How do i quit bootcamp when it say "No bootable device -- insert boot disk and press any key"
Hi,
How do i quit bootcamp when it say
"No bootable device -- insert boot disk and press any key"
cuz i resraart my imac and the nextday i went to use my imac i just say mi that.
Can you please help mi out ?
Reboot holding down the Option key between the tone and the apple logo w/pinwheel. When the boot manager gives you a selection of boot partitions, choose your Lion partition. Once booted, go to System Preferences > Startup Disk > select your Lion partition.
Regards,
Captfred
Similar Messages
-
What happened at the Apple store that caused my computer to do this.
It passed the diagnostic check with flying colors. So I got the green light from the Genius to purchase the MacBook Pro.
Got home.
Pushed power.
Screen says:
No bootable device-- insert boot disk and press any key...
What happened? He said it would be like a new MacBook Pro when I got home and turned it on. This isnt like that at all.
Someone please advise me what to do? The Apple store is closed now. :-(It's trying to boot from a Boot Camp volume that doesn't have a working installation of Windows. Restart and hold down the option key until you see one or more disk icons. Select the one representing your Mac OS boot volume and press return. When the boot is complete, open System Preferences > Startup Disk and set the Mac OS volume as the default boot device.
-
Problems with Bootcamp Assistant: no bootable device -- insert boot disk and press any key
Hello Guys,
I got a problem setting up Windows 7 on my recently bought 13" MacBook Pro (2,3Ghz Core i5).
I used the bootcamp assistent to create a partition of 50GB on my Mac, everything is fine until now. I insert the Windows 7 disk and follow the instructions. But when I restart in spite of starting the installation of Windows 7, a black screen appears with a note saying "no bootable device -- insert boot disk and press any key". To exit this screen I then have to restart my Computer again, holding down the alt-key. In the following window I can just chose my Mac-Harddrive to boot from, the partition is not shown.
I used the software actualization tool to update to version 10.6.7 which is the most recent one i think.
The Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
So as I said, I downloaded the Version of Windows 7 Professional with Service Pack 1 (x64) on my computer and then burned on a DVD. I want to add, that the file I downloaded turned out to be an iso file. At first, I just burned this file on a DVD but since it turned out that i got the above mentioned message, I burned a second DVD with the actual files of the iso (with foldernames like autorun.inf, boot, bootmgr, bootmgr.efi, efi, setup.exe, sources support, and upgrade)
I dont know if these details are of any relevance, but i guess it may be useful since I believe that the burning thing could cause the problems.
I have already browsed the Forum for quite some time now, but I didnt find a case with the exact same problem that I have, so I decided to rather ask you for help now instead of killing my brain like I did before (and I dont really have a clue neither of Macbooks nor of Windows-Computers, its always try and error for me)
I hope somebody can come up with some helpful ideas or a solution.
If you need further details on my system or anything, please feel free to ask
Thank you very much,
DavidThe Windows 7 CD I use is actually a burned one. My University is a member of the msdn academic alliance and therefore offers me to download microsoft software for my work. I stress out that this is absolutly legal, I will only be allowed to use the software unitl I finished my studyings.
Apple Disk Utility won't do a proper job and won't work (and it varies, some can start the install but fails later) Has to be burned at 2X Reduced Burn Speed
Also check the support articles for bootcamp
Apple Boot Camp Support -
Bootcamp - No bootable device -- insert boot disk and press any key help plz
Hello there!
I recently upgraded my imac mid 2010 system with a SSD hard-drive. The old "main" drive went to the place of super-drive and after reinstalling OS X into the new drive and wiping the old drive a very interesting problem happened. I started trying to install windows 7 via bootcamp. I did everything what the bootcamp assistant says and after the imac restarts itself it just says No bootable device -- insert boot disk and press any key. Firstly I thought that maybe something is wrong with the installation disk (i have an external super-drive connected to the imac). After restarting the imac once again i held down the option button and arrived to the screen, where it shows the avlaible boot options (different disks). Now, what I saw, was funny. The bootcamp assistant had'nt created the bootcamp drive at all. Atleast it did not show it. After doing this two-three times the result was the same. My next idea was that maybe, there is an issue with the concrete SSD model I am using. So I went back to OS X and opened the bootcamp assistant and restored the state of the OS X SSD drive. Next I did an bootcamp partition onto the old drive I have installed. But the result is still the same. Now my head is empty of ideas.
Has anybody had a similar problem and can you please give me tutorial what I did wrong or what to try next?
Thanks.
Indrek.Hi Michael!
Yep, I did get this running. Not in a normal way (meaning the easy way). What I did, is that I just created the BOOTCAMP partition in OS X. Just let it format and create the partition where you would install BOOTCAMP.
After that I discovered that via a ISO program (WinClone) you can directly restore a previously created OS X boot image to your current computer. So, I installed a blank Windows 7 to my macbook pro, didint install any drivers and just let it work up then. Then I went back to os X (in macbook pro) and made a bootimage for the BOOTCAMP partition. After that I saved it to my external harddrive and wired it to my iMac. In iMac I just downloaded the same boot-image program and restored the bootimage that I made in Macbook Pro to iMac. After that I made an restart and the bootcamp section with windows worked well with my iMac. Install the bootcamp soft and you can do everything and everything works. FYI, you get the windows working via those steps, BUT if you either delete or do anything to make your bootcamp partition unworkable then you will have to repeat those steps again. But it´s fast non-the-less, so it shouldn´t be a problem for you.
If you didin´t understand anything or something doesen´t add up, send me a letter or a notification.
Hope this helps.
Indrek. -
How to fix bootcamp error: No bootable device --- insert boot disk and press any key
Hi everybody,
It seems that I triggered a bootcamp "bug" that involve the malfunction of the partition hierarchy after the creation of a new partition.
After some work I managed to get back again bootcamp in bootable partitions choice window, but if i select it and reboot the system
i get this error:
No bootable device --- insert boot disk and press any key
I think something is wrong with the assignment of the bootable partition, maybe is looking for windows in the wrong partition.
Any idea?
OSX 10.10.1
Bootcamp with Win 7I have an ISO image and I burned it to a dvd. I know how to boot back into my Macintosh HD. I just need help on finishing the Windows install. On my iMac it says I have a partition named BOOTCAMP.
-
Bootcamp Win 7 No bootable device -- Insert boot disk and press any key.
Hello everybody, I bought a windows 7 to install with bootcamp in my MBP retina, it came buy post, a windows 7 ultimate, OEM, and for my surprise it came with a DELL computer reinstallation CD, well, I search the Internet and some guys were receiving the same CD, and the web sites were saying that it works perfectly. So, I started to install it with boot camp.
I format my USB 16 gig from scandisk for (DOS FAT) in utility's on my mac, and I went to BOOT CAMP to install the windows. As I have a superdrive and the CD from win 7, I didnt select the option of creating a image of windows 7 (the first option) and I just select the other two. So the bootcamp asked me to connect my USB stick for downloading the windows drivers, and after downloading he opened the partition screen, I choose 30 gig for my windows partition and pressed continue, after that the boot camp asked me if I have a windows installing cd, and I clicked yes, Next window, " If you have an installation CD the boot camp will delete the boot from your USB stick, press continue, and I did. After that my mac reboot, and now I have the message " No bootable device -- Insert boot disk and press any key"
It doesnt boot with the USB stick.
It doesnt boot with my cd
ALT CMD doesnt work.
No MAC no Windows? Sheeee
Please help me if you can.
I have done a backup before.You should take your Boot Camp discussion to the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp, where the "no bootable device" issue has been asked and answered many times.
-
"No bootable device --- insert boot disk and press any key" after setting up Bootcamp
Hi guys,
I am trying to install Windows 7 via Bootcamp but after setting up Bootcamp and restarting the computer I get the error message "No bootable device --- insert boot disk and press any key".
I use an iMac with a DIY Fusion Drive consisting of a 120 GB SSD and a 1 TB HDD.
Since Bootcamp can only be installed on the HDD I believe disk1 is the interesting one. Here is the output of sudo gpt -r -vv show disk1:
gpt show: disk1: mediasize=1000204886016; sectorsize=512; blocks=1953525168
gpt show: disk1: Suspicious MBR at sector 0
gpt show: disk1: Pri GPT at sector 1
gpt show: disk1: Sec GPT at sector 1953525167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 1709658208 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1710067848 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1711337384 88
1711337472 242186240 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1953523712 1423
1953525135 32 Sec GPT table
1953525167 1 Sec GPT header
And the output of sudo fdisk /dev/disk1:
Disk: /dev/disk1
geometry: 121601/255/63 [1953525168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 25 127 14 [ 1 - 409639] <Unknown ID>
2: AF 25 127 15 - 1023 254 63 [ 409640 - 1709658208] HFS+
*3: 07 1023 254 63 - 1023 254 63 [1711337472 - 242186240] HPFS/QNX/AUX
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Here is also the list of my disks:
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 119.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 875.3 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 124.0 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS FusionDrive *975.5 GB disk2
Logical Volume on disk0s2, disk1s2
FFA13FBC-2001-40B7-8BBB-BE6EECF8AC11
Unencrypted Fusion Drive
/dev/disk3
#: TYPE NAME SIZE IDENTIFIER
0: GRMCPRXFRER_DE_DVD *3.2 GB disk3
I have gdisk installed and am ready to mess around. Any help would be greatly appreciated!So, when I started my iMac yesterday morning it couldn't boot into OS X anymore either. Several hours of restoring later I am back to square one. I tried installing Windows 7 via Bootcamp again but got the same error message. This time I noticed though that Bootcamp asked me to remove the bootable option from the USB drive with the support drivers in order to install from DVD. Does that ring any bells? I am building another USB drive right now, hoping it would ask me again but this I will decline and try to boot from it.
When you restored, was a Time Machine restore used? TM does not backup Bootcamp and does an erase of the partition. It may also erase the entire disk (including the Fusion drive) if the specific backup of the volume layout of the disks indicates a pre-Bootcamp layout.
My MacBook Pro is a 2009 model and also once had a built-in optical drive. I have no idea why it would work on there but not on the iMac.
You also wrote
When I plug the external DVD drive in, the boot manager recognizes a "Windows" disc and an "EFI Boot" disc. If I select the "Windows" disc I get a black screen with a blinking dash.
The blinking dash indicates that it is working, but does not have the requisite drivers to enable the GPU/Mouse/Keyboard on the media being used.
In the MBP case, did you have two drives installed in the MBP, a Fusion configuration, and then were able to successfully install Bootcamp?
For example on a Mac mini I have a DIY Fusion drive, but the sequence was done differently. Bootcamp was installed using a USB stick+Windows 7 ISO.
1. The two disks are not in a CoreStorage set up initially.
2. The second disk is partitioned (64Gb) and a Bootcamp W7 install completed via USB (this is different HW as compared to IMac, because it has no Optical drive).
3. After the HDD is partitioned, the first partition and the SSD are then used to create a CoreStorage volume.
4. Here is the working version and disk layout. (I plan to erase both disks, put W7 on a partition on the SSD, and make the non-Bootcamp+entire HDD in a CoreStorage volume).
diskutil cs list
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group A8C00490-0E14-401F-AB69-59F37724E8C4
=========================================================
Name: Fusion
Status: Online
Size: 1190201270272 B (1.2 TB)
Free Space: 0 B (0 B)
|
+-< Physical Volume 4772013B-5520-4801-9BE5-BCAEF4AEDAB3
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 255716540416 B (255.7 GB)
|
+-< Physical Volume A679A101-3C78-4A59-B5EE-A4339210CFAD
| ----------------------------------------------------
| Index: 1
| Disk: disk1s2
| Status: Online
| Size: 934484729856 B (934.5 GB)
|
+-> Logical Volume Family 5EF5C7CA-0B9C-4169-82A1-41C84F206672
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: NoConversion
Conversion Direction: -none-
Has Encrypted Extents: No
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume 1512657C-ED13-4B31-82C6-7AECBBCA7F98
Disk: disk2
Status: Online
Size (Total): 1185508581376 B (1.2 TB)
Conversion Progress: -none-
Revertible: No
LV Name: Fusion HD
Volume Name: Fusion HD
Content Hint: Apple_HFS
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *256.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 255.7 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_CoreStorage 934.5 GB disk1s2
3: Apple_Boot Boot OS X 650.0 MB disk1s3
4: Microsoft Basic Data BOOTCAMP 64.9 GB disk1s4
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Fusion HD *1.2 TB disk2 -
"No Bootable Device -- Insert Boot Disk and Press Any Key" ~ Bootcamp Error
We have a Mac Mini with both Mac OSX and Windows 7 installed on the Bootcamp partition. It's all been working fine since we installed them a few weeks ago, and we've been able to use both areas without any problems.
However, we just tried to load the Windows partition and it came up with the error message: "No Bootable Device -- Insert Boot Disk and Press Any Key". Does anybody know why this is happening as it is the first time this message has come up in a few months, and my dad is seriously ****** off right now because he has work to do on the Windows area. :/
Also, someone told me that I had to install Windows again. If this is the case, will all of the files on it be safe? If not, that's not an option.
Thanks for your time,
Tom.We have a Mac Mini with both Mac OSX and Windows 7 installed on the Bootcamp partition. It's all been working fine since we installed them a few weeks ago, and we've been able to use both areas without any problems.
However, we just tried to load the Windows partition and it came up with the error message: "No Bootable Device -- Insert Boot Disk and Press Any Key". Does anybody know why this is happening as it is the first time this message has come up in a few months, and my dad is seriously ****** off right now because he has work to do on the Windows area. :/
Also, someone told me that I had to install Windows again. If this is the case, will all of the files on it be safe? If not, that's not an option.
Thanks for your time,
Tom. -
I swithced it on by clicking on options when I start up and then clicked on Macintosh HD. the other option was a question mark and network drive.
Is there a way to ensure it never happens again, what is the cause for this problem, if I need to uninstall some application, i am happy to do it as long as I know what is causing this conflict.
many thanks!Something is not making sense here.
You claim this is a brand new machine and you have not tried to install Windows or Boot Camp.
Then why would you ever even go into System Preferences > Startup Disk and choose Macintosh HD? It should have automatically booted into Macintosh HD.
You're probably going to have to reinstall Mac OS X. -
No bootable device insert boot disk and press any key... how can this threat be solved?
Hello guyz,
i have tried all the solutions proposed here on this forum to this threat but still havent got any sweetable results. it's even worst than i thought. even when i try to reinstall or delete/repartition, it doesnt work coz there is no partition found. itz completely empty. each time when i get to the disk utility it becomes worthless coz i cannot use it.....i really dont know what to do at this moment.....any ideas?
i still have windows 7 installed on my mac book pro !!! everythiing was working very well until i started getting this 'no boot device found...please insert bla bla bla.......' message when i did turn on my laptop......i am really afraid of loosing my stuffs on the windows system.......
thanks for any help
fruHi Babowa,
thanx for the reply .... backing up is my problem .... how can i backup evverything if i can not bootup to windows nor mac OX? ... i have no access .... or is there a way to do it? then please let me know ... i would be really grateful ...
Once again: i can not access windows 7 or mac OX ... i get stuck at the Utility tools after pressing and holding down the option key ... i can access the different options there but like i said before, there is no partition or operating system to repair or reinstall or even delete....there is nothing at all....seems as if it just disappeared ....
i m short of ideas .... -
After trying to install Windows 7 in my new iMac It will not boot up back to Apple. I have a black screen with the following "No bootable device -- insert boot disk and press any key". My iMac did not come with a boot disk. What can I do?
Try holding down the option/alt key during a restart and see if you can see/select your boot drive there.
-
No bootable device -- insert boot disk and press any key......thats the words always show every time i start may desktop mac
Welcome to Apple Support Communities
Try starting your Mac holding the Option (Alt) key, so you should see all bootable devices on the screen. If you see the OS X volume, select it. After starting, open System Preferences > Startup Disk, and choose the OS X volume.
If you don't see anything, try holding the key after hearing the startup chime. If you still don't see anything, your hard disk could be damaged -
When I turn on my iMac, it shows a black screen and says 'No bootable device - enter boot cd and press any key'.
I'm not sure what to do, I did not recieve a cd with my mac to boot it up (I ordered it online).
Also I can't find my harware serial number (I've tried many times to input what I thought it may be from my receipt). I saw that I need this number to contact apple support, my 90 day complimentary support is still valid so I wish to contact them.
I don't know much about apple products as this is my first apple computer so any information is helpful.Hold down the Alt/Option-key at startup of your iMac to get the Boot Selection screen.
From that choose to boot into OSX.
Once in OSX go to System Preferences then Startup Volume and reset your OSX to be the default.
The new iMacs have OSX 10.7 Lion preinstalled and don't come with any CD/DVD anymore.
Instead OSX Lion includes a new feature called "Lion Recovery".
Have a read here About Lion Recovery
Stefan -
ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error
Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive? -
My Mac book pro immediately displays black screen when I start up and says no bootable device insert boot disk. My question I don't have boot disk nor recovery disk to restore the system. Urgently needs your support and help. Thanks in advance. Michael l. Lluch
Hello
any chance you have try a bootcamp / win install into your Mac ??
if so
try this to boot into mac os
restart your mac , just after start up sound hold on "ALT" key to sart on drive manager
if that work select mac os volume using arrows key and validate by enter
HTH
Pierre
Maybe you are looking for
-
Sqlldr is loading only 1st record from xml document
Hi, I am trying to load XML doc with multiple records using sql*loader. I have registered my XSD perfectly. This is my control file LOAD DATA INFILE * INTO TABLE Orders APPEND XMLType(xmldata) FIELDS( xmldata LOBFILE (CONSTANT FULDTL_2.xml) TERM
-
I can't install itunes. I get an error code 2894 & a message that states the installer has encountered an unexpected error installing this package. Anyone know what I need to do to fix this?
-
Adapter Framework caught exception - 401
Hi, I am trying to use NTLM authentication using Axis adapter in PI 7.1 SP7 but getting 401 error. Axis adapter works for Basic auth. SAP Note 856597 talks about giving PI user security role xi_adapter_soap_message. Haven't found the equivalent
-
Hi !!! i have a problem with the standard transacction VA01. i need to get the data from the structure RV45A to obtain the field MATNR in the userexit FV45K001(CALL FUNCTION 'EXIT_SAPFV45K_001', include program ZXVVAU03), all this in run time. To get
-
Sustainibility covers ethical, environmental, social, and governance values, and Business Process Management of any company has the power to turn it's sustainability strategy into execution. Companies need and want a consistent and integrated busines