sequence I want, alphabetical or otherwise?

    http://kb.mozillazine.org/Sorting_bookmarks_alphabetically <br />
    http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox

  • How do you put a flashdrive into a computer? What if it's not working?

    How do you put a flashdrive into a iMac desktop? What if it's not working?

    Is it a new flash drive?
    Used on another machine?  What os on this machine?
    Do you get any error messages?
    Should appear as an icon on the desktop.
    finder > preferences

  • How can i put below  table into internalt table

    how can i put below  table into internalt table and want to add both internal table into 3rd internal table.
    SELECT  * FROM J_1IEXCHDR  WHERE STATUS = 'P'.
    WRITE: / J_1IEXCHDR-LIFNR,
              J_1IEXCHDR-DOCNO,
              J_1IEXCHDR-EXYEAR,
              J_1IEXCHDR-BUDAT.
    SELECT * FROM J_1IEXCDTL  WHERE TRNTYP = J_1IEXCHDR-TRNTYP
                              AND DOCYR  = J_1IEXCHDR-DOCYR
                              AND DOCNO  = J_1IEXCHDR-DOCNO.
       WRITE: / J_1IEXCDTL-EXBAS,
                J_1IEXCDTL-EXBED,
                J_1IEXCDTL-RDOC1,
                J_1IEXCDTL-ECS.
    ENDSELECT.
    ENDSELECT.
    please help
    thanks in adavaced.

    hi laxman,
    use for all entries and get the required data.
    SELECT * FROM J_1IEXCHDR into table itab1 WHERE STATUS = 'P'.
    if not itab1[] is initial.
    SELECT * FROM J_1IEXCDTL into table itab2 for all entries in itab1 WHERE TRNTYP = itab1-TRNTYP
    AND DOCYR = itab1-DOCYR
    AND DOCNO = itab1-DOCNO.
    endif.
    so itab2 will have the common records...This will solve ur problem..
    also u can do other method declare an final internal table with the common fields of the two internal table.
    then after getting data in itab1 and itab2.
    loop at itab1.
    move-corresponding itab1 to itab3.
    read table itab2 with key <give the fields> = ......
    if sy-subrc eq 0.
    move-corresponding itab2 to itab3.
    endif.
    append itab3.
    endloop.
    Regards,
    nagaraj

  • TS1463 how do you put the ipod into disk mode

    how do you put the ipod into disk mode

    iPod nano (7th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Home buttons simultaneously until the display turns black. This should take about eight seconds.
    When the display turns black, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    iPod nano (6th generation)
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
    When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
    iPod devices with a Click Wheel
    If necessary, verify that your iPod has a Click Wheel.
    Before placing the iPod into Disk Mode, verify that it is charged.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
    When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
    If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
    Older iPod models without a Click Wheel
    Before placing the iPod into Disk Mode, verify that it has a charge.
    Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
    Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
    When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
    Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
    source: Putting iPod into Disk Mode

  • How do I put this output into a table ?

    I query a table and output using the following :
    <cfoutput query="qryAreas"
    group="state">#state#<br>
    <cfoutput
    group="city"> #site#<br><cfoutput>  #zipcode#<br></cfoutput><p>
    </cfoutput>
    </cfoutput>
    Since this is dynamic, the output gives me one column all the
    way down to the end of the page/screen.
    How do I dynamically output this into a table with two or
    three columns, displaying the same data as above ?
    I can probably do individual queries and put each one into a
    <td> but there has to be a better way to do this
    dynamically.

    My current output, without table, list the first state, then
    the first city under that state, then all zipcode for that city. It
    then list the second city for that state and all zipcodes for that
    city, When all the cities are exhausted for that state, it skips a
    line and then lists the next state, city, etc., and starts the
    process all over again. It gives me one column to the end of the
    screen.
    So for each td, I would like to have the state, the cities
    and zipcode, then the next td would have the next state, all cites
    and zipcodes, etc. I would not know how many states are in the
    table, so each td should contain a state.

  • How do I put synched songs into playlists via icloud? (without a computer)

    Now that synching is over the air, how does one put songs downloaded on to a Mac into a playlist on an iPhone? (or vice versa}? This is easy through iTunes with a wired synch, but I don't know how to do it if there is no "mother" iTunes app open, as OTA.
    Thanks.

    You can also create playlists on the phone/ipod app. Go to "playlists", tap on "create new playlist" give it a name and add the songs.

  • How do I fire a URL into QuickTime from a web page?

    Looking at the Apple trailer site and I like the way that if you view a HD trailer it loads QuickTime and opens the video straight into QuickTime
    Now I assume it's sending the URL of the MOV file to QuickTime to play.
    How can I make a link from a HTML page send the URL into QuickTime to replicate the same way to run a video.
    At the moment I build "pop up" windows to display movies in, and I think using QuickTime in this way will be better so if someone has popups blocked my movies will still play.
    It must be simple to do.
    I once did a site for someone that need a podcast and I got it to send it to iTunes. But I cant seem to see how to do the same for a movie to QuickTime
    R

    http://homepage.mac.com/kkirkster/03war/
    The technique is known as Poster Movies. A tiny image file saved as .mov file that can either act as a "placeholder" (target="myself") or act like a "link" (target="quicktimeplayer").
    http://www.qtbridge.com/pageot/pageot.html
    Free software to help write the proper page code.
    Another method is a QuickTime Media Link (.qtl file). These tiny text based files can be placed anywhere in a Web page and will always download (Mac or PC) and will launch the QuickTime Player.
    http://homepage.mac.com/kkirkster/.Public/wwdc_keynote.qtl
    One of mine as an example.

  • How can I put my system into StandBy Mode?

    Hi
    I am not able to put my system into stanby mode.
    How can I do that?

    Hi
    As Ivan said you can use these two options.
    Furthermore I would recommend checking the settings in the Toshiba power saver (if is installed)
    Possibly you have to activate this option before using.

  • How can I put the signature into the data file.

    Hi all,
    I want to put the signature into the data file, mean the data file will be on the top and the signature will be at the buttom.how can i do that?
    Thanks.
    example:-
    dataFile.txt
    Name=...
    Address=...
    Signature=6A07C70E....123FEAB(Hex)

    Thanks for your reply.
    First, i have a keypair (public key and private key).
    I use the private key to initialize the Signature and
    use the Signature to sign a data file ( dataFile.txt) .
    So when i need to comfirm the data file not being modify
    I have to verify the data file with the Signature and the public key.
    I hardcoded the public key in my program so my client (receiver of data)
    need only the Signature file and the data file (2 files).
    So how can i combine the Signature file and the data file into 1 file?

  • How do I put video footage into itunes so I can then put it on my ipod?

    Hey guys,
    I got an ipod nano 3rd gen for Xmas, and although I have sort of worked out how to put songs on it, and some photos, I would like to put some footage of my children on there. My video files are all .MVI
    The problem is firstly I think I have to convert them to a certain file?? And then how do I put them into itunes? I am having so much trouble with it all, I just feel like taking the silly thing back to the shops. It works fine, but am having a huge amount of trouble trying to figure everything out.....

    Niel - Thank You!!! It has worked....finally....
    But now that I have converted the clip to sucessfully play via Quicktime, and managed to somehow get it into itunes, when I click and darg it over, it says it cannot be played on my ipod and so I have right clikced and selected Convert t Play on Ipod. Will see how that goes and let you know if it was successful.
    I thought that by converting it with The MPEG Streamclip, it would automatically work.
    Errghhh, I hate all this stuff!

Maybe you are looking for