How do I record only a select portion of the screen?
I can't seem to figure out how to record only a select portion of the screen.
QuickTime X screen recording feature doesn't offer anything except the entire display.
Similar Messages
-
I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?
Which magnifier tool are you referring to? If you double-tap with 3 fingers it should disable zoom. Then you can go into Setttings>Accessibility>Zoom and turn it off.
-
How do you zoom in on a portion of the screen in Captivate 8?
As the title says, I can no longer figure out how to zoom in on a portion of the screen using Captivate 8. Adobe, of course, had to change it from version 7. How does one go about doing it?
Zoom Area is under the big Objects button.
-
How to get physical number of selected row on the screen.
Hi,
We have block defined with Numbers of Records Displayed = 3. In the same time the data set contains 10 records. We would like to know how to get a number of row selected on the screen. i.e. in our case that the number will be always between 1 and 3 independent of the current row position in the data set.
Best regards,
Constantin.You can calculate that number by subtracting :SYSTEM.CURSOR_RECORD and GET_BLOCK_PROPERTY('BLOCK', TOPMOST_RECORD)
-
How does one print only a highlighted portion of a document?
How does one print only a highlighted portion of a document?
If the App supports that, it would be in the Print dialog. Otherwise, copy and paste the section into something else to print.
The OS doesn’t render pages to print, the App does. The App must support rendering the selection.
You can create an Automator workflow that automates the copy/paste/print/quit functions.
Just create an new Automator Service and make it look like this:
The text of the Applescript is this:
on run {input, parameters}
tell application “TextEdit"
print document of front window
close document of front window without saving
quit
end tell
return input
end run -
When I AirPrint The printer only prints a portion of the page. How do I get it to print the whole page.
It would help if you stated what printer you are using and what application you are doing the printing from. Also, what are you printing?
-
How to repaint only a portion of the Screen
We are developing Graphics based application where we need to call repaint method again and again. Now repaint method repaints the whole screen but we want it to repaint only a portion of the Screen. Is it possible ? if yes then how ?
Thanking You in Advance,
Ketanrepaint()
Repaints this component. This method causes a call to this component's update method as soon as possible.
repaint(int�x,y,width,height)
Repaints the specified rectangle of this component.
Noah -
picture size...in putting together a book I can move photos onto a page and enlarge the picture but is there a way to reduce the picture size? some cases I want a smaller picture and if I change the size of the picture box I only get a portion of the image. I want to reduce the image to fit the size of the box.
If you right click on the image on the page in the context menu select photo box alignment and then select one of scale to fit {centered, Left-aligned, Right-aligned}
That should do what you are loking for. -
How can I record with GarageBand 1.3 in the background using other app?
How can I record with GarageBand 1.3 in the background using other app?
I use iPad 2 with iOS 6 and GarageBand v1.3.
I'd like to play an other app like Sunrizer synth while the GarageBand is recording in the background in a track.
By now I can do it only using the build-in mic of iPad, but this is not the point.
Can I record other apps in a GarageBand track?
Thanks a lot for your time.I suspect you are probably correct about the reasoning, although there are already a myriad of ways to do that.
Don't get me wrong - I never said I like this. But it is consistent with other Apple applications, that are similar restrictive; you cannot take a screenshot, when dvd-player is running for example.
That are the moments, when I am glad that MacOS X is a unix system under the hood -
How to lock portions of the screen
I'm new to Contribute, having just downloaded a trial
version. The software seems geared toward the user who will be
making modifications to websites, not an administrator. How do you,
as an administrator/site designer, lock certain portions of the
screen so that users can't fiddle with them? Does this only work
with Dreamweaver templates?
The sites I design do NOT live on a server of mine. Each
customer finds their own host, so I cannot control access that way.
I also build very basic, barebones sites using tables and
external style sheets, and do all of my HTML coding from scratch. I
do not use Dreamweaver or any other WYSIWYG HTML packages, so I
don't work with templates. Can such locks be implemented using my
style of site design?
Thanks for any info. I searched the Adobe site but couldn't
find an answer.You could try faking a Dreamweaver template by copying DW
template tags (i.e. HTML comments) into your source pages. But DW
is a great page and site building tool and you can always try a
trial version of it. -
How to get the values of Select-options from the screen.
The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.
Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = zlv_dynpro
dynumb = syst-dynnr
request = 'A'
TABLES
dynpfields = temp_fields
EXCEPTIONS
OTHERS = 0.
LOOP AT temp_fields INTO dyn_field.
IF dyn_field-fieldname EQ 'S_PO-LOW'.
SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
WHERE ebeln EQ dyn_field-fieldvalue.
EXIT.
ENDIF.
ENDLOOP. -
my apple tv is not working, the only thing showing up on the screen is the apple box with a white usb cord connected to it under the hdmi plug in and next to it is an iTunes sign- how do i fix my apple tv?
Restore.
-
Is it possible to display only dynamically selected fields in the out put?
Is it possible to display only dynamically selected fields in the out put? i need to display set of columns in the selection criteria, but in the output i have display only input given fields. because i need to convert it into .csv file. So i have to display selected fields from internal table. In oracle they are using"execute immediate". is there any equivalent in SAP?
thanks in advance.Hi Remya,
Are you talking about dynamic programming in ABAP ?
If yes, there are concepts like RTTS which facilitates it.
Yes, the select query also supports dynamic selection of fields. ( Please care about ( ) in dynamic sql ).
Do more research on Field Symbols and statements like ASSIGN COMPONENT OF.
Regards,
Philip. -
How to create the select option in the screen
HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PMTry RANGES.
The RANGES has same structure as that of select-options. -
The airport icon (upper right portion of the screen) says I am connected to my airport; but, the Itunes window doesn't show the icon (rectangle with an arrow in it) that allows me to select the stereo system speakers that are attached to the airport. What's up with that?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues.
Maybe you are looking for
-
Stream photos in the same itunes library used to syinc.
It's possible or not ? Have sync photos in apple tv and want to see some stream photos in the same library
-
How to track the person who has stolen my macbook pro.
I have lost my mac recently. but just now i have received email thru my another device showing that the thief has been tried to ask the question in apple support community. He asked about how to access new operating system because it can't be open by
-
EAP TLS for machine and EAP PEAP for user
Hi forum I am doing a design to use ISE to enforece dot1x for corporate machinese on both wired and wireless. Due to the particular environment, we will need to use EAP-TLS for machines auth and on top of that use EAP-PEAP for user auth with windows
-
Not able to install Oracle 11g R2 client in windows 8 machine
Oracle universal installer window is not coming up in windows 8 machine, if any one installed Oracle 11G R2 client in windows 8. Please share those steps and if you have latest 11G client share that download link. Thanks in advance. Edited by: 969434
-
No documents created - in PRRW
Dear All, The following steps i have done: 01. In T-Code: TRIP - I created the Travel Request with Advance and Approved the same. 02. In T-Code: PR03 - I approved the Advance. 03. In T-Code: PR05 - I posted some expenses and it was settled in the sam