How do I re-install maverick without Apple ID

IMAC 2009 model
Maverick OSX
Hi Guys
i'm having a nightmare trying to re-install OS X Maverick on a Imac i just purchased from a previous owner. the Imac has been wiped clean but when arriving at OS X Utilities I go through the procedure of clicking on > Re-install OS X > Continue > "Terms & Conditions" Agree > Macintosh HD > Install then to arrive at the apple ID section. I type in my credentials and receive the following message "This item is temporarily unavailable. Please try again later".
When going to the desk utility i have no option for partitioning the drive?
I do not have another mac to download anything on and i only have my laptop to post this on.
I do have the original disks, but there is no option to reinstall using the disks.
Can someone please give me some professional guidance as i am struggling big time
Cheers

You cannot get Mavericks using your Apple ID unless you already did so for another computer. If not, then either you install Lion, Mountain Lion, or Yosemite. You must do this:
Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Similar Messages

  • How do I re-install Mavericks without Apple ID

    My MacBook Air has recently been running very slow so I decided to foolishly Warsaw the OS. I have tried to restore the system using internet recovery however it does not recognise my Apple ID which is needed to re-install mavericks.
    If it help I had to go into an apple store for them to install mavericks for me about two months ago.

    See if your model falls in one of these categories: Computers that can be upgraded to use OS X Internet Recovery. If it does you may require a firmware upgrade first.
    However, if your model originally came with Snow Leopard, then you will first need to reinstall that version of Snow Leopard after erasing the drive.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Install Mavericks without associating my Apple ID with a credit card

    Hello,
    I am changing to a new laptop and as part of that action I am thinking to up from OS X 10.6 to 10.9. I have an Apple developer account since long time, also a working Apple ID. However I have never used the App Store (and frankly don't intend to do it).
    So I opened the App Store for the first time. I have to sign in to download Mavericks. If I use my existing Apple ID, it says that the account needs to be associated with App Store, and then proceeds to query my credit card information.
    I have no intention to transmit my credit card information to the Apple / the App Store. I have read various conflicting posts on the net saying that there is a way to specify "None" as a payment type (others claim that this option doesn't exist or require that I create a new account).
    On my screen I can only choose between VISA, MasterCard, American Express, ClickAndBuy, and Maestro.
    How can I, as of 19 Feb 2014, download and install OS X 10.9 without providing credit card information to Apple?
    Thank you,
    h.h.

    itemState wrote:
    So there is no way to install Mavericks without creating a credit card based account with Apple?
    What happens if I retrieve the installer from a colleague that already runs OS X 10.9? Is the download specifically associated with his identity?
    Yes, and it is a violation of the license terms as well.

  • Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb again?

    Creating a Mavericks USB boot drive after the horse has bolted.  Can I create a bootable USB drive from my iMac after installing Mavericks without saving the Install OS X Mavericks.app file?  Do I need to re- download the whole 5.29 Gb from the App Store again?  My problem is my 4Gb/month allowance on a 12 month contract.  I cannot purchase a data block from my ISP and although my speed is theoretically slowed to 64k after reaching my 4Gb, it actually ceases to download in reality.

    HI tasclix, it depends what you mean by an OS X boot drive.
    If you want a recovery disk from which you can reinstall (by re-downloading) or recover from a time machine backup, then nbar is correct.
    If, however, you want to boot and run the OS X installer from the USB drive (so that you don't need to download again), then you will need a copy of "Install OS X  Mavericks.app"; see this article:
    http://support.apple.com/kb/HT5856
    Before downloading again, search your system to see if the installer is still there - it's usually in the /Applications folder unless it has been deleted, but check your whole system for it anyway, you never know, you might still have it somewhere.
    Message was edited by: SilverSkyRat

  • How to find my lost ipad without apple id in short time ?

    how to find my lost ipad without apple id ? i wanted to report but i got no serial number of it. i tried to find by using 'find my iphone 'app but it cant show me the place of my ipad ,i think the person has signed out my id. i have got some important info and photos in it . how to find the location of it in short time ?? thanks !

    This is what you can do:
    Reporting a lost or stolen Apple product
    If the thief was able to turn off Find My iPhone, then your password must have been easily guessable (or the thief knows you) and you will not be able to find your iPhone.  Otherwise, click the "Find My iPhone Overview" from the above article for more information.

  • I have purchased a second hand iphone 5s but it was not activate now when am going to activating my iphone ,its ask me to log in by registered apple id, tell me how i can activate my iphone  without apple id?

    i have purchased a second hand iphone 5s but it was not activate now when am going to activating my iphone ,its ask me to log in by registered apple id, tell me how i can activate my iphone  without apple id?

    rajajaved wrote:
    i have purchased a second hand iphone 5s ..
    The Apple ID and Password that was Originally used to Activate the iDevice is required.
    If you cannot get this information from the seller
    Removing a device from a previous owner’s account
    You need to return the Device for a refund, as you will not be able to re-activate it.

  • How can I re-install firefox without losing my data. It is Infested with ADS BY bame.

    Firefox is infested with "Ads by name".
    How can I get rid of it or how can I
    Re-Install firefox without losing any data?

    Couple other suggestions:
    Open the Windows '''Control Panel''', Add/Remove Programs. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help surface innocent sounding bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
    Also, could you check whether Firefox has a non-standard '''connection setting'''? You can do that here:
    "3-bar" menu button (or Tools menu) > Options > Advanced > Network mini-tab > "Settings" button
    The default "Use system proxy settings" should piggyback on your Windows/IE "LAN" settings. But you can try "No proxy" to see whether that makes any difference.
    Finally, our support article [[Troubleshoot Firefox issues caused by malware]] lists '''cleaning tools''' other Firefox users have found useful. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
    Success?

  • How do I install Mavericks without invoking the OSX Server Plugin?

    How do I perfrom a clean install of Mavericks from the Recovery Partition without it automatically installing, and then invoking or executing the OSX Server Plugin that ultimately results in rendering open directory operable as well as the server.  I have ignored this continously, but the other day I went into the terminal and typed ARP -s that lists the shortname for the host of my MacBook Pro and it gave a totally different name than what I had given it in the wi-fi network interface under the WINS tab. More importantly, I do not want to install open directory nor the osx server plugin as it opens up more complexity than I want to deal with.  Any suggestions is greatly appreciated.  BTW, below are the steps I performed for installing Mavericks.
    1. Powered on the MacBook Pro and then hit the Option key.
    2. This took me into the Recovery Partition, whereby I went into the Disk Util and erased or formatted the hard-drive.
    3. I then clicked out of the Disk Utility and went into the Recovery Mode by clicking on reinstall the current OS.
    4. I went through all the prompts and the system downloaded a current version of Mavericks.
    5. After completion, I turned on my Macbook Pro and went through the prompts to install Mavericks.
    6. This is all I did, and I didn't download the OSX plugin nor invoke it in the new version of the Operating System. 
    I just assumed that it was a standalone version until I found the server for osx running with open directory invoked, the server invoked, along
    with other components relative to a new standalone version.
    Again, my question is simple: How can I reinstall Mavericks without it downloading and automatically
    iinvoking the components as described above? 

    Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that  Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.

  • How to restart Adobe programs after installing Maverick on Apple ?

    I just installed Maverick on my Apple Computers and now I cannot start the Adobe programs.
    What can I do ?  Thanks in advance,  Jos FRANCOIS

    Hi GautamBahl,
    If I had known this I would not have activated Maverick.
    I am not a professional user of the Adobe Programs ; I bought the collection in 2009 when I retired and enjoy to discover new things with it..
    Please advice me what to do.
    Thanks

  • Installing Yosemite without Apple Id

    I'm selling my iMac, and want to reinstall Yosemite, but it prompts me to input an apple id to do so. If I proceed, will this link my apple Id to the computer again? I don't want to go through the hassle of selling a computer with no OS, and explaining to them how to install it with their own ID. So is there a way to install yosemite without and ID/will using my ID bind it to the computer?

    You definitely don't want to enter your Apple ID. This would give a purchaser access to your account.
    Please see this Apple Help note:
    What to do before selling or giving away your Mac - Apple Support
    which says, among other things:
    'After you reformat your hard drive and reinstall OS X, the computer restarts to a Welcome screen and asks you to choose a country or region. If you want to leave the Mac in an out-of-box state, don't continue with the setup of your system. Instead, press Command-Q to shut down the Mac. When the new owner turns on the Mac, the Setup Assistant will guide them through the setup process.'
    It also links to a page telling you how to erase and install Yosemite (though you appear to have done this):
    OS X Mavericks: Erase and reinstall OS X

  • How to download OS X Mavericks without error message

    I have tried to download the latest OS X, Mavericks, and every time I get the message "This copy of the Install OS X Mavericks application can't be verified. It may have been corrupted or tampered with during downloading."
    I have read other comments about verifying disk, repairing permissions, not deleting the old copy and nothing works.
    I am now on my 12th try and still the same.
    Does anyone have any way around this at all? Apple??????????

    For others who are still having this problem, please read my reply on another thread; I'm interested to hear if this works. Short version: try creating another admin-level account on your Mac, and then try installing Mavericks from that account:
    https://discussions.apple.com/message/23520189#23520189

  • How to completely clean install Mavericks?

    Title sums it up...I want to do a completely clean install of Mavericks, making it as if I just bought the laptop with Mavericks installed. I do not currently have access to a big enough USB so if there is a way to do this without one that would be preferable.

    Mr. Gagné wrote:
    I am still running Mountain Lion. So, I need to install Mavericks, then do a standard hard drive wipe/OS re-install?
    If you're on Mountain Lion and you want to do a clean install, the Recovery Partition is available for you to boot into and run the OS X installer. There is no need to install Mavericks if all you want to do is clean install.

  • How do I re-install CS5 without old full version?

    How do I re-install CS5 with out the old full version.  I had to re-install my operating system.

    If you don't have your DVDs/ old downloads, then that is your only chance:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    Mylenium

  • How can I deploy my AAMEE without Apple Remote Desktop?

    Hi everyone,
    I created a build for Adobe CS6 Production Premium for Mac with the serial number embedded, along with the current updates. All is well with that; however, this is the issue that I am having:
    I have tried to test the build on a local machine (the computer I created the build on) and was able to install the package with no issues; however, when I try to deploy build onto a networked machine, it doesn't work.
    I have read through the AAMEE Reference Guide and have read (if I am not mistaken) that for CS6, you can only deploy an AAMEE build through Apple Remote Desktop onto multiple machines. I have also read that you would need Apple Remote Desktop on all of the machines you want the build to deploy on.
    If that is case, if I have read the guide correctly, what is the point of deploying the build through a network if you have to still install ARD onto all the machines you want the software one? How can you get around this to be able to deploy your AAMEE successfully onto a network on machines?
    When I tried it last night on one network Mac with ARD, I received the error message for "Validating packages...". I'm not sure what that means because the build works perfectly on local machine.
    Any ideas would help as far as deploying the build on a network without using ARD, or really, just a simpler alternative that works?
    PLEASE HELP.
    Thanks.

    Hi,
    You can deploy package using any of these tools - ARD, SSH, Casper suite, Absolute manage, Land desk..and may be more but we have only tried these.
    We have mentioned ARD as an example, but other standard tools can be very well used for deploying package. and there is no need to have ARD installed on all machines where you want to deploy the package, but only on admin machine.
    can you please let me know - which client OS are you trying to deploy the package and whether the client machine is logged or logged in? please forward install.log if you are facing the error.
    thanks,
    Rahul | [email protected]

  • How can I re-install FF without any imports from other browsers?

    I initially installed FireFox because supposedly it allows me to run Sky Go which sadly Chrome no longer does. When I did so, I thought it would be wise to allow it to import my bookmarks etc. However, since I was not able to run Sky Go, they suggested that I unistall FireFox and reinstall it without any imports, this I have now tried twice without success to do; hence this question. All help gratefully received and greatly appreciated.

    Good afternoon Fred,
    Thank you for your prompt reply.
    I had to re-think the sequence of events yesterday following very helpful support from the Sky Go team.
    Sky Go had originally been installed on my laptop because I used it with Chrome.
    Sadly and somewhat unexpectedly, (like overnight) last week, Sky Go no longer worked with Chrome. My first on-line Chat with Sky revealed that this was due to an upgrade by Chrome and it should soon be once again available; however, after a week, when it had not been resolved I contacted them again. I should say that in the meantime, Sky Go continues to work very well with Internet Explorer.
    Yesterday I downloaded and installed FireFox with the option ticked to import bookmarks etc. when Sky Go was still loaded on the laptop. However, upon the advice of the Sky go Adviser, I did uninstall both Sky Go and Firefox, and reinstalled the FireFox and the FireFox version of Sky Go and when this did not work, repeated the attempt. Again the adviser was incredibly patient and helpful. He put this down to the original installation of FireFox during which I exercised the import bookmarks etc. option; hence my question. Is there any way I can reinstall Firefox now without it remembering that I originally chose to include the import option?
    In the meantime, I continue to use IE for Sky Go but think I would really like to use FireFox instead.
    I hope that this information will help you to help me Fred, and thank you for your kind attention and assistance.
    Yours sincerely,
    Sharon Pendorf

Maybe you are looking for