How do I record audio of two people in remote locations?

I work remote and the subject matter expert is in another state. What is the best way for us to record a demo where you can here both of our voices? I will have the software open on my computer and will be sharing my screen so she can see it. I will be asking her questions then she will answer so I need to capture both voices. I do audio all the time but usually just me and my headset mic. Any help/suggestions would be most welcome.

Hi there
Are you working with a PC or a Mac?
If it's a PC, you might consider using the "Stereo Mix" option to blend the mic and speakers. Then direct Captivate to record the system audio.
Cheers... Rick

Similar Messages

How would I record audio from iphone into computer?

i was wondering if anybody could help me.
i want to hook up my ipod to my computer and record the audio from the iphone
how would i go about doing that?

The OP would like to "record audio from the iPhone", not copy audio files across.
Once we find out which audio (existing files or live through the mic) we'll be able to offer suggestions.
For exisatinf audio, the first choice is obviously iTunes and sync, but I suspect it's the latter, in which case I'd recommend the free app: Megaphone Free.
It directs the sound picked up by the microphone to the headphone socket, so you can then just record the Line-in signal on the Mac.

How can I record Audio while listening to another Audio Track?

I wanted to record a duo with both parts played by myself but I can't get Logic EXpress 8 to let me hear the previously recorded Audio track while recording the second Audio track. I do have an Edirol UA-25 and thought i had it set up to make that possible.
If any of you know the answer I would appreciate it greatly to have an answer to such a basic operation, or is Logic so far behind that I will HAVE to upgrade to Leopard and buy Protools?

Hello,
as far as i know, the advanced mode of the EA-25 requires you to install the original Edirol driver. The simple mode has basic core audio support, but the advanced mode allows MIDI and more than 44.1 kHz.
However, you shouldn't deselect Advanced, if it works okay - leave it on!
Just look if the "Digital in" switch is set to off, and set the small selector switch for the sample rate at the back to 44.1 kHz. With these settings, you should be able to play back and record at the same time. If not, the problem is not the UA-25.
Fox

How do you record audio in imovie?

i'm trying to use the internal mic to record audio with video at the same time. like a youtube type video... everytime i record the video is fine but there is no sound whatsoever even though when i click the voice over button my voice registers.

ok, so maybe the problem is that imovie does not do what i want. can audio and video be recorded at the same time? i want to play and sing and have a video and audio recording; not a video of me playing and singing and then have to record a voice over of me playing and singing as well. that's just silly extra work...and i'd have to sing and play it exactly the same like i'm a voice over actor. which i'm not.

How do i record audio on macbook pro?

I've plugged a Blue brand "Yeti" USB microphone in, but this is my first time recording audio. What do I do next?

Your Mac should have come with GarageBand installed. You can use that to make recordings.
There are other good audio apps available.
Audacity is one, and it's free.
SoundStudio 4 is excellent, available in the App Store
WireTap Studio is also excellent (also does some things Audacity & Sound Studio can't do)

How do I send a printing job from a remote location to my photosmart 5514 printer

I have given my photosmart 5514 printer an email address. I can print successfully using the wireless network in my house. What more do I need to do to have it accept printing jobs from my iPone or laptop when I am in another remote location?

Hi,
You can send an email (including attachment) to its email address and it will print. Please note: it only supports the following format:
    Microsoft Word
    Microsoft PowerPoint
    Microsoft Excel (HP strongly recommends that you preview documents in Excel before printing)
    Text files (.txt)
    PDF
    HTML
    Images (bmp, jpg, png, gif, tiff)
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to digitally record audio? (iPad to MAC)

Hello,
I am generating sounds internally in my iPad 3 and I play it through the earphones. The thing is that I would like to record the generated samples in its digital form using a MAC Book Pro. We are doing it doing in its analog form but we are not achieving good results at low volumes.
How is the best way to get this?
We are managing 3 solutions here:
1- Instead of send the samples to the audio codec they could be sent to RAM and saved into an txt file or similar. Then this txt file could be loaded on the MAC.
2- We could route them to HDMI port using the dock and connect the cable to the HDMI port of the MAC.
3 - We could route them to USB port using the dock and connect the cable to a USB port of the MAC.
I don't think that the HDMI/USB ports of the MAC can act as a device (slave) and then record the digital samples in some file. Is it possible? How?
Regards.

Another way. You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Secrets of the iPad Camera Connection Kit
http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
 Cheers, Tom

How to compare record count of two tables?

Hi,
i am in need of simple sql script where i can compare two table record count.
i have something like below:
(select count(*) from table1) minus (select count(*) from table2)
now the problem is if the table1 count greater then table2 count the output is fine.
If the table2 record count is more then i am getting zero as the output.
how can i get the difference in two tables record count?
Thanks a lot in advance.
--Raman.

Doing a MINUS between the counts does not yield the diff.
e.g. if table A has 100 records and table B has 70 records then,
SELECT count(*) FROM A
minus
SELECT count(*) from B
will give 100 and not 30.
Try this:
SELECT (
CASE WHEN ((select count(*) cnt from A) - (select count(*) cnt from B)) <0
THEN ((select count(*) cnt from A) - (select count(*) cnt from B))* -1
ELSE ((select count(*) cnt from A) - (select count(*) cnt from B)) END) Difference
FROM dualor this is simpler
SELECT abs(((select count(*) cnt from A) - (select count(*) cnt from B))) difference FROM dualEdited by: Caitanya on Jan 9, 2009 7:12 AM
Applied abs function after seeing BluShadow's post :)

How do I record audio from movies on an iMac?

Hi, I would like to record pieces of audio from dvd movies in mp3 format on my mac, how can i do it?
I've tried with quicktime but the quality is bad, probably because quicktime also records enviromental sounds and noises. Any suggestions?

ciao,
use this simply tutorial
http://www.simplehelp.net/2006/09/09/how-to-extract-and-convert-the-audio-from-a -dvd-using-os-x/

Hp pavillion g7 how do I record audio from internal mic

i have a cassette player plugged into the mic, it plays but I can't figure out how to record

All windows operating system comes with an inbuild sound recorder.
Type "sound recorder" in the start search and they you can use the application to record any sound from the internal mic.
Let me know how everything goes.
Have a good day.
Clicking the White Kudos star on the left is a way to say Thanks!
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Let me know how everything goes.
Have a good day.
Clicking the White Kudos star on the left is a way to say Thanks!
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I record audio using Virus TI and Apogee Duet? What is the best set up?

I am running Logic 9 with Virus TI Snow and an Apogee Duet. I have been using the Virus sound card to bounce virus sounds to audio on logic 9 but want to record the audio through the apogee sound card. How do I do this? I have tried but cant seem to monitor the sound. What is the best setup?
Also does anyone know if it will make much difference in sound quality using the Apogee sound card as opposed to the Virus?

Hi,
I'm doing this from memory, as I'm not in front of my Mac right now.. but... The Apogee installer should have installed an "apogee" control panel app on your computer. [maybe re-install?].
In Logic's Menu, go to > Options> Open Apogee Control Panel, to open it [if it's properly installed...]
When you launch that app, it has an option on one of the screens to "monitor" your inputs and adjust levels in and out of logic and, bypass the latency that causes a recording delay when doing live vocals, etc.. You can find that how to do that if you get stuck, via goggle or on the Apogee site.
As far as which sound card option is better [Virus or Apogee] DEFINITELY Apogee. Apogee is "studio standard" for high quality sound in major digital studios world wide. I'm not saying the virus is bad, but Apogee is amazing.
I went back to my old recordings and mixes I did without the Apogee and was shocked at what I did NOT hear !
Definitely Apogee !
I have a Virus TI. When you run it as a plug-in in Logic, I believe you should be able to select and simply "render the track as audio" or "mix the solo track to disc and re-import it, directly bypassing any interface by going directly to disc [via the usb cable] for the highest quality sound. Again probably Google, YouTube [tutorial videos] or the Virus site has info or downloadable manuals or Logic tutorials..
Hope this helps !
-Man Parrish
Message was edited by: ManParrish

How do I record audio, and listen to it through headphones at the same time? Macbook Pro

When using midi, everything works great!
But now I want to record the audio from a piano.. I can't work out how to listen to what I'm recording?
The same slot is used for the output and the input, so I'm a bit stuck.

Hi, Jake.
Are you using an external sound card?
If so, go to system preferences under the apple in the top RH corner of the menu bar. Open sound and select thus device as your audio output.
OS X automatically defaults to the laptop's internal speakers ans mic input.
Hope this helps,
Regards,
Scorpii.

How do I record audio from the internet in AA CS6?

When I used AA 2.0 and 5.5... I was always able start recording a wave file... minimize AA and roll a song or interview on the internet and record it.
Now that I've upgraded to AA CS6 I haven't been able to do that.
I've intalled the latest ASIO driver for my Presonus Firebox sound card and can record from all other sources,.. turntable, cassette deck (don't laugh)... midi... etc.
I've double and quadruple checked my hardware and channel routing settings and all seem to be correct. Even tried a new fireware cable. So it just seems that even though I can hear mp3s and wavs coming from my PC through the sound card fine... the audio just isn't getting to Audition. When I monitor the input all I get is the noise floor reading.
I have a Gigabyte mother board with onboard Realtek HD audio... which is disabled... don't even think the drivers are installed for that. Could that be the problem. I have always been under the impression that on board audio should be disabled when your using an external ASIO sound card. One other thing I noticed is that when I go into control panel and open "sounds and audio devices"... all the ins and outs there match the settings in CS6 but on the first tab for "volume" the device volume slider is greyed out.
If any of this raises a red flag that I'm missing... please let me know what you think. I'd be indeed grateful
Thanks

Morning Bob.. thanks for your quick reply...
Sorry I didn't provide a profile of my set-up/signal chain
Actually I'm still one of the hold-outs... OS is still Win XP Pro service pack 3. I tied what you advised regarding "hidden devices" in sounds and device controllers but in XP there does not seem to be anywhere to right click to bring up the list of hidden devices.
As I mentioned my sound card is an external Presonus Firebox which is firewired to a firewire card in the tower... the Gigabyte mobo has onboard Realtek HD audio which is disabled.
I use the rear inputs and outputs of the Firebox and control audio levels with a Mackie 802 mixer. The only thing in my setup that changed was upgrading to CS6.
By the way, the recording problem goes beyond the internet. I used to be able to playback saved mp3s in realplayer, mediaplayer, etc and record them in 2.0 and 5.5. Most of those files were recorded as wav and converted to mp3 pro. I realize that CS6 does not support mp3 pro.. but even when I convert those files to mp3 I have the same problem on play back that AA CS6 doesn't get a level. But again, AA can receive audio from any other source I use.
Wondering if I should try reinstalling and enabling the Realtek HD audio drivers and seeing if that makes a difference. My uneducated guess is that will create a device conflict blocking AA from accessing the Firebox until Realtek is done.
Would appreciate your thoughts
Many thanks

How can I record audio playing on my ipad on my new macbook pro?

I am using a music app on my ipad without "sound export" capabilities. I want to record the sound using either a) another app on my ipad, or preferably b) by using the 1/8" port on my ipad to send the sound to be recorded via software on my macbook.
When trying the latter, I can't seem to get a signal. I tried all sound settings, the software called LineIn and Audio Hijak, and still no luck :/.
Any ideas?

You should be able to import photos using Image Capture (which is built in), iPhoto or Aperture. Are you using one of these programs without success? What happens when you try?
If the camera and computer simply aren't connecting, you may want to consider getting a card reader (or, if you have the right MacBook Pro and the right card, using the one built into the MacBook Pro), then pop the memory card out of the camera and connect it directly to the computer. This is a better option anyway, since it does not drain the camera's battery to transfer the photos.

How Do I Record Audio Into iphone 5

I'm looking for a way to do line in recoding through the headphone jack on an iPhone 5. I've downloaded FiRe 2 for this purpose but there are no settings to switch from the internal mic to an external mic. Their support has offered no solutions. I've also considered buying White Recorder and Pro Audio to Go but if I keep buying apps to test, I will have spent enough money to buy a dedicated recorder. I have the appropriate TRRS mic adapter cable from Sescom. My goal is to use the iPhone a s a field recorder for video shoots instead of purchasing a Zoom or Tascam recorder. I would also like to record live music events in stereo as well but the video application is most pressing now.
Thanks.
dp

My iPhone seems to automatically switch to an external mic when one is plugged in. The issue I find is that using the headphone port only allows mono recording because there is only one contact for the mic there (excluding the ground) To get stereo recording, you need to use a digital input, which goes through the dock/lightning connector. I don't know of any that are out for the lightning connector yet, but there are several options for using the dock connector.

How do I record audio of two people in remote locations?

Similar Messages

Maybe you are looking for