How do I re-arrange and delete icons?

I can't figure this out. Please help me!

Touch an application icon and hold it for about 3 seconds. It should make X's appear in the corner of every app icon and you can now drag them. To get out of this, hit the button at the bottom of the Touch

Similar Messages

How do I see, organise and delete unsorted bookmarks? I am using Firefox 3.6.6 on a Mac with OS X 10.5.8

How do I see, sort and delete unsorted bookmarks in Firefox 3.6.6? Using Mac OS X 10.5.8. All bookmarks not in folders already seem to be in a lump called unsorted bookmarks in the Library but I can't open this to see them. I have deleted some from the bookmarks menu via the blue star it does not work with sites without an icon. pls help

I have this same problem. I want the ability to remove links from the unsorted bookmarks or the entire category altogether.
If there is no resolution, I could delete all Firefox files after saving my important bookmarks to Safari then come back and reload Firefox.
Why Mozilla does not take this concern whole heartily I do not know.
I have seen complaint about this dating back over two years.

A phantom folder with the name of a folder that held photos has appeared in my finders places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/

Fitbit does not sync with healthvault no matter how many times I add and delete it

My healthvault never shows any information synced from fitbit.com, I have the scales and a tracker and no matter how many times I add and delete it through the fitbit share healthvault page but it never ever syncs over night. I have left is weeks and
still nothing in HV.
I am starting to wonder if HV supports fitbit? Any help would really be appreciated, this is driving me insane.
Do I need to create a new account? is my account just broken?

Hi,
I have spoken with FitBit about this issue and they provided the following:
Since you have already linked and unlinked your account and still having issues please contact Fitbit Support (http://help.fitbit.com/?cu=1)
for further assistance."
Addititionally when you contact FitBit can you please let them know that you have already contacted HealthVault.
Thanks
Tomas
MS HealthVault Support

HT201210 How do I remove itune and charger icon from my iphone screen and allow access

How can I remove itune and charger icon from my iphone 4s screen and allow access. While downloading the lastest version of iune my iphone was being charged. The phone do not allow access anymore.

Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
Miss Bspace wrote:
How can I remove itune and charger icon from my iphone 4s screen and allow access.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then see Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

How to reset All users and delete their table?

Hi,
i want to know How to reset All users and delete their tables with username- system and password-manager.
thanks

Hi
Here delete means truncate or drop?????
If drop use the following statement to generate the script:
select 'drop table ' || Owner || '.' || Table_Name || ';' from Dba_tables
where owner in (<All_the_users_you_want_to_reset>);
But before firing the above statement extract the DDL's to create all the users and put it in a file and just run that file to re-create the users.
if its truncate then:
select 'truncate table ' || Owner || '.' || Table_Name || ';' from Dba_tables
where owner in (<All_the_users_you_want_to_reset>);
Hope this Helps
Regards

Hi when i click on mozilla firefox it keeps coming up saying restore session why is this every time i go on firefox how can i stop this and delete it all together

hi when i click on mozilla firefox it keeps coming up saying restore session why is this every time i go on firefox how can i stop this and delete it all together

When you quit firefox with tabs and windows open it "remembers". When you start Firefox it tries to restore the tabs and windows you had open.
You may also want to check the preferences for Firefox:

How do i reinstall ios5 and delete ios6

Hi how do i reinstall ios5 and delete ios6, i have had nothing but trouble since the ios6 update.
i have to re-enter my wifi password everytime i my phone goes on standby, and the maps are pants..

Wow, I love it when people tell you how "millions of people aren't having problems" or "let's troubleshoot" ... good thing you folks don't work for Apple customer support. Okay, here's the deal:
Ipad2 updated to ios6. Sound cuts out after a few seconds. in "Music" app, there is no slider for volume ... in task bar at bottom (far left), there is no slider for volume. When you use the rocker for volume on the side, up pops the symbol for "sound effects" (not the volume indicator graphic). Switch the button to or from "lock rotation" and that does nothing. In alarm clock, sounds work fine ... on random occasions the unlock slider has a click, then all sounds disappear.
I reinstalled and reverted to default settings ... nothing changes. Reset the thing a few hundred times ... nothing. When I resinstalled, I installed no apps at first ... nothing.
I have tried every suggestion that people have put up here and none of them work. I have never had an update that even approaches how bad this one has been (I have nine Macs, 3 iPads, and 3 Ipod touches .... never have I seen such a ****** update).

Using Insert and Delete icons in table control wizard.

Can anyone tell me how to perform a new row insertion or deletion in a table created using the table control wizard.
I see there is a form fcode_insert_row and fcode_delete_row, but dont know how to call them and what parameters to pass and all.
Since iam new to SAP-ABAP, some code samples will be a great help.
Thanks to all in advance.

Hi Lavanya ,
You have to add the icons personally in the table control.. . Put fcode for addition button as INSE and delete as DELE ..coding will be already thr in the wizard no need to anything just add icons in the table control by selecting from f4 help on icons option of screen.
Thanks,
Vishnu .

How to assign file extension and custom icon to executable?

Hi all,
I was reading an old thread about this issue:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=116925
I need to try to do this. My application uses a custom file extension (i.e. .abc). Upon installation I would like to:
1. Assign My App and custom icon to the file class (extension .abc).
This could be done by manipluting the registry (http://msdn.microsoft.com/en-us/library/bb776856(VS.85).aspx)? This could be a problem with Vista s unless registry operations occur during installation any changes are placed in a VirtualStore, correct?
2. Enable the double-clicking of .abc file type to pass the data in the file to my VI (exe).
According to the File Handling Guidelines of Jean-Pierre Drolet (http://www.openg.org/tiki/tiki-index.php?page=File+Handling+Guidelines) the best way to do this may be using LabVIEW as an ActiveX server.
I know that when I build an executable (or installer?) there is the option to enable LabVIEW to act as an ActiveX server. This much I know I need to do.
I thought I would open this discussion again as others may be interested and there doesn't appear to be a completely clear solution available. Please do contribute where you can.
Cheers,
Battler.

battler. wrote:
My application consists of Event Structure.
How to register for ommand line event so that when a user double-clicks on a .abc file I can handle the opening of it?
This needs to work (the files need to open) not only when the application is closed but also when it's already open.
Anyone have ideas?
The solution to that is to implement a DDE server in your application (and add DDE entries to the registry on installation). There are still DDE functions in LabVIEW vi.lib\Platform\dde.llb but they are considered depreciated and have been removed from the palette, also because Microsoft is trying to tell everyone that DDE is depreciated and sort of unsupported too. But it is still the mechanisme to pass actions from the shell to running applications.
I hesitate to send you over to lavag.org where there have been some discussions about this years ago. If you go there you would do good to employ a friendly attitude. That board is run all by enthusiasts and idealists and they are all great folks but react not very friendly to people with an attitude.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How can I insert, modify and delete entries on my table control?

Hi,
I already have build a table control. Now I want to make manipulations on it. Therefore I have created 3 buttons, insert, modify and delete. But how can I get actions on table control.
This is my code for the internal table:
BEGIN OF its OCCURS 0,
mark TYPE C VALUE ' ',
artikel_nr TYPE ZARTIKEL-ARTIKEL_NR,
artikel_typ TYPE ZARTIKEL-TYPE,
bezeichnung TYPE ZARTIKEL-BEZEICHNUNG,
preis TYPE ZARTIKEL-PREIS,
mwst TYPE ZARTIKEL-MWST,
END OF its.
and this is the code which i wanted to delete a row in my table control:
WHEN 'DELETE'.
LOOP AT its WHERE mark EQ 'X'.
DELETE its WHERE mark = 'X'.
MOVE its TO ZARTIKEL.
ENDLOOP.
ENDCASE.
ENDMODULE:
and my PBO and PAI:
PROCESS BEFORE OUTPUT.
LOOP AT its INTO ZARTIKEL WITH CONTROL ARTIKEL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE EXIT.
LOOP AT its.
MODULE V1.
ENDLOOP.
MODULE user_command_1060.
But if I now open my table control and mark the line that I wanted to delete, nothing happens, not on my internal table and the data even not deleted on my table ZARTIKEL. Have you an idea what I did wrong??

Hi,
In the attributes of table control take the SELCOL as wa_zekpo-flag
And in the internal table and work area add a field as flag(1) TYPE c
Refer:
At screen logic:-
PROCESS BEFORE OUTPUT.
MODULE status_8002.
LOOP WITH CONTROL po_tab.
    MODULE pass_data.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002.
LOOP WITH CONTROL po_tab.
    MODULE modify_data.
ENDLOOP.
MODULE function.
In PBO,
MODULE status_8002 OUTPUT.
SET PF-STATUS 'ZTG_SELTB'.
DATA : line_count TYPE i.
DESCRIBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 5.
ENDMODULE.                 " STATUS_8002 OUTPUT
*&      Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE.                 " PASS_DATA OUTPUT
In PAI,
*&      Module USER_COMMAND_8002 INPUT
MODULE USER_COMMAND_8002 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 8001.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_8002 INPUT
*&      Module MODIFY_DATA INPUT
MODULE DISPLAY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
ENDMODULE.                 " MODIFY_DATA INPUT
*&      Module FUNCTION INPUT
MODULE FUNCTION INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'SELECT'. "<--select all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = 'X'.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DESEL'. "<--deselect all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = ' '.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DELETE'.
      DELETE FROM it_ekpo WHERE flag = 'X'.
ENDCASE.
ENDMODULE.                 " FUNCTION INPUT
Regards,
Tarun

How to stop "Add Row" and "Delete" from committing.

Hello, I am new to Application Express, and maybe someone can help me make this save like an Oracle Form.
If you hit the "Add Row" button, enter data, then hit the "Add Row" button again, it commits the first row. If you check a value and hit the "Delete" button, it commits the delete. I would like the insertions and deletes to be handled like an update, that is with an explicit commit by hitting the "Apply Changes" button.
Can I control this in Application Express, and how?
Thank you,

Kevin,
1. instead of having a form on a table, you would create a form on a collection,
2. collection is also a table but it is only of a temporary nature - it is valid with the corresponding session. Once the session is closed, you can't access the collection.
3. to see how to create a collection and a tabular form use this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:176
4. add row and delete will add / delete a copy of your table data. You can then create a process to save the data in your target table only if the button apply changes is clicked.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

Hello everyone,
This is Karie Garnier in British Columbia, Canada.
I'm new to FCPX.
I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
How can I select this invisible audio clip and delete it?

I think you could be right, that it's an old render file that's got stuck.
By the time I finished this movie my 500 GB hard drive was 99.9% full and
FCP started acting wierd, so I suspect you are right.
I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
glitch remains.
Can you please tell me:
a) How can I fix the old render file so that it is no longer stuck? ... and
b) How do I take a screen shot of the timeline?

How do you uninstall mail and delete associated files?

I just find the mail application annoying and I never use it. I'd like to clear out any application I dont use to free up space on my hard disk ... How do I do this?

The mail app only takes up a very tiny amount of space - 60.4mb for the application itself. I don't think it is worth deleting and I would advise against it. But if you insist..
I haven't tried this myself, but this is what I found while searching:
Drag Mail.app to the trash and delete it.
use AppZapper which will find everything related to Mail.app and delete it too.
got to Home > Library > Preferences and delete the file "com.apple.mail.plist".
Then go to Home > Library and delete the folder called "Mail". That should get rid of the last traces.

How to perform insert, update and delete in a table component

hi all,
i am using a table component in my page. I want to retreive data from multiple tables as well as perform insertion, updation and deletion operation.The changes should be affected in the corresponding tables. can anyone provide a solution for my problem.
Thanks in advance
regards,
prasant

There is a great tutorial for insert, update and delete records in a table.
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/inserts_updates_deletes.html
Hope it helps.
Thanks,
Moumita

How do I re-arrange and delete icons?

Similar Messages

Maybe you are looking for