How do I re-import a clip with new in/out points?

I have an imported clip, already in the timeline, that needs to have more footage before and after what I have already imported. (There IS more raw footage available.) Isn't there a way to drop the clip onto the Log and Transfer that allows you to change/extend the ins and outs, and re-import?
When I drop the clip onto the Log and Transfer window, the re-import prompt doesn't give me the option of adjusting the in/out points. Thanks in advance for your response!

Isn't there a way to drop the clip onto the Log and Transfer that allows you to change/extend the ins and outs, and re-import?
Nope. You have to import the clip a second time, and then use the new import.
Shane

Similar Messages

How to do I import my bookmarks with 7.01?

I just loaded Ubuntu 11.10 I'm trying to import my book marks to Firefox but do not see the import bookmarks in the bookmark library. How to do I import my bookmarks with 7.01?

Ubuntu 11.xx displays window menus in the control bar at the top of the screen with the switch to the Unity window manager.
* http://en.wikipedia.org/wiki/Ubuntu_Unity
Click on Bookmarks/Show All Bookmarks then move your mouse to the left upper corner toward Firefox Web Browser.
You'll get pop up menu (Organize, Views and Import and Backup).

How can I smooth a clip with part cut out?

How can I smooth a clip with part cut out? Someone walked in front of the camera when I was shooting; I removed the frames with the person in them, but this left a slight visual hiccup. What's the best way to smooth this out in APE12?

If you do not have a "cut-away," as Steve mentions, then with those problem Frames removed, I would add a Cross-Dissolve between the two Clips (two Clips, after you have cut out the offending footage), BUT, one thing to consider with any Dissolve Transition, is Handles. You need enough to allow for the Transition - so you might need to Trim the first Clip a few Frames more, and the following Clip, a few Frames less. For a bit more on Handles, see this article: http://forums.adobe.com/message/3727485#3727485
Good luck, and hope that helps.
Hunt

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

HT1311 How can I get updates for apps with new Apple ID

How can I get updates for apps with new Apple ID. I have apps that I got for free, and some that I have purchased. I had to create a new Apple ID because I don't have a credit card now.

Apps will always be tied to the ID in which they were purchased or downloaded under. You can not change this unless you buy or download the free app using the new ID.

How to Control Barcode style in SAP with New Procedure

Dear Friend,
I am format my data to print out as bar codes that use in New Bar Code Printing!
But the Bar Code only include series of lines of varying thickness and/or distance from one another , without information which stand for character .
How to do that display Bar Code include lines and information which stand for character ?
How to Control Barcode style in SAP with New Procedure ?
Thanks a lot !

the barcode is print the type of barcode . check below barcodes
KUNAUNR
KUNAUPS
AUFNR
these barcodes print like this
testbarcode

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

Final Cut Imports my clips with the wrong item properties

Ok, I have a really weired issue. I have a bunch of HDV footage that was captured. The source footage is HDV 1080p24, 1440 x 1080. Quick time reads it just fine, and so does Final Cut Pro on several machines, except the machine i need to edit the stuff on.
It is really weired. When I import it in to final cut and put it in the time line it turn says it needs to be rendered. And my sequence setting are set correctly. Because it works on other machines. So i go to check my Item properties and Final cut is interpreting the footage as 1920 x 1080 with Square pixel aspec ratio. When the frame size should be 1440 x 1080 and the pixel aspect should be HD (1440x1080). I am using Final Cut version 5.1.2, and I cant for the life of me figure out what the problem is. Can anyone please help.

I am going to try to capture HD1050p.60 video into my Final Cut Studio Pro Tomorrow morning. I have five tapes with an hour of video on each of them. I want to maintain my high resolution HD quality. This is the first time I have attempted to do this. I understand that I use the easy capture. I have read a lot of the posts I understand there may be a problem if the camera man did not leave gaps between the takes in that 4 seconds of the video is cut off. I asked him to shut down the camera between takes to save film but most of the takes were 10 minutes or more -- does that mean that I will lose the first 4 seconds of the video when I transfer? I also understand that I must import sound and video seperately. How will I ever be able to match up the sound with the video if they do not import together? The Camera that was used was a Sony HDVDVCAM 3ccd30fpm HDV1080i1DV. Can you please give me some advise as to how to do the import without losing the quality of my video. Also, do I need to set up the final cut pro for 16/9 frame width which is what my video is. Right now I have my studio pro on a 720 which is what the demo learning video was. I would appreciate any help you can give me. I have purchased a 250Gig Lacie to transfer my video to since I understand that if I put all of the video into Studio Pro it will be too massive to work with.
Sue Black

How to replace the existing selection screen with new selection screen

Hi,
I have first selection screen with parametre as a table name, then I have created dynamic selection screen as 2nd selection screen with different fields of that table as select options. This is done using genaration of dynamic report. Now If I click on button on this 2nd selction screen , then I want to replace this 2nd dynamic selection screen , with the other selection screen fields.
Can anybody guide me, How to do replace one slection screen with different selection screen.
and one imp thing is this selction screen is populating with dynamic fields on it.
Regards,
Mrunal

As I can understand you want to make some of the screen field to disable or visible on screen depending upon the interaction of user with screen 1.
You may use this example code in PBO of screen 2.
LOOP AT SCREEN.
    " action has been taken to modify the area office screen as per the option chosen at screen 99.
    CASE ACTION.
        " if the user has taken up the option of UPLOAD
      WHEN 'UP'.     " screen processing while we upload the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'DN'.      " screen processing while we upload the approved plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'AO_UP' OR SCREEN-NAME = 'AO_VE'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
      WHEN 'VW'.      " screen processing while we view the plan
        " during upload we will make dates as output fields only
        IF SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_TO' OR SCREEN-NAME = 'ZSDTPLANVRSIO-DAT_FRM'.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
        " also make 2 buttons disabled
        IF SCREEN-NAME = 'RLGRAP-FILENAME' OR SCREEN-NAME = 'FNAME'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
        " and hide the file input field
        IF SCREEN-NAME = 'AO_DO' OR SCREEN-NAME = 'AO_UP'.
          SCREEN-ACTIVE = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDCASE.
ENDLOOP.

How to open a URL that begins with news://

Hi, everyone!
It seems a silly question, but how to open it?
URL is here: news://news.gmane.org:119/gmane.editors.lyx.general

That's a URL for a usenet group. Those aren't used very much anymore (except by some true diehards), and it's likely your ISP doesn't even provide the service directly, though there are ways to access them via the web. In your case, click here.
If you wanted to configure your browser to handle them, well, it would help to know what browser you're using. For Firefox, you could try the instructions here, but I'd guess it wasn't worth it, unless you had to deal with such links often.
Last edited by frabjous (2010-11-10 21:40:46)

How to change SelectionColor in TLFTextFielfd created with new TLFTextField(); syntax?

How to change SelectionColor in TLFTextFielfd created with var txtTest:TLFTextFielfd = new TLFTextFielfd(); syntax ?

You have posted in the AS1/2 forum. If you are using a TLFTextField, it can only be used with AS3. You might need to repost in the AS3 forum if you truly intend to use the TLFTextField. As far as I can see there is no SelectionColor (or selectionColor) property for the TLFTextField.
Also, in every instance of the word you have mis-spelled it...
"TLFTextFielfd" should be "TLFTextField"

How do I download iLife for free with new macbook???

I just purchased a 13" Macbook Pro on Friday and am trying to figure out how to download iPhoto and iMovie on it. For some reason there is a cost for each program in the app store. I submitted an up-to-date request for Pages, Number, and Keynote which should be ok, and I have downloaded garageband for free in the app store. This is my very first mac so I was hoping someone can help with this. The link attached is on the apple site saying that the six programs are supposed to be free with new purchases.
http://www.apple.com/creativity-apps/mac/
Thanks!

Log into the APP store using the Apple ID that you used to set up the computer and go to purchases - you may have to accept the programs and then download and install them
LN

Does iTunes update songs I imported from CD with new remixed versions?

About 10 years ago I imported many CDs into iTunes. One of those albums, released in 2002, was recently remixed by the artist and released as a separate album from the original, both still available separately, even with new cover art. Before I bought the new version I started to listen to the old one, to refresh my brain. But it was definitely playing the new remixed version. The cover art didn't change and the song files in the music folder say the songs were last modified April 30, 2003. I haven't bought the new release at all yet, so I can't think of any other way this happened. Oh, I don't subscribe to Match.

The article is to download music from your CDs to the iTunes library.
roaminggnome is right, you can only copy the music from your iPod to the computer if they're purchased form iTunes.
You may use a third-party software like senuti, ipodrip, etc.

How can I recognize my Iphone 5 with new itunes software? Its not syncing even with different apple devices?

I need help syncing my iphone 5 with new Itunes software. It wont recognize my phone under the files tab and selecting devices they are greyed out as if it doesnt recognize the device

this worked for me.
PLUG your iPhone to PC and go here on your PC...Control Panel\Hardware and Sound\Devices and Printers. under unspecified you will see apple iPhone......right click on it and remove device. unplug your iPhone and replug it to your pc and iTunes should open and will see your phone.

How to retrieve a clip's in and out point?

I have cut a clip appart and now I need to know at which frame of the clip the new clip fragment starts.
Can someone please enlighten me on where to find this piece of information?

Strange, if I do this at my machine, nothing happens...
What action would this shortcut perform?
I have created another, small, (hypothetical) case here:
As you can see I have added the same video clip to the timeline twice:
So in the sequence both start at frame 00:00:00:00.
I trimmed both clips in the sequence. (BTW: What would the correct terminology for clips being added to the sequence be? Clips themselves can only reside in the Project window. Sequences may only contain links to those clips... So, just to be able to distinguish both, I'll call these links in a sequence 'clip links' here.) ...Thus, what I actually did was to trim both clip links in the sequence.
As you can see from the thumbnails in the image, I trimmed each of the clip links at different clip positions.
Although both clip links are of same length, I trimmed the clip link in track Video 1 to start at 00:00:00:00 while the clip link in track Video 2 has been trimmed to start at 00:00:15:07.
Correspondingly, the clip link in track Video 1 ends at clip frame 00:00:03:05 while the clip link in track Video 2 ends at clip frame 00:00:18:13.
These are the values I want to retrieve. After trimming I need to know exactly what is the first frame of a clip link that's being displayed.
So I need to acquire the 00:00:00:00 - 00:00:03:05 for that clip link in track Video 1 and the 00:00:15:07 - 00:00:18:13 for the clip link in track Video 2.

How do I re-import a clip with new in/out points?

Similar Messages

Maybe you are looking for