How do I re-set the playback speed of an iPod_2?

I listen to audiobooks and recently the playback speed has gotten much much faster.  My sister told me how she fixes the problem on an older iPod, but this one does not have the same settings.
I've looked at all the settings and cannot find the way to do this.  And my Apple support has run out.
Has anyone else had and solved this problem?

Sharon, I think everyone has come across this issue at one time or another. It's really a simple matter to fix. Simply tap once on the screen so that you can see the "scrub bar" that allows you to navigate to different spots in your audiobook. Just below the right-hand side of that scrub bar you should see a little box that probably says 2X right now. Tap it until you get it to say 1X and you should be good to go.

Similar Messages

  • How can I slow down the playback speed of selected parts of a captivate video?

    Hi everybody,
    I'm pretty new to Captivate and although it offers some great tools, there is something that I just can't get to work:
    I'm creating a video tutorial about how to use a website i'm working with so I've tried using "Automatic" ("Demo" mode chosen) recording option which is recommended for this type of video. However, the video recorded has a different playback speed than the amount of time I recorded. This means that some of the slides have a quicker playback speed than the way I recorded, thereby not leaving enough time to show the given feature.
    The recording mode with the most "true" playback was "Full motion". However, I would still like to be able to slow down selected parts of the video, but can only find guides on how to slow down the entire presentation.
    Can you please advise me on how to slow down only selected parts of the project? If this is not possible in Captivate, please advise me on which video editing software (where you can slow down the playback speed on selected parts of the video) is compatible with Captivate 5?
    Thanks!

    Thank you. Andrew Kramer's Video Copilot video, which I somehow managed to miss, was very helpful.
    I had a 79 second clip which I precomposed and enabled time remapping. But I have 12 places where I need to slow down the layer. After a while, I was runing out of room to add more keyframes using the method promoted in many videos and instruction sites (grab the last two keyframes, including the end frame, and drag).
    In reality, you can add keyframes wherever you like and you can adjust them however works best within the existing timeline without messing with the duration, etc.
    Much appreciated.
    Paul

  • My video clip plays too slowly. How do I set the playback speed?

    I am just learning how to use Premier Pro. When I import the video clip and put it into the sequence section, the clip plays extremely slowly - more like still photography.
    What am I doing or not doing to cause this?

    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    Also, For CS5 and later, the easy way to insure that your video and your project match
    See 2nd post for picture of NEW ITEM process http://forums.adobe.com/message/3776153
    -and a FAQ on sequence setting http://forums.adobe.com/message/3804341
    >just learning
    The tutorial list in message #3 http://forums.adobe.com/message/2276578 may help

  • How do I set the Shutter Speed in Manual Mode on my EOS 70D

    I recently was forced to upgrade to a Canon 70D after my 50D died from a fall.  I am not happy with the ease of setting the Shutter speed while in Manual mode.  The only way I can currently set the shutter speed while in Manual mode, is to go to the info screen and set the shutter speed with the touch screen.  The manual states that I should be able to set the Shutter speed with the Main Dial, behind the shutter release. ( which is how it was on the 50D).  I can control the Aperture with the quick control dial.  The Function Lock button is off.
    I am sure this is do to some setting I have wrong, that is not allowing me to fix this issue, but I cant figure out what it could be after hours on the net and in the manual.  I would greatly appreciate it if someone could help me with this issue.
    Thanks
    Gene

    Another possible solution is to use a battery grip on your 70D and see if the dial on the grip will change the shutter speed.
    There are some discussions about this problem on some earlier models Canon DSLR. Check it out.
    http://www.dpreview.com/forums/thread/2638326

  • Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word.

    Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word. Sample Editor playback sounds like Alvin on a meth binge. Spoken phrase is generated from Textspeech. Textspeech can export files as WAV files or MP3 files. Perhaps a clue?:   When exported Textspeech WAV file is dragged and dropped into track in arrange area of new project, it exhibits same supersonic speed. When Textspeech file is exported as MP3 file and dragged and dropped in arrange area track, it plays at correct speed.

    Thanks Erik,
    If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
    As an aside....
    I recall how all the 'naysayers' prior to LPX (and in some cases, since...)  were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now?

  • What happened to the playback speed change option in iTunes U??

    I just updated to the latest iOS and installed other updates. That change removed the playback speed change option for both my iPad and my iPhone in the iTunes U app. It is still available in e podcast player. What happened to this option in iTunes U and will it be restored? Listening to some lecturers at normal delivery speed is agonizing.  Any insights on is?

    This appears to be a regression with the new version of itunes U
    Updated: Nov 14, 2013
    Version: 1.4
    So to get it to work:
    you need to have a video with more than 1 option (such as 1 with subtitles)
    Afterwards, the speed you set when the button is working is remembered so when you change to videos where the button doesn't work, it will keep the speed you had.
    We're testing Apple's software for them!

  • User control of the playback speed of an eLearning

    Is there any way for the user to adjust the speed of an eLearning? T...he question has to do with accessibility requirements. If a user needs to slow down or up the playback speed similar to how you may adapt volume - can that be done in a Captivate project? Thanking you in advance!

    Thanks! I totally agree.
    We already use interactive objects to allow users to move forward at their own pace. Yet this was a specific request and I could not find anything supporting it in Captivate. Therefore I wanted to double-check with the community.

  • How can I re-set the App Store so the Updates will again appear under the Updates tab?

    Hi,
    I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
    How can I re-set the App Store so the Updates will again appear under the Updates tab?
    Many Thanks,
    David

    Wanna know this too

  • I've had a hard drive crash and put in a new one.  However iTunes has or list all of them from my old drive.  How do we re-set the directory

    I've had a hard drive crash and put in a new one.  However iTunes has or list all of them from my old drive.  How do we re-set the directory?

    You can re-download the software from Download CS5.5 products
    Install and enter your serial number when prompted.
    Find your serial number quickly

  • I inadvertently pressed CTRL+ another key (possibly V or B or N) and the text size of my bookmarked page was significantly reduced in size. I can't read it. How do I re-set the text size?

    I mistakenly pressed CTRL + another key (possibly V or B or N or whatever), when I was reading my e-mail. The text size shrank to a size that is useless to me, but I cannot seem to get the text size re-set to normal. Indeed all of the formatting on the page has been reduced (symbols, instructions, frames etc). Existing Firefox and returning to the bookmarked page makes no difference. How do I re-set the system?

    Hi,
    Please try '''Ctrl''' + '''0''' (zero). Alternatively '''View''' ('''Alt''' + '''V''') > '''Zoom''' > '''Reset'''.
    [https://support.mozilla.org/en-US/kb/how-do-i-use-zoom?redirectlocale=en-US&redirectslug=Page+Zoom Page Zoom]
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]

  • 11gR2 OLAP - How to define or set the  size of the OLAP PAGE?

    Hi,all!
    Could you help me? How to define or set the size of the OLAP PAGE in 11gR2?
    Edited by: [email protected] on 25.01.2010 8:36
    Edited by: [email protected] on 25.01.2010 8:36

    Hi there,
    The size of an OLAP AW page is automatically derived from the block size of the tablespace in which it is stored (which in turn is typically derived from the db_block_size initialisation parameter)
    Do you have a particular concern about this setting?
    Thanks,
    Stuart Bunby
    OLAP Blog: http://oracleOLAP.blogspot.com
    OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
    OLAP on OTN: http://www.oracle.com/technology/products/bi/olap/index.html
    DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

  • How do I permanently set the zoom level? I am sick of hacing to "ctrl +" on every page!!

    How do I permanently set the zoom level? I am sick of hacing to "ctrl +" on every page!! It is a HUGE waste of time. If I can't do it, then no more FF.

    The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • TS3694 I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.

    How do I turn off I pod touch?   The restore screen is stuck

    Thanks for the assistance.  I was able to restore my I pod after letting the battery run down.  I then synced the I pod to my new computer.  Most of the songs moved from the cloud to the actual I pod drive.  But, many of them did not.  I tried downloading them from the cloud on my I pod, but this didn’t work.  Will I be able to restore the missing songs?  Thanks, Cleveland.
    Sent from Windows Mail
    From: Apple Support Communities Updates
    Sent: Sunday, November 9, 2014 4:52 PM
    To: shircleve
    You received a reply
    lllaass has replied to your question. You can view the full discussion in Apple Support Communities.
    I am trying to restore my ipod and it stopped moving before the restoration was completed. How do I re-set the ipod. I can't turn it off.
    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Correct Answer  Helpful Answer 
    Use the buttons above to tell lllaass and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to lllaass, go to the discussion in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • So how do you set the burn speed?

    I'm having problems with home movies burned to good quality media (TDK -R). They appear to degrade and become unplayable within months. The discs are stored correctly and not misused or dirty - this is happening to numerous discs being used on numerous players (inc. the iMac they were originally burned on).
    Having read through previous discussions, I'm trying to ensure I burn at the slowest speed possible to see if that helps, however I can't find anyway to specify a burn speed in iDVD. Preferences are set to "best quality".
    Thanks if you can help (I have looked through these forums and "Help" before posting
    iMac G4 800 17 / 768 MB SD RAM   Mac OS X (10.3.9)  

    Unless you are using a different burner that what came with your 17" iMac G4, I am not sure you need to worry about burn speed. It is already a slower burner. That said, you could create a disc image from with iDVD and then use the disk utility to burn the image to a DVD. Doing this will give you a dialog box allowing you to select a burn speed if a variable burn speed is supported.
    I suspect the discs themselves. First, I hope you haven't attached a paper sticky label to these? That would be the sure fire problem. Next, it could be a bad batch or maybe your burner just doesn't like TDK? It happens. Verbatims are usually very Mac friendly.
    Mike

  • How do you to set an limit speed on your router port

    Hi, I got a WRT300N and there 4 port. I like to know if we can set an limit speed on 1 of these 4 port? Example, my port 2 is using for download and I like to limit the speed like 50k/sec. If yes, please could you guide me how do I make the settings? Thank you

    NO, there is no such settings on your Router, which will control your computer speed, Router will distribute the same speed on all the computers. May be you can search for some software we does that.

Maybe you are looking for