How do I record an audio source outside of Logic while in Logic?

Hi everyone, I have a question I would like to address to the forum.
How do I record an audio source outside of Logic while in Logic? For example, I would like to record the audio off a youtube video or dvd to be then used in Logic. I am using a Dididesign M-Box Mini for both my audio input and audio output i.e. all sound is coming in and out of the M-Box. I hope this is an easy question to answer (I am a new Mac user). Thanks in advance.
Mac Pro Mac OS X (10.4.9)

Use the 3.5mm audio out jack on the back of your computer. Connect it to your audio interface, and record like normal. You need an adapter cable. ( 3.5mm stereo to two 1/4 inch mono) see link.
http://www.musiciansfriend.com/product/Live-Wire-3.5M-TRSDual-14-Y-Cable?sku=330 481&src=3WBZ4DS

Similar Messages

How can I record an audio sound and convert it to a ringtone?

How can I record an audio sound and convert it to a ringtone?

Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
In iTunes the recorded voice is listed under Music as some_numbers.m4a.
Right click on the item and choose Create AAC version.
Drag the converted voice onto the desktop.
Delete the voice copy in iTunes. (important step)
On desktop, rename the some_number.m4a to something_more_intelligent.m4r
Drag it back to iTunes and you will find it under Tones.
Now select it (for sync) and connect your iPhone, do a sync.
If everything works out, it will be in Settings > Sounds > Ringtone.
Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
Hope this helps.

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

How can I record the audio for a radio station I'm streaming LIVE?

How can I record the audio for a radio station I'm streaming LIVE?
I don't want to record the sound in my room, but only on the sound I'm streaming

Grane Duke wrote:
To reduce or make the room noise as low as possible (to get the best audio recording), I recommended the OP to try to record the radio live streaming audio in a silent room. Does it makes any sense to you....??
No. Preferably one records using direct input.
Your comment It doen’t matter whether he/she is recording the audio from the macbook or any external speakers because if the room is noisy than obviously the ambient room noise will be recorded. is pretty silly really. Think about what you just wrote.
And you do have a bad habbit in your posts of over using ???????? & !!!!!!!!!!!!!
One is enough.
Cheers
Pete

How do I record internal audio to garageband for ipad2? I want to record from a drum machine app to garageband.

How do I record internal audio to garageband for ipad2? I want to record from a drum machine app to garageband.

I dont believe you can do that directly. You would need to record the audio separately and then import

How can I record an audio file directly from a digital recording device directly to the iMac?

How can I record audio directly to my iMac from a digital recoding device?

What digital recording device?

How do I record an audio and send to a friend?

Hi,
I'm sure there is a much better forum on which to place this question, but is there a way I can record an audio on my iMac without a corded microphone and send it via email to someone or use it another way?
A side note to that would be what might be an inexpensive corded mic to get?
Thanks much,
Lee
P.S. I just began using Skype and will be wanting to purcahse a headset/mic
to make calls: if anyone knows what might work good with a Mac that would
be neat. Lots of questions. Total non-tech person here! Or... where would
I post a question like this "PS" here on a support forum?

Use GarageBand. I have made some sound files on just the internal mic of the MacBook Pro and the iMac has a similar one.
Make a new project using the voice selection (delete the extra track -- it starts with male and female) and, once you get close to the mic input (test this to see how near you want to be), press the red record button.
When you have finished, use the Share menu and send the file to disk. Once there you can attach the file to email easily. When exporting, select the mp3 format as that is universal.
As to a microphone, if you use one that goes into the mic port, you will probably need an amplifier. A USB mic is going to be more expensive, but of good quality. It depends what you are going to need it for.

How can I record streaming audio???

HP HDX 18T laptop
Windows 7
NCH Wavepad sound editor
Hi, I desperately need help with this issue:
Is there anyway I can turn "OFF" the speakers so sound does not come from them, but STILL have audio levels active internally so I record streaming audio with my NCH software Wavepad program?
I've been trying everything .. in the Control Panel setup, I am trying to "capture" streaming audio with my Wavepad program, but I can only attenuate the "mic" levels that the actual laptop picks up .. for example, if there's background noise in the room, it picks that up - I DON'T WANT THAT! - I only want the streaming audio from a recording - not the background sounds in the room.
Folks at NCH Software keep telling me to check with laptop of Windows advice.
Wavepad used to do this easily and cleanly before (well, on other computers and other Windows versions)
If I go into Windows Mixer, and turn down Speakers, it also forces to turn down System Sounds - I do not want system sounds down; only speakers.
Summary:
I want to record streaming audio into my audio capture software.
I want to independantly cancel laptop speaker output, while maintaining audio levels for streaming capture.
I DO NOT want extraneous sounds in the room's background picked up by the laptop's mic, which then interferes with the recording.
(or is there a Windows program that will do this for me? I spent $$$ on the deluxe Wavepad software ,, but it's not doing what it used to do)
Any help, or advice will be GREEEEEEatly appreciated!!!
Thanks, Michael

Fixed (I think ....?)
Turns out there's no "Stereo Mix" option in my Control Panel sound boxes .. apparantly no one else has it either in Windows 7??? depending on sound card ...
Well, a work-around is to connect a male mini-plug "Y" into [one of] the laptop's headphone outs; then run a mini-plug cord (male-to-male) from it to the laptop mic "in" ... that leaves one unused female mini-plug on the "Y" .. which you can then run your headphones (or speakers ) off of.
Found that solution online .. got the parts; it works now.
Still baffled why there's no "Stereo Mix" in Windows 7 ....?

How do i record system audio

Hello all.
Just trying to find out how to record audio from the iMac 27 inch (Lion). If you know, does the same procedure also apply to a Macbook?

Try Applications > Utilities > Audio MIDI Setup.
I'm afraid I can't simulate your issue as I have no iRig Pro, so I would just look around in there and make sure there aren't any issues.
If that doesn't work, try making a new project in GarageBand, click Empty Project, and then the Microphone. Underneath the microphone you just clicked will be input, output, reset setting, etc. You may be able to resolve your problem by playing around with these.
I'm sorry I couldn't be of any more help.

How Do I record Screen + Audio

I record my screen and when I play back my video no sound plays. How can I make sound come from quicktime? I just want to record some gameplay and theres no sound when I play it back.

Hello,
Thanks for using Apple Support Communities.
You will need to select an audio input before starting a screen recording in Quicktime Player in order for any audio to be recorded. To see which options are available to you, please follow the directions in the article below.
QuickTime Player 10.x: Record your computer’s screen
Take care,
Alex H.

Question: How do I record CD audio directly into SBCS4 off the soundcard?

I.e., without connecting audio out from a speaker to mic input on the desktop? Thanks in advance.
Scott

Use the 3.5mm audio out jack on the back of your computer. Connect it to your audio interface, and record like normal. You need an adapter cable. ( 3.5mm stereo to two 1/4 inch mono) see link.
http://www.musiciansfriend.com/product/Live-Wire-3.5M-TRSDual-14-Y-Cable?sku=330 481&src=3WBZ4DS

In GarageBand how can I record a mono source into both stereo channels?

I am working on a project that has only 1 track (Casio keyboard plugged into my Mac's audio input). This obviously, results in a mono recording using the left channel only. Is there any way to copy that track into the right channel, so at least the recording sounds balanced? Right now it is very heavy on the left, with a little sound leakage into the right channel. Adjusting the pan position of the track doesn't seem to help. Anyone have any ideas?

If it is an head phone output it should be a sterio output.
(You can verity it with headphone)
But your guit. jack is a mono cable. ( 1/4" unbalance I think)
You would need and 1/4 balanced cable and be sure that your 1/8 adapter is
sterio. (they usually are, but checking alwas good)
Your could get an 1/4 sterio to 1/8 sterio adapter plug into your keyboard output
ane have an 1/8 cable from that to your mac.
Or anything else it is basicly a cable thing you have to work out.

How to view record from java source table

hi,
i had created a table as
CREATE JAVA SOURCE NAMED "Hello" AS
public class Hello {
public static String hello() {
return "Hello World"; } };
also it compiled but i dont've idea to view the record from it
can u help me

Please check the following script --
create or replace and resolve java source named "Hello"
as
import java.io.*;
import java.sql.*;
import java.math.*;
import oracle.sql.*;
import oracle.jdbc.driver.*;
public class Hello extends Object
    public static String Display()
    throws IOException
        return "Hello World";
create or replace procedure Hello(v_str out varchar2)
is
   language java
   name 'Hello.Display(java.lang.String) return String';
create or replace procedure HDisplay
is
x varchar2(400);
begin
Hello(x);
dbms_output.put_line('String is: '||x);
end;And, from sql prompt --
exec HDisplay;N.B.: Not Tested...
Regards.
Satyaki De.
Message was edited by:
Satyaki_De

How do you record voice audio?

Hi, I have been unable to record any voice audio at all. I have tried several types of microphones, and went directly into garage band, but no audio has been recording at all. The speaker part of the audio is working just fine.
I am wondering if perhaps garage band is not set up properly, or if there is a problem with the sound card or driver? However, since the audio out is working fine, it seems that there may be some other issue somewhere.
Any help or suggestions would be much appreciated!

Hi-
I was wondering if it was a driver or a sound card issue?
It is neither.
Unless you have a special microphone with a built-in preamp (self powered), like DaddyPaycheck said, standard microphones run at line level, and won't work with out a preamp.
http://support.apple.com/kb/HT2839
Alternatively, check out the iMic:
http://www.griffintechnology.com/products/imic

How can I record an audio stream to my iPad mini?

How capture streaming audio to mini

You'll need an external audio capture device hooked up to your iPad.
This article lists a bunch:
http://music.tutsplus.com/articles/top-30-devices-and-interfaces-for-ipad-audio- -audio-16640

How do I record an audio source outside of Logic while in Logic?

Similar Messages

Maybe you are looking for