How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

TC has not been lost...skimmer shows source TC.
Nanoflash external recorder via SDI on a Sony PMW-EX3.
Ok so Compressor will show source TC on an individual clip, good I didn't know this and it will be helpful.
My scenario. I build a timeline with a whole days shooting involving many different clips and build a Sequence from that-editing out the off camera questions/mistakes etc. In the past I would export with source TC with a Timecode Reader filter applied. Now, it is a TC Generator filter that is available that starts from 00:00.
1. Possible solution, forget the source TC since I have a timeline built with (counter) TC on it and send that to client or get Apple to add it in the future.
2. Apply TC Generator on a clip by clip basis and manually change the TC to match source material. Probably too, much effort though.
Chris

Similar Messages

The Touch ID symbol has disappeared off the Lock Screen of my iPhone 5S since upgrading to IOS 7.1. Is any one else experiencing this. Any recommendations for fixes?

The Touch ID symbol has disappeared off the Lock Screen of my iPhone 5S since upgrading to IOS 7.1. Is any one else experiencing this. Any recommendations for fixes? The finger scan in Settings seems to be working OK for me.

Hello there, cruzrt.
The following Knowledge Base article offers up some great steps to try for troubleshooting issues with an iOS device not responding:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

TS3988 trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

trying to buy more storage on the cloud, response is 'there was a problem - try again later' its been doing this over the last two hours - any ideas what the 'problem' is please (assuming its not me) - thanks

Additional info on this:
I strongly suspect this is time machine-related. Even though time machine has been turned off, this happens at intervals of exactly one hour.
A single entry appears in the kernel log at the precise moment the (first) popup error box appears. This is:
"AppleSRP started."
Anyone have any clue how to go about diagnosing or fixing this? I don't even mind trying something brute force (short of wiping the HD and reinstalling lion, which I really DON'T want to do; I don't mind a non-destructive reinstall).

Can someone please tell me on how to modify this code so that I dont have to enter the file name at all?

Hello
can someone please tell me how to modify this code so that I dont have to enter the file path at all? When i give the same file path constants to both the read and write VIs I'm getting an error message.
Attachments:
read and write.vi ‏11 KB

Yup use the low level File I/O opening the reference once, and closing it once.
As for the path selection you have an unwired input which is the path to use. Programatically set that and you won't be prompted to select a path. Usually this is done with a path constant to a folder, then using the Build Path, to set the file name in that folder.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

In Snow Leopard, there was a quick look feature that allowed you to look at files without opening the program. It doesn't show up in Lion on my iMac. Any ideas? Thanks

In Snow Leopard, there was a quick look feature that allowed you to look at files without opening the program. It doesn't show up in Lion on my iMac. Any ideas? Thanks

While in Finder, select the file (click on its icon once) then press the Spacebar.

How do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

jen19 wrote:
how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
Just buy something.

How can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

how can i get option to approve or reject an emial in outlook in mac such that once i click on approve, the email is sent and if i click on reject it goes to sender (within our workgroup), i used to have it in windows

Better ask on the Microsoft forums where the Office experts hang out as it's Microsofts product you're have questions about
http://answers.microsoft.com/en-us/mac

How can I sync my iphone songs to a new library without losing the songs on my iphone. I no longer have access to the old library as it was on a company computer that I no longer work for.

how can I sync my iphone songs to a new library without losing the songs on my iphone. I no longer have access to the old library as it was on a company computer that I no longer work for.

Third Party software do a google search

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.

How can I find the location of an i-pod shuffle, nano and touch that i have synced to my account? I have had each one stolen and would be so relieved if i could track there location as I know they are still in the county I live.
Also if i cant locate them can i at least remotely delete the libraries, and lock them so they are unusable to the thiefs, and i had a sony laptop worth £2000 stolen which I had used my apple account for a year is there anyway i can track that or retrieve the contents and delete them?
Please if anybody knows reply or contact me!!!! =-)
many thanks

You or Apple can do nothing to prevent use of the devices.
For the iPod touch if you turned on the FindMyiPod feature and wifi is on and connected yu may be ablt ot locate it and wipe it by going to iCloud, signing in and going to FindMyiPhone. However, if the iPOd is rectored that feature is deleted.
Report to police and change the passwords for all accounts used on the iPod.

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

There was a button/plug in that alloyou to search and dowmload MP3 from the tool bar it is no longer there how can I find it?

The add-on you are looking for may no longer be available.
Do you remember its name?
Go to the '''[https://addons.mozilla.org/en-US/firefox/ Mozilla Add-ons Web Page]''' {web link}
(There’s a lot of good stuff here) and search for what you want.

Event ID 1012 - There was an error while attempting to read the local hosts file

When I start my Computer after it has been turned off overnight (switched off at the Power supply) I get a Blue screen and have to reboot the PC. in the Event log it has this error: Event ID 1012 - DNS client events - There was an error while attempting
to read the local hosts file.
Once the PC has booted evrything is O.K. I can restart the PC with no problems, it only seems to happen if the PC has been switched off for a while.
I am connected to the net via an Netgear dg834v4 Modem/Router
Windows 7 Ultimate
Intel Q8200 CPU
2 x 360 Gb HDD
ATI 4680 !Gb Video Card
Digital HDA X-Mystique 7.1 Sound Card
Aver media 777 TV Tuner card.
Thank you
jeepers01
After further Investigation it seems that this error is Not responsible for my Blue screening......I started my PC after leaving it off all night, and it started normally, but i still have this error in the Event Log - System.....I have searched the Technet
forums (and there is a lot of ID 1012 errors) but non relating to my problem....If anyone knows what is causing this error and how to fix it, i'd be Grateful....although it does not seem to affect the PC in any way that i can see.
thanks
jeepers01

Since Windows system uses separated user mode and kernel mode memory space, stop errors are always caused by kernel portion components, such as a third-party device drivers, backup software or anti-virus services (buggy services).
The system goes to a BSOD because there is some exceptions happened in the kernel (either the device driver errors or the service errors), and Windows implements this mechanism: When it detects some errors occur in the kernel, it will kill the box in case
some more severe damage happens. Then we get a blue screen or the system reboots (it depends on what the system settings are).
To troubleshoot this kind of kernel crash issue, we need to debug the crashed system dump. Unfortunately, debugging is beyond what we can do in the forum. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that
a dedicated Support Professional can assist with your request. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
Microsoft - Help and Support
If you are outside the US please see
Microsoft Worldwide Home for regional support phone numbers.
Meantime we can try some available steps as a general troubleshoot.
1. Please remove the antivirus and run the system with a period. If the issue does not occur, mainly focus on antivirus settings and compatibility.
2. Disable Automatic Restart and see detail information on the blue screen.
1).Click Start, in the Start Search box enter sysdm.cpl.
2).Click the tab Advanced. Under Startup and Recovery, click the Settings button.
3). Uncheck “Automatically restart”.
4). On the drop-down menu “Write debugging information”, choose “Small memory dump”.
5). Click OK.
When Blue Screen displays, you may find some useful information.
Arthur Xie - MSFT

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

What is the latest update available for Mac OSX 10.5.8 that will allow me to get the latest update for iTunes. I really need to update my iPhone and CAN'T!! GRRRR!!!

Minimally you need Snow Leopard or greater:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion — System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

HT1212 my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft

my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft copy of the ios on my windows pc. please how can i reload my ipad

Try using recovery mode
Recovery mode - Support - Apple

I've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?

i've lost my iphone with passcode lock and find my iphone lock on but the wifi n cellular data was turned off so no way i can trace it so the only question remains is will the person who finds it be able to unlock it and use it as his own ?
is it possible to change imei number?
i've tried for so many times n still the phone is offline so i've set it to offline mode with my message but it never shows the last location why?

If the device is found, nobody can use it without knowing your Apple ID and password.
The phone will only show it's location if it is connected to cellular network or Wi-Fi. If those options are switched off, you can't locate the phone.
With iOS 7, Find My iPhone includes a new feature called Activation Lock, which is designed to prevent anyone else from using your iPhone, iPad, or iPod touch if you ever lose it. It starts working the moment you turn on Find My iPhone in iOS 7. With Activation Lock, your Apple ID and password will be required before anyone can:
Turn off Find My iPhone on your device
Erase your device
Reactivate and use your device
This can help you keep your device secure, even if it is in the wrong hands, and can improve your chances of recovering it. Even if you erase your device remotely, Activation Lock can continue to deter anyone from reactivating your device without your permission. All you need to do is keep Find My iPhone turned on, andremember your Apple ID and password.
What steps should I take if I misplace my device?
If you ever misplace your device—whether it’s just lost or you think it may have been stolen—you should put it into Lost Mode immediately using Find My iPhone.
Lost Mode locks your screen with a four-digit passcode and lets you display a custom message with your phone number to help you get it back. You can also remotely erase your device if needed, and your custom message will continue to display even after the device is erased.
While Activation Lock works in the background to make it more difficult for someone to use or sell your missing device, Lost Mode clearly indicates to anyone who finds your device that it still belongs to you and can’t be reactivated without your password.
To put a device into Lost Mode, sign in to icloud.com/find from a Mac or PC or use the Find My iPhone iOS app.
For more information, read what to do if your device is lost or stolen.
copied from iCloud: Find My iPhone Activation Lock in iOS 7

How do I put timecode on the storyline. In FCP 7 there was a time code reader that read the actual TC on the source material. There isn't one in FCP 10.1...Any recommendations???

Similar Messages

Maybe you are looking for