How do i re install windows 7 on a new hard drive on a hp mini 110

just fitted a new hard drive in my hp mini 110 can any body tell me how to reinstall windows 7 back on the hard drive i have the bios password so i can change the boot up pref new to this side off computers learning a lot thanks andy

Hi
Please find the link given below might help you check Component replacement procedures 53.
Manual
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

How to install Windows 7 on new hard drive?

I have changed the old hard drive (500 gb) with a new hard dirve (1 Tera), and now I have two problems: -
1. How do I install Windows 7 on new hard drive?
2. My laptop was pre-installed Windows 7 Pro, but all the DVD kit (Application & Drives Recivery Disc + Operating System Revocer), which was provided (by Lenovo) for the laptop is in the Windows 8 Pro. So how do I install Windows 7 Pro, in my laptop while all DVD kits are in Windows 8 Pro?
by the way this is my laptop spec (for reference) ; -
* Note *
I plan to install Windows 7 Pro in my new hard drive using another Windows 7 DVD (Not DVD provided by Lenovo), but how do I get all the Leveno program which found within the 'Application & Drives Recivery' disc (such as ; - Lenovo System Health and Diagnostics, Lenovo Power Control,Lenovo's Fingerprint Reader) to install in that hard drive? (as I tell you before, all the DVD kit is in or only for Windows 8 Pro)
I hope somebody will help me answer my question,
Thank You
Solved!
Go to Solution.

I got the solution;
Answer to question 1 ; using a backup & recovery software to clone my current OS, then transfer to my new hard drive.
Answer to question 2 ; download all the Drivers and software ( all the application that located on the DVD kit that I have) on Lenovo Official Website.
or other solution, send it to a computer service shop and let the experts ( the workers) install it for me ( the most simple and safe way).

Can't instal Windows 7 to new hard drive

Hello everyone,
I was looking for solution for a while, but cant find it, so I really hope you'll help me here !
First of all, I 've been using my pc until I received the S.M.A.R.T. warning about possible hard drive failure soon, and one morning PC didnt start - one of the hard drives was dead (in my hp model there are two hard drives). After finding out which one was it ( I tried taking one hard drive out, leaving the other and vice versa) I bought a new 500 GB hard drive. Aparently the damaged hard drive was the one with operating system, because of startup message which told me that operating system not found. Nothing fancy, just instal windows like I always did, or so I thought ..
Got my USB flash drive with Windows 7 64 bit, plug it in, the usual windows instal guide loads up. I choose my language , keyboard input etc . At the point where I have to choose "where do I want to instal my windows" I see two hard drives: 1) disk 0 Partition 1 (my old original 232 GB stock drive) and 2) disk 1 Partition 1 (new recently purchased 500GB drive).
So ofcourse, since I replaced old hard drive with the new one I just bought, put it in the same slot, naturaly I chose my location for windows - new hard disk 1 Partition 1. When I highlighted it, a yellow mark apeared at the botom which said "Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's BIOS menu".
Ok, so I tried to continue anyway, I pressed next and windows began to instal, took about 10 - 15 mins. Everythings normal until first restart part before completing instalation. PC restarted and .. Windows instalation setup started once more from the begining. So I thought , ok I ll try to instal to the old hard drive disk 0 Partition 1 ( this time there was no yellow warning mark). So instalation began again , restarted , and ... Once more instalation setup starting from begining !
I am really lost here, I tried replacing hard drives places whith each other, or leaving just one of them, every time windows starts instaling from begining ! Allthough, everytime there are less and less disk space, which means it actualy is instaling.
So any thoughts where to start ?
I would be so greatful for your help,
And see ya

Hi @Seniunas ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
It is my understand that one of your two hard drives failed. You have replaced the failed drive and are having a difficulty installing Windows 7 from a USB stick.
I have some questions.
What is your exact model of n DV9700 notebook?
How Do I Find My Model Number or Product Number?
Is this a retail version of Windows 7?
Were your drives setup in a RAID configuration or just two individual drives, one being the boot drive with Windows.
You could try this, I am not sure if it will work.
Remove the 232 GB drive completely from your system.
Boot to your Windows 7, USB stick and let Windows format the drive before it installing Windows.
If this completes successfully, make sure the boot order is set to boot to that drive and test it.
If you are then able to boot into windows, shut down the notebook and reinstall the secondary drive.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Installing Windows 8 on New Hard Drive

I am not very computer literate so please bear with me.
The hard drive went bad in m Hp Pavilion 15 Notebook PC last week. I ordered a new hard drive from H P and installed t this morning. I found a video online and the installation was quick and simple...a piece of cake!
However, I am now having major difficulties with the intallation of my operating system. I purchased Windows 8.1 and when I put in the CD it tries to install, I think, but then I get a message that says "Selected boot image did not authenticate. Press <Enter> to Continue. " I have tried this numerous times and I always get the same thing...and pressing enter does nothing.
I learned on some of the forums that there is something I may do in bios to change how it boot ups. However, I cannot get into the bios to make the changes that they say I need to make.
Please help me!

Hi,
Try the following.
Shutdown the notebook.
Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Bios Menu ( f10 ).
Under the System Configuration tab, expand the Boot Options Menu.
You need to set Secure Boot to Disabled and Legacy Devices to Enabled.
When done, press f10 and select to save the changes.
You may then have to enter a 4 digit pin displayed on the screen to confirm the setting changes - enter the code and hit enter.
Insert the Windows 8 installation disc and Shutdown the notebook.
Tap away at the esc key as soon as you press the power button to enter the Start-up Menu and then select the Boot Options Menu ( f9 ).
Use the arrow keys to highlight the CDROM (uefi) option and hit enter - if prompted to 'Press any key to continue....' - do so.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Re-installing windows 7 on new hard drive

Hi
The hard drive failed on my hp pavilion p6-2180ea, 4 months out of warranty. I've replaced the hard drive myself but my pc never came with a windows 7 installation disc, I have the product key on a label on the machine, can download or aquire the disc from HP, or will i have to buy a new copy from a shop?
mixxy

Hi:
If you want to make your own plain W7 installation DVD or USB flash drive, download the applicable version of W7 from the link below that is on the product key on the bottom of your notebook and use the product key to activate the installation (of course that assumes the key is still completely legible).
Link to the W7 ISO downloads is below. The SP1 Media Refresh files are the latest ones.
http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
Then use this tool to make the ISO file bootable onto a DVD or 4 GB USB flash drive.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
Then download and install the drivers and software you need from the PC's support and driver page.
Or you can order a set of recovery disks from HP.

How to install and reconfigure a new hard drive?

How to install and reconfigure a new hard drive?
I installed a new hard drive from best buy for my "vintage" MacBook laptop. When I turned on the laptop and the flashing folder appeared, I need help?
I looked online for some clues. I put in the software disk I received when I bought the disk but I cannot select a destination volume to install the software. I tired to partition the drive within disk utility but there was an input/output error. Should I just plug in my external hard drive and hope everything reboots like magic ?
Thank you for any help you can give

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Any ideas on how I install Lion on a new hard drive

Any ideas on how I might install Lion on a new hard drive when I purchased the OS online from Apple prior to my hard drive failing? I don't have a disk.

when you install your new drive, what happens? it should boot into internet recovery and you setup from there.
does it not do that?
here is an article about how to force internet recover http://www.cultofmac.com/106669/force-lion-to-start-internet-recovery-on-your-20 11-or-later-mac-os-x-tips/
here is apple literature about the recovery partition (if you had a hard drive) http://www.apple.com/osx/recovery/
here is a do it yourself downloader that makes a usb stick the recovery disk. If you have data on the usb drive I would back it up, as this will erase everything else on the thumb drive. http://support.apple.com/kb/DL1433

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? Thanks

I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me..

Problem installing windows on a secondary hard drive

Hi,
Here's my issue (sorry for my english, I'm french):
-I have a macbook pro 15" with OSx Mavericks.
-I have a SDD harddrive PLUS a 500GO HDD connected to the optical slot.
I want to install windows on my secondary hard drive.
What I have done so far:
-I've cloned my older windows partition.
-I've created a bootcamp partition on my secondary HDD.
-I've restaured my clone to the new bootcamp partition on that secondary HDD.
Up to that point, everything seemed alright.
BUT when I try to boot on the windows partition, I get this message:
no bootable device insert boot disk and press any key
As if my MBP couldn't boot on a secondary hard drive.
I've looked for answers on this forum but didn"t find anything.
thanks,
m

The only difference between your setup and mine is that I have the SSD in the optical slot and the windows image is on my HD. I boot from the optical slot though, as all my regular Mac stuff is on the SSD. All I can think to do is use Bootcamp to delete the partition and try again. It sure seems like it should work.

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

My conputer crashed and I want to install cs4 onto a new hard drive, how can i do this the registration won't let me?

What does "the registration won't let me" mean? If the serial number is rejected, contact support by web chat. for anything else you need to provide proper technical information and actually explain your issue.
Mylenium

How to install Mac OSX on New Hard Drive (No Disk)

I have a new Hard Drive that I just received and I'm looking to install it on my Early 2009 17 inch Macbook Pro. The problem is I dont have the original disk that came with my macbook. I do have a 2TB external HD so is there anyway I can back up Maverick on there and install it on the new Hard Drive without having the original Disk?

If your machine is running Mavericks with the old drive, just connect the new one in an external enclosure. Boot to the Recovery partition by holding the Command and R keys at startup. Run Disk Utility to prep the new drive, exit Disk Utility and install Mavericks.
You could also do the external enclosure and use Carbon Copy Cloner to copy your existing drive to the new one.
http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1395317179&sr=8-3&keywords=2.5+enclosure

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

I purchased creative cloud when I purchased my laptop, I've since had to put in a new hard drive. How do I reinstall the programs on my new hard drive?

Creative Cloud Help / Sign out, Sign in | Creative Cloud desktop app
http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
Creative Cloud Help / Install, update, or uninstall apps
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Installing Creative Cloud Apps
http://tv.adobe.com/watch/cs6-creative-cloud-feature-tour-for-video/installing-desktop-app s-from-creative-cloud/

How do I get the os on a new hard drive?

optical drive doesn't work, hard drive crashed. how do I get the os on a new hard drive?

You can connect an external optical drive.
You can use another Mac with a good optical drive together with a Firewire cable if both computers have Firewire ports.
You can have someone clone the installer DVD to an 8 GB USB flash drive.
You can take it to an Apple retailer and see if they will install for you.

How to transfer time machine back up to new hard drive

How to transfer time machine back up to new hard drive?

You may like to take a look at this thread... https://discussions.apple.com/thread/4207670?start=0&tstart=0

Installing Mavericks on a new hard drive...

Hi
My hard drive crashed, and I bought a new one today. They told me at best buy I need to download mavericks drivers onto a usb or something. I'm not really sure what they meant so I thought I would ask here. Where do I go to put Mavericks onto a usb to install it on a new hard drive?
Thanks

1. If it shipped with 10.7 or newer, you'll need to go through that OS by following the instructions above, and then install Mavericks in the normal way. If it shipped with 10.6.8 or earlier, reload that OS from DVD and then upgrade to Mavericks.
2. The computer's firmware contains instructions for connecting to the Internet.
(100250)

How do i re install windows 7 on a new hard drive on a hp mini 110

Similar Messages

Maybe you are looking for