How do I rank or rotate a raw and jpg version (combo?)of the same photo with 1 click in Lightroom 4?

Hi, i am new to this forum
I did some searching, but could not find the answer.
I only make stacks of exactly the same photos, but with different formats, mostly 2 jpg versions and a raw. If i change photos further, i unstack that photo, to see the different photos right away.
So, i always want to apply changes to all the photos in a stack, because all basic versions have the same rank, should have the same rotation, and other exif data that i change.
Does anybody know how to always change all photos in a stack in Lightroom?
Thanks!

Hi,
If you shoot RAW+JPEG, there is a spechial option in LR (Preferences>General>Treat JPEG files next to raw files as separted photos) which teats both as one item (unchecked).
All your metadata change is appliled to both, but you do not see the JPEG in LR.
I started with this setting on. But after a while, I recongnized, that I do not want the JPEGs anylonger. Why? Because I did two things:
1. I tried to develop the RAW in a way it looks like the JPEG. Well, O.K. This is only usefull for a very limited number of images (low light, high light) where you have to rescue information from the RAW that is lost in the JPEG. For all other images, it is easier to use the JEPG
2. I developed the RAW in a way that it looks different from the JPEG. I did so, because I want to show this version to others, not the JPEG. Therefore I deleted the JPEG.
There is no way in LR to apply a function / preset to a stack. Only the marked images are affedted. This is the problem with stacks. E.g. you go into a folder with stacks, select all, export all selected and notice, that some images are missing (the ones in the collapsed stack). Every time I got into a folder with stacks and do not want to organize the images, I select "Expand all stacks" from he menu.

Similar Messages

How do I have elements 9 sequence the camera raw and jpg versions of a photo together?

I shoot with a Canon using both camara raw (cr2) and jpg images of the same photo. Elements used to sequence those in organizer so that the cr2 and jpg shots were displayed next to each other, which is very convenient for tagging and editing. Now elements 9 is sequencing an entire day of cr2 followed by the entire day of jpg, which is a giant pain for organizing and editing. Is there some way to sequence them together? i.e. vacation 001.cr2 and vacation 001.jpg next to each other in the organizer.

Hi,
The 700D requires Camera Raw 7.4 or later but that is not compatible with Photoshop Elements 9.
If you don't want to upgrade PSE, you need to use the DNG converter. You have to copy your CR2 files to a folder and then use the DNG converter to convert the files (CR2 to DNG), preferably into a new folder. Then you can import the DNG files into your PSE 9.
The DNG converter is a standalone application and does not integrate into PSE.
Brian

LR 3.3 importing raw and jpg Version of a image...

i tried to import the raw Version and the jpg Version of an Image
Both files have the same name, but different file-extension.
example.orf
example.jpg
LR 3.3 Folders-View shows only the orf version, but the Finder shows both versions at the import location.
During import process the jpg-version is read first, and was visible until orf-version import was complete.
Mac OS X 10.6.5
Olympus E-5 (import via Cardreader)
How i get both Versions visible in LR?

In preferences make sure you select "Treat JPEG files next to
raw files as seperate photos" before you import the files and it will work. See the screen shot.

When I synced my iphone 4s with photos from my Blackberry it creatsd 2 albums with the same photos. with 1677 pictures in each, how do i delete one of them?

It created two libraries "Blackberry" and "Photo Library" and I need to delete one but it will not allow a delete.

This is how Apple handles photos.
They are NOT duplicates.
Just all songs are in your library, and those exact same songs can be accessed from a playlist, all photos synced to your iphone are in Photo Library, you can access those exact same photos (not duplicates) from teh folder/album that you synced.
If you sync 10 albums, you will have one Photo Library where all the pics reside. You can access those same photos via the different albums you synced.

How to delete my email on my iPad and have it automatically delete the same email on my iPhone and iMac?

How to delete an email on an apple device and have that deleted email automatically delete from my iPhone and iMac?

You need an IMAP type email account a opposed to POP 3. Google the two words together to find out more.

How can I transfer files between a PC and a Mac NOT on the same network?

I have an iCloud account, a Time Capsule and a Seagate Free Agent portable hard drive. Which ways can I transfer files (any or all three?) and how? Here's my dilemma: I'm a graphic designer and I work on a PC at my office. At home I use my MacBook Pro...same programs, save files. However, I had trouble earlier saving my new documents onto the Free Agent from my MacBook Pro as the Free Agent was Read Only and original files on it were from the PC. The PC is not on my Time Capsule network and not accessible or even close to my MacBook. I simply want to be able to save the files I updated/changed on my Mac to somewhere that I can access them later from that PC...right now they are saved to my Documents folder. Any help is greatly appreciated. Thanks!

Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.

How to calculate totals based on year (date) and comparing othe columns in the same table please

Hello Good Evening,
Could you please help me here
how to write condition for self table year records, such 2012 name and acctno match with 2013 name and acctno then total, provided below,
create table #tab1 (MasterKey int, AcctNo varchar(12),name varchar(25), SumaofShares numeric, request_dat datetime )
--drop table #tab1
insert into #tab1 values (1000, 100,'Tom', 2500, '10/01/2012')
insert into #tab1 values (1001, 101,'Bat', 1550, '08/11/2012')
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
insert into #tab1 values (1003, 103,'Vat', 1750, '04/15/2012')
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013')
insert into #tab1 values (1011, 105,'Tim',500, '06/18/2013')
insert into #tab1 values (1012, 100,'Tom',800, '08/22/2013')
insert into #tab1 values (1013, 101,'Bat',550, '09/15/2013')
insert into #tab1 values (1014, 100,'Pet',200, '02/21/2013')
insert into #tab1 values (1015, 103,'Vat',150, '03/18/2013')
insert into #tab1 values (1016, 110,'Sun',800, '03/22/2013')
insert into #tab1 values (1017, 111,'Bet',550, '12/15/2013')
insert into #tab1 values (9999, 111,'AAA',110, '12/15/2014')
create table #tab2 (IssueKey int, totalOutstanding numeric, sharedBenefits varchar(1) )
--drop table #tab2
insert into #tab1 values (1000, 500, 'V')
insert into #tab1 values (1001, 150, 'U')
insert into #tab1 values (1002, 100, 'N')
insert into #tab1 values (1003, 170, 'U')
insert into #tab1 values (1010, 100, 'U')
insert into #tab1 values (1011, 200, 'K')
insert into #tab1 values (1012, 340, 'U')
insert into #tab1 values (1013, 560, 'N')
insert into #tab1 values (1014, 280, 'V')
insert into #tab1 values (1015, 150, 'V')
insert into #tab1 values (1016, 840, 'V')
insert into #tab1 values (1017, 530, 'N')
i would like to get 4 columns output
how to get sumofshares (#tab1) and TotalOutStanding(#tab2) summ up with these values please.,
MasterKey (#tab1) and IssueKey (#tab2) are like primary key and foreign key
so the request is
need to calculate, sumofshares (#tab1) and TotalOutStanding(#tab2) as below
1)ShareBenefist = U and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts UN Veriverted'
2)ShareBenefist = V and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts Veriverted'
3)ShareBenefist = N and year( request_dat) in (2012 , 2103) and (Name for 2012 should match with 2013 name and 2012 Acctno should match with 2013 accounno) in (#tab1)
then '2012 and 2013 accts NONVERT'
4)year( request_dat) =2102 and Name and Acctno not match with 2013 account name and acctno (#tab1)
then '2012 last year accounts'
5)year( request_dat) = 2013 and Name and Acctno not match with 2013 account name and acctno (#tab1)
then '2012 This year accounts'
for ex 1) the below accounts in #tab1 has both 2012 and 2013 and acctno same in both years and name is same in both years so it is condired as
insert into #tab1 values (1012, 100,'Tom',800, '08/22/2013')
for ex 2)
insert into #tab1 values (1013, 101,'Bat',550, '09/15/2013')
for ex 4) 2012 records there is not match acctno and name in 2013 recods
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
for ex 5) 2013 records there is no match of name and acct no with 2012 records
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013')
insert into #tab1 values (1014, 100,'Pet',200, '02/21/2013')
insert into #tab1 values (1016, 110,'Sun',800, '03/22/2013')
insert into #tab1 values (1017, 111,'Bet',550, '12/15/2013')
Expected Results (just for format)
AcctTypeDescription, SumofShares, OtotalutStand
'2012 and 2013 accts UN Veriverted',2700,234
'2012 and 2013 accts Veriverted' ,2890,234
'2012 and 2013 accts NONVERT' ,4533,325
'2012 last year accounts' ,2334,567
'2012 This year accounts' ,2222,877
Please
Thank youy in advance
asita

As I understand it, your sample output was only to show the format, and did not pretend to be give the exact result given the sample data. This is pity, because means that I was not able to verify that my query below gives the desired result.
The exact relation between #tab1 and #tab2 is not clear to me. I'm making the assumption that a row in #tab1 may have zero or one row in #tab2, but not many.
My solution has two CTEs. The first simply joins the tables together and extracts the year. In the second CTE, I perform a self-join over the first CTE which I have divided in two by year. This is a full join, since an account may appear for only one of
the year. Note that it is instrumental to extract the year data in inner queries first.
The final query is just an aggregation over the categories.
create table #tab1 (MasterKey int, AcctNo varchar(12),name varchar(25), SumaofShares numeric, request_dat datetime )
--drop table #tab1
insert into #tab1 values (1000, 100,'Tom', 2500, '10/01/2012')
insert into #tab1 values (1001, 101,'Bat', 1550, '08/11/2012')
insert into #tab1 values (1002, 102,'Kit', 1600, '06/12/2012')
insert into #tab1 values (1003, 103,'Vat', 1750, '04/15/2012')
insert into #tab1 values (1010, 104,'Sim',200, '04/21/2013')
insert into #tab1 values (1011, 105,'Tim',500, '06/18/2013')
insert into #tab1 values (1012, 100,'Tom',800, '08/22/2013')
insert into #tab1 values (1013, 101,'Bat',550, '09/15/2013')
insert into #tab1 values (1014, 100,'Pet',200, '02/21/2013')
insert into #tab1 values (1015, 103,'Vat',150, '03/18/2013')
insert into #tab1 values (1016, 110,'Sun',800, '03/22/2013')
insert into #tab1 values (1017, 111,'Bet',550, '12/15/2013')
insert into #tab1 values (9999, 111,'AAA',110, '12/15/2014')
create table #tab2 (IssueKey int, totalOutstanding numeric, sharedBenefits varchar(1) )
--drop table #tab2
insert into #tab2 values (1000, 500, 'V')
insert into #tab2 values (1001, 150, 'U')
insert into #tab2 values (1002, 100, 'N')
insert into #tab2 values (1003, 170, 'U')
insert into #tab2 values (1010, 100, 'U')
insert into #tab2 values (1011, 200, 'K')
insert into #tab2 values (1012, 340, 'U')
insert into #tab2 values (1013, 560, 'N')
insert into #tab2 values (1014, 280, 'V')
insert into #tab2 values (1015, 150, 'V')
insert into #tab2 values (1016, 840, 'V')
insert into #tab2 values (1017, 530, 'N')
go
WITH joined AS (
SELECT a.MasterKey, a.AcctNo, a.name, a.SumaofShares,
   year(a.request_dat) AS year, b.totalOutstanding, b.sharedBenefits
FROM   #tab1 a
LEFT   JOIN #tab2 b ON a.MasterKey = b.IssueKey
), categories (category, sumofshares, totaloutstanding) AS (
   SELECT CASE WHEN A.MasterKey IS NOT NULL AND
B.MasterKey IS NOT NULL
THEN '2012 and 2013 accts ' +
   CASE B.sharedBenefits
WHEN 'U' THEN 'UN Veriverted'
WHEN 'V' THEN 'Veriverted'
WHEN 'N' THEN 'NONVERTED'
ELSE ''
   END
   WHEN A.MasterKey IS NOT NULL THEN '2012 last year accounts'
   WHEN B.MasterKey IS NOT NULL THEN '2013 this year accounts'
END,
coalesce(A.SumaofShares, 0) + coalesce(B.SumaofShares, 0),
coalesce(A.totalOutstanding, 0) + coalesce(B.totalOutstanding, 0)
   FROM   (SELECT * FROM joined WHERE year = 2012) AS A
   FULL   JOIN (SELECT * FROM joined WHERE year = 2013) AS B
   ON A.AcctNo = B.AcctNo
AND A.name   = B.name
SELECT category, SUM(sumofshares) AS sumofshares,
   SUM(totaloutstanding) AS totaloutstanding
FROM   categories
GROUP BY category
go
drop table #tab1, #tab2
Erland Sommarskog, SQL Server MVP, [email protected]

In osx 10.8.2, how do I maintain two Bluetooth devices (mouse and head-set) connected at the same time?

I want to use both a Bluetooth mouse and head-set at the same time, is that possible?

Thank PapaSmurf (?)
My problem was that in Sound settings was not indicated the Head-Set device, although existing, but BoomDevice, that greatly enhances the sound level. So what I had to do was first change from BoomDevice to the Head-Set, and then I changed down to Internal speaker and then again chose BoomDevice. That way, I could turn off the Head-Set without getting the error message, and yet maintain the internal speaker through the BoomDevice.
I had a feeling that I had to do something with the sound settings and your reply made me experiment and succeed! Thanks once again!

How do I save multiple copies of the same photo with different edits

I want to make several photos (each with different crops and enhancements) from one existing photo and also want to keep my original as is for future edits.. Is there a save as feature or a way to copy paste to different albums.

Sha the original to itunes or the Camera Roll. Make the edits you want the share the photo to the Camera Roll or more per able iTunes. The make more edits and share again. To go back to the original photo you can use the Revert to Original function.

How to install & run FF 3.6.3 and 3.0.19 at the same time?

I would like to run simultaneous FF 3.0.19 and the latest version because of extensions that don't work on the new version.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100317 SeaMonkey/2.0.4

Did you do a search on the add-ons page to see if there are replacement extensions with similar features?
You can also look at the portable version: http://portableapps.com/apps/internet/browsers/portable_firefox

How to increment an element in an array and put it back in the same array?

I have an array of values generated by another part of my program. My goal is to count the number of occurences for each integer value in the array and put these values in a new array. This new array will be a histogram of the input array. My approach is to do auto-indexing with a for loop. In the loop I use a "index array" to get the current value of the histogram array and a "replace array subset" to update the array element with "current+1". The problem is that when I wire the output of the "replace array subset" VI back to its input, I get a wire error. I guess I cannot wire it like that, but what should I do? Is there a completely different approach to do this that
is more elegant?
Thanks for your help!
Benoit

Hi Benoit,
I believe the thing that's missing is a shift register.
Right-click on the edge of your "For loop" and select add shift register.
Wire an initialized array to the shift register left terminal before entering the "for loop". Wire from this same terminal (inside the loop) as the source of the info used in your "index array" and replace array. The results of these two operations (just the way you are doing it now) gets wired to the "right terminal" of the shift register (inside the loop).
What ever you stuff into the right terminal, gets returned via the left terminal on the next iteration of the loop. When the loop is done, your final array of counts can be accessed by wiring from the "right terminal" (outside the loop).
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Images as RAW and jpgs - how to separate?

I shoot both RAW and jpg, that way I have the RAW for detailed editing, and the jpg for quick edits to post on web, as required, or to send a quick copy to friends. I will probably stop this (shooting both) when I get used to editing RAW, but that is part of my evolution and growth in developing my skills in my digital darkroom.
When I first started with LR, I was using the Beta 2 version and simply imported my PS Elements 8 Catalog and that worked okay, because both versions of the image were imported so that I could see both of them and then pick the image I wanted for further editing. I have now upgraded to the new, full version of LR3 and have just downloaded my first set of images from a weekend of shooting - went looking for bluebirds and only found one nesting box with an active pair in it. I will go back for more in a day or so - more images that is. It is strange how the population of nesting bluebirds in my part of the Western Prairies has declined significantly in the past five years, but that is a whole, different story, Anyway to proceed...I downloaded the images from this afternoon's shoot and found that the RAW image (Canon - CR2) and the jpeg show as one image with a title that says IMG_xxxxx.CR2+jpg. I would like to be able to break the two different images out, or at least get at each one separately for editing purposes. For the life of me, I cannot figure this one out. I am still waiting for Kelby's LR3 book that I pre-ordered...maybe this week. Not sure if that will tell me how to do this, assuming I can. If I can't do this, then I will have to import into Elements 8 and then re-import that file into LR3 - a process I would rather not have to do.
Any insight that anyone can provide on how to do this (I assume it can be done) will be greatly appreciated. Maybe it is something as simple as a "switch" on an import preset, or setting up a "custom" import preset (if there is such a thing). Thanks in advance.
Regards,
WesternGuy

Susan, thanks for the insight. I think I will follow your lead and delete the images from my catalog and re-import them. Hopefully I can find the options that you have noted. It would be nice, though, if there was a way to break them apart after loading, but at least I don't have too many to redo.
Regards,
WesternGuy

How can u have lock rotation off and mute feature off at the same time

How can u have lock rotation off and mute feature off at the same time

Maybe this will help. The link at the bottom is the same one that was posted above.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop?

Seriously, how hard would it be to give Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop (i.e., Fibonacci, Triangle, Diagonal, etc.)? This disparity in features is inexcusable and embarrassing. Surely the teams communicate?

I don't have CC nor LR. Just be sure you are comparing apples to apples
That is a nice statement for a Windows guy…
I never use crop in ACR because I like this feature more in PS itself. Also the inability to save crop presets in ACR makes it very limited. The ACR engine for PS and LR are the same, the body differs.
Thanks to hard yelling people we now have about the same crop tool in PS as in LR. Although I still don't like it in PS, after having used it years and years I now have to move the image instead of the crop.
Sadly the ability to rotate crop and having adjust it automatically to the borders is a very nice option. If it wasn't for this I would stay with the old classic mode.
But the OP is right, many features in different Adobe Products have somewhat the same result but sometimes very different approaches, options and tools.
Until the Adobe HQ is going to settle in Utopia we might be better off trying to learn living with it

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by

I just purchased the new Canon SX60 camera. Despite downloading and installing the latest version of Adobe DNG converter, I receive an error message saying that Photoshop CS4 can't open up/convert raw files (.CR2). This is the same file format as used by the SX50, with which I never had any problem. Does anyone have a suggestion on how to fix this problem? Thanks.

Camera Raw plug-in | Supported cameras I do not see that SX60 as supported. Just how new is the SX60 when was it announces. Its support is not even listed in ACR 8.7 RC

How do I rank or rotate a raw and jpg version (combo?)of the same photo with 1 click in Lightroom 4?

Similar Messages

Maybe you are looking for