How do I record myself singing and playing and still be able to manipulate the volume of either the voice or the guitar? Or is that possible?

How do I record myself singing and playing and still be able to manipulate the volume of either the voice or the guitar? Or is that possible? I have a single mic.

GarageBand cannot unix audio files and split them into separate tracks.
Record the guitar and the vocals to separate tracks. If you only have one microphone, record both tracks separately, one after the other.

Similar Messages

  • I simply want to record myself reading a story and share it.  How can I do this?  How long can it be?  I find the interface not intuitive for this.

    I simply want to record myself reading a story and share it with others.  How can I do this simply?  I find the Garageband interface is not intuitive about this at all.  Or would the voice memo recording work better?  Thanks.

    Thoughtful
    You just need to adjust two default settings:
    Turn off the metronome and count-in in song settings.
    Set the Song setting section length to auto.
    You can now record a section without it being prematurely stopped.
    GarageBand has can record a maximum 320 measures (bars). At the slowest metronome setting of 40bpm and with a time signature setting of 4/4 (the maximum beats per measure) this gives a theoretical maximum of 32 minutes recording time.
    Hope this helps
    DM

  • How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

    How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo  and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no  effects is going thru?

    Hi Life93,
    What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
    See this thread on how to remove the audio from a clip in iMovie -
    Is there a way to separate audio from a video c...
    https://discussions.apple.com/thread/1779767
    To add audio from GarageBand use this article -
    iMovie '11: Add a sound clip to your project
    http://support.apple.com/kb/PH2255
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    How do I use my apple bluetooth keyboard with touch and will I still be able to use it with my ipad?

    iPod touch User Guide (For iOS 4.3 Software)

  • I have an external hard drive with a shared music folder, which I can access (from Home Sharing) and play music on my Windows computer. On my new Mac, I can see the drive in Home Sharing but not play any music. What's the solution?

    I have an external network hard drive with a shared music folder (WD MyBookLive), which I can access from Home Sharing and play music on my Windows computers. On my new Mac, I can see the drive and the music in Home Sharing but the tracks will not play. All the other authorized computers in my home network show up in Home Sharing and I can play the content. What's the solution?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • Every so often a music app will pop and play and I can't closed it unless I shut down completely

    Every so often on my IPhone 4 a music app will pop and play and I can't closed it unless I shut down completely. Why is this happening.

    Every so often on my IPhone 4 a music app will pop and play and I can't closed it unless I shut down completely. Why is this happening.

  • How do I get the volume on my ipod classic to the same level for all songs?  Some are louder than others.

    How do I get the volume on my ipod classic to the same level for all songs?  Some songs are a lot lower than others.

    Coverflow in iTunes is sorted by Album Artist whereas coverflow on the iPod classic is sorted by Artist. Unfortunately, there is no way to set this on your iPod. This is such a fumble on Apple's part that I'm beginning to think they're becoming another Microsloth with buggy firmware and products.

  • Since yesterday I'm unable to send emails alleging I have exceeded the maximum number of emails per day, but I had only sent out 24 and NO bulk emailing -  (much less than 1000 as per the website) and I'm STILL not able to send emails.Any advice?

    Since yesterday I'm unable to send emails on any of my Apple devices. The revert is that I have exceeded the maximum number of emails per day, but I had only sent out 24 with no bulk emailing -  (much less than 1000 recipients as per the website) and I'm STILL not able to send emails. Any advice on how to solve this?

    I have asked a moderator to provide assistance, they will post an invite on this thread.
    Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • How to compare records in singe internal table

    Hi Folks,
    iam having 3 records in my first itab( T_FINAL) with fields
    material no,  descrip ,  mat type and  group.
    and 16 records in second itab(T_MVKE ) with fields
    mat no ,  distri.chanel  and division
    now I want to fetch the records from T_MVKE  by comparing the records in
    T_FINAL .my requirement is to check the given mat no. in sales org.2000,2100.  if yes then i have to consider 2000 only, if it is in only 2100 then consider 2100 only . is it is in 2000 only then consider 2100 only
    my code is
    LOOP AT T_FINAL.
        READ TABLE T_MVKE WITH KEY MATNR = T_FINAL-MATNR.
       IF SY-SUBRC = 0.
       ON CHANGE OF T_MVKE-MATNR OR T_MVKE-VKORG.
    IF T_MVKE-VKORG = '2000' and SY-TABIX > 1.
          CONCATENATE '2000' 'TS' P_WERKS T_FINAL-MATNR INTO KEY.
    ELSEIF T_MVKE-VKORG = '2000' AND SY-TABIX = 1.
         CONCATENATE '2000' 'TS' P_WERKS T_FINAL-MATNR INTO KEY.
    ELSE.
        CONCATENATE '2100' 'TS' P_WERKS T_FINAL-MATNR INTO KEY.
        ENDIF.
    this logic fails ,. could tell me how to compare values in single itab?
    Thanks
    neha

    Hi ,
    if i've understand you correctly , try that:
    LOOP AT t_final.
      AT NEW matnr.
        CLEAR: v_2000, v_2100.
    *1) 2000
        READ TABLE  t_mvke    WITH KEY matnr = t_final-matnr
                                       vkorg = 2000.
        IF sy-subrc = 0.
          v_2000 = 'X'.
        ENDIF.
    *2) 2100
        READ TABLE  t_mvke    WITH KEY matnr = t_final-matnr
                                       vkorg = 2100.
        IF sy-subrc = 0.
          v_2100 = 'X'.
        ENDIF.
    *compare
        IF v_2000 = 'X' AND  v_2100 = 'X'.
    *read 2000 only
        ELSEIF v_2000 = ' '  AND v_2100 = ' '.
    *nothing found
        ELSE.
    *all other combinations
    *read 2100 only
        ENDIF.
      ENDAT.
    ENDLOOP.
    regards Andreas

  • How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

    How can I record an Audio Instrument, and listen to a reference track at the same time?

    Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
    If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
    Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

  • How to check whether music has finished playing and go to another frame

    I have a bunch of music samples which are set up to play on
    the click of a button, and at the same time go to another frame in
    the movie clip so it says 'playing', with a stop button that takes
    you back to frame 1. If you don't click stop, though, when the song
    ends, it stays on this second frame, even though there is nothing
    playing anymore, which is a bit confusing for the viewer.
    So I need to tell flash to check whether the song is finished
    playing, and then if it is, go back to frame 1. I have no idea how
    to do this; have basically done it all using tutorial and samples
    and my limited actionscript knowledge, but I can't find this
    particular code, and don't really have any idea how to write it
    from scratch.
    Many thanks!
    Here's my first frame actionscript:
    stop();
    this.createEmptyMovieClip ("mcSoundHolder",
    this.getNextHighestDepth());
    var mySound:Sound = new Sound (mcSoundHolder);
    btn_Song1.onRelease = function():Void {
    stopAllSounds();
    mySound.loadSound("Soaring1-Burlesque.mp3", true);
    gotoAndPlay("Song1");
    btn_Song2.onRelease = function():Void {
    stopAllSounds();
    mySound.loadSound("Soaring2-PopCyclePotpourri.mp3", true);
    gotoAndPlay("Song2");
    btn_Song3.onRelease = function():Void {
    stopAllSounds();
    mySound.loadSound("Soaring3-PopCycle-SongofLight.mp3",
    true);
    gotoAndPlay("Song3");
    and so on...

    I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
    So, yeah - good luck with that
    Lee

  • How do I record audio using Virus TI and Apogee Duet? What is the best set up?

    I am running Logic 9 with Virus TI Snow and an Apogee Duet. I have been using the Virus sound card to bounce virus sounds to audio on logic 9 but want to record the audio through the apogee sound card. How do I do this? I have tried but cant seem to monitor the sound. What is the best setup?
    Also does anyone know if it will make much difference in sound quality using the Apogee sound card as opposed to the Virus?

    Hi,
    I'm doing this from memory, as I'm not in front of my Mac right now.. but... The Apogee installer should have installed an "apogee" control panel app on your computer. [maybe re-install?].
    In Logic's Menu, go to > Options> Open Apogee Control Panel, to open it [if it's properly installed...]
    When you launch that app, it has an option on one of the screens to "monitor" your inputs and adjust levels in and out of logic and, bypass the latency that causes a recording delay when doing live vocals, etc..  You can find that how to do that if you get stuck, via goggle or on the Apogee site.
    As far as which sound card option is better [Virus or Apogee] DEFINITELY Apogee. Apogee is "studio standard" for high quality sound in major digital studios world wide. I'm not saying the virus is bad, but Apogee is amazing.
    I went back to my old recordings and mixes I did without the Apogee and was shocked at what I did NOT hear !
    Definitely Apogee !
    I have a Virus TI. When you run it as a plug-in in Logic, I believe you should be able to select and simply "render the track as audio" or "mix the solo track to disc and re-import it, directly bypassing any interface by going directly to disc [via the usb cable] for the highest quality sound. Again probably Google, YouTube [tutorial videos] or the Virus site has info or downloadable manuals or Logic tutorials..
    Hope this helps !
    -Man Parrish
    Message was edited by: ManParrish

  • How do I get read of I-Play and still keep Mozilla?

    I do not know how to uninstall I-play and still keep Mozilla.
    Please give directions.

    Sorry, there is no adjustment to let X% count as a Play.
    iTunes increments the play count at the end of the song.  You do not need to play the whole song;  just the last 2 seconds is enough.  However it will require you manually moving the slider near to the end and then letting it play out.  That will be prohibitive with your large library.

  • I have an iMac and play games on facebook. When I need to request parts from "my neighbors" the list does not appear in the box. When I use my daughters pc it works fine. Recently I had a pop up for an upgrade but don't remember what it was for. How can I

    I have an iMAC  and when I am on Facebook my list of friends does not show up in the box for me to request gifts. I know this is a problem with my Mac because my daughter's PC shows it. I recently did the automatic upgrade thing but didn't pay attention what it was. When I did that it changed my desktop picture back to factory. Could this have something to do with it and more importantly what do I do about it?

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • HT1420 How do I authorise my computer to play songs purchased with an old apple id for which I no longer have the password?

    I recently purchased a mac for my daughter. On transfering some songs to her machine from my computer, I was asked for authorisation which I provided.
    Some songs however, although they play with no problems on my other two machines, on HER computer asked me to authorise the songs with an apple ID and Password that I no longer have and haven't used in about 5 years. The e-mail ID is closed down now, and I can't remember the password.
    What do I do?

    All downloads from the store are tied to the account that downloaded them, so if those songs were bought by that old account then only that old account will be able to authorise them. If you can't remember the password but you know it's security info then you could try getting the password reset via this page : http://iforgot.apple.com - if you can then you can change the primary email address on it by logging into the account : http://appleid.apple.com
    If you can't get the password reset that way then you could try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
    Or maybe Apple : http://support.apple.com/kb/HT5699

Maybe you are looking for