How do I record separate tracks through my Mixer in logic?

Hello All,
I am trying to record two seperate instruments at the same time into logic through my Xenyx Q502 USB Mixer so they are recorded on two sperate tracks (one track for microphone, the other for guitar) but am struggling as to how to do this. I have the Microhone in input one and the guitar in input two on my mixer. The problem that arrises is that both of these inputs record on the same track in logic and are not recorded as indivudal tracks. How do I make them record as indivudal tracks?
Thanks,
T.Hobbs.

TryfanH wrote:
Hello All,
How do I make them record as indivudal tracks?
Thanks,
T.Hobbs.
Stop recording on a stereo track!
Record on two mono tracks, one set to Input 1, the other set to Input 2
http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=39%26se ction=5%26tasks=true
You might want to go here and read.... "Exploring Logic Pro"
http://documentation.apple.com/en/logicpro/

Similar Messages

How to export multiple separate tracks as one song from Logic to iTunes?

I know how to export the separate tracks that i have recorded, but i want to be able to save all of the tracks into one song, in other words, i want to be able to take my recording from logic 8 and export the entire thing, not just separate tracks, into a file that iTunes can read. Any help/suggestions?

Select "Bounce" (upper right part of Logic arrange window) and make sure MP3 is check under "Destination". This will cause all tracks to be written to a single MP3 stereo file. However, if you have any tracks muted they will not be included in the bounce. Also, make sure no track is "Solo" else you will only get THAT track.
I am assuming that you have mixed all the tracks and done any "mastering".
Once the MP3 file is generated just drag it into iTunes, right click on the song, and then select Get Info and the "Info" tab to assign Artist/Album/etc.
It is very easy......

How can I record multiple tracks simultaneously?

How can I record multiple tracks simultaneously? Or rather what hardware do I need to do this? I currently run guitars and mic into a PA and then the PA into Garageband. But this is just one track. I want to record the guitar as one track while simultaneously recording vocals as another track. What hardware do you suggest - keeping it affordable?

if you want to use your two chanel PA, pan 1 channel to the left, and the other to the right, and set one GB track to Mono 1 and the other to mono 2.
if you want better quality, any two channel interface will work:
http://www.bulletsandbones.com/GB/Interfaces.html

How do i record 2 tracks at the same time.

i use a mixer to hook my mics into garageband, what i want to do is have 2 separate tracks and have them able to record at the same time. ive made separate tracks for each mic but i can only highlight one at a time to record so i need to figure out how i can have both tracks highlighted and giving me levels. if anyone can shed some light on this for me that would be great. i get the feel like theres a simple solution to this.

Nik324 wrote:
i use a mixer to hook my mics into garageband, what i want to do is have 2 separate tracks and have them able to record at the same time
http://www.bulletsandbones.com/GB/Tutorials.html#allaboutrecording2tracks
(Let the page FULLY load. The link to your answer is at the top of your screen)

Recording separate tracks

My apologies if this has been gone over numerous times - I've spent the past month attempting to get this answer from a variety of sources but have been wholly unsuccessful.
I'm recording vocals and guitar with two separate mics which I then run into a Presonus Firestudio (which has two inputs) which then connects to my laptop.
How do I get the two signals to separate into two separate tracks in Logic? They always combine into one track no matter how much I've played with the Audio Preferences. Do I need to be activating the Bus in some way?
Thanks so much for any assistance,
Scott

create MONO audio tracks and select "Input 1" for the first and "Input 2" for the second.
Now your two inputs will split to these two mono tracks, which can also be recorded together. If you want to apply stereo FX later, you can use a plugin that has a mono->stereo entry like the stereo delay or the gain utility.
Fox

How do I make separate tracks into takes in one track?

I want to know how to use quick swipe comping on separate tracks. If not possible, how do I merge those separate tracks as takes in one track so I can use quick swipe?
I am using logic pro X and finding comping very slow when trying to comp multi tracks.

Lasso-select (in one swoop) and/or cmd-select (one by one) all regions you want to include into the take folder, then control-click any of them and choose Pack Take Folder from the contextual menu.
http://help.apple.com/logicpro/mac/10/#lgcpb194093e

HOW DO I MAKE SEPARATE TRACKS????

I am a toddler teacher and I am trying to make a CD of the songs that we sing in the classroom. I recorded each song as a separate track but when I send it to itunes to record onto a CD it stays as one last track. PLEASE HELP!!!

solo each track before export (press the little headphone icon)

HT2508 How can I record my voice through my Mac?

How can I record my voice to my Mac?

Use GarageBand.
In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

How can I record 2 tracks simultaneously in GarageBand for iOS?

I am trying to record 2 tracks at the same time, one, a line in for my guitar and the other a vocal mic. I am using an Alesis i/o Dock with my iPad Air 2, everything is updated, and everything is plugged in correctly. When I select either track from the multitrack screen, I can see that both work appropriately. However, when I hit the record button, the screen goes from the multitrack view to the track that is 'highlighted' and the record process goes from there. So if the 'amp' (guitar) track is highlighted, the app take me from the view with both on it to the 'guitar amp' selection, showing the head that I selected. Now, in the past, I have recorded 2 tracks at the same time. I still have the original recording showing both tracks and their settings. Even when I try to match the setting (both were on Left Channel, for example) it doesn't work. On my recent attempt to record (the one this question is about) I put the mic track on Right Channel and the line in on Left Channel, and vice versa. I tried putting them both on the same thinking that maybe that's what I did before because the app might not be able to do both Channels at the same time. I tried using the Mic track in stereo and the Line In on Left and tried it on Right; nothing. Has GarageBand taken this feature out on iOS? I do see if I had a Mac there is an 'Enable Multirack Recording' box to check, but I don't see anything like that for iOS... Can anyone help??

in one the YouTube Tutorials, it is not possible in iOS. but hopefully in the later version it should be.

How do I record vocals from a USB mic on logic pro x

How do I record vocals on Logic Pro x using a USB mic

Honestly... have you bothered to read any of the Logic manual?
First you have to configure Logic's audio Preferences to set the USB Mic as the Input device, then create a few audio tracks.
There a plenty of online help videos on You Tube.

How do I record one track while listening to another?

I've recorded a guitar track. Now I want to layer vocals on top of it. Obviously, I need to hear the guitar track while adding the vocals. How do I do that in GarageBand? If GarageBand can't manage that, which program should I be looking for?

Spencer Lambert wrote:
I need to hear the guitar track while adding the vocals. How do I do that
you need do nothing, just create another track and record on it, all other tracks will play unless they are muted (or other tracks soloed)

How do I record multiple tracks while video remains visible?

Hi,
I need to create an additional audio track for a video. This will be a recorded voice over that is translating the original into Spanish.
I would like to do all of this in SoundtrackPro after "Exporting for SoundtrackPro" from Final Cut Pro. However, I cannot figure out how to record an additional track (not just record on top of the audio file). I'm probably going to have to do "takes," so I need tracks!
Would it be better to use GarageBand and watch the video on Quicktime (or on another monitor)? Or STP on another monitor?
I'm pretty open to the easiest way to do this and still get good sound. Any hints, tips, and ideas are welcome!
(Just a note: Once I get my recorded audio, I would like to have the original audio just barely heard beneath the translation...like on the Olympic documentaries. I know how to do this, I just thought I'd throw it out there to keep in mind...)
thanks,
theprincessspy

Hi,
You can add your video to STP.
Add additional tracks - Command-T.
Record on them.
Mix it.
Export your mix to QuickTime movie, or AIFF to import back into FCP.

How to append records in MSAccess through Java using JDBC:ODBC

Hello,
I was able to retrieve records from MSAccess database through JAVA over the JDBC-ODBC bridge.
If I want to append records to a table (for eg. photo1 table containing photono., length, breadth, area as
columns) I could not able to do so through JAVA.
I am using JTable with the above fields. The user is displayed with the JTable and he has to enter
data inside the JTable and press a button titled "Append". Then the JAVA program should append
whatever the user has entered in the JTable as a single record inside the MSAccess database.
Can anyone help me please?

hi i too am having similar problem. i am able to create a table in ms access through java but when i insert values i get a msg that it has inserted the values but when i check the table by opening ms-access there are no values in the table.
the insert statement i am using is
" insert into tk1 values(3,'tarun')"
further i tried using the methods commit, setAutoCommit etc with the connection object. -NO GO.
can you help me ?

How can I record a track off soundcloud so I can add a track?

I've been trying to get a friend's soundcloud into Garage Band so I can add another track. http://soundcloud.com/13-black-productions/tess-barr-blues-band-little-by#play The best I've been able to figure out is go to the download page where safari presents a playback bar. Then I press the play arrow, switch back to GarageBand audio recording, hit the record button, and let the song play. But I always miss the first few seconds of the playback.
If I try to start the GarageBand Audio recording first, then switch to Safari and start the playback, I see a red bar along the top of the Safari screen that says Garage Band is recording, but then the red bar flickers. When I check my recording, I find that GarageBand has stopped recording the playback at that flicker.
Also, the best settings I could figure out for recording from Safari were to add a whole bunch of bars, more than I need, turn of the metronome and count in, so I am ignoring the GB bar structure.

Download from soundcloud just gave me a playback bar with iPad Safari. But on a windows 7 desktop and Firefox, download from SoundCloud saved the SC file to downloads. Then I had to move the audio file from downloads to my music folders, then plug in the iPad to the desktop, sync, then the SC audio file showed up in Music on the IPad. Then GarageBand on the iPad copy from iTunes worked.

How can I record left track onto right track ?

Hi:
I have an old tape recording that is in mono on the left channel only.
I would like to to record the left channel on the the blank right channel so that there is a natural center channel output .
I have Toast 6 with jam but there is nothing that enables the transfer.
Any help would be welcome thanks, Greg

Ok I got the mono track and transferred it to itunes just fine.
However now I find that I can not do anything to it thru toast or jam
I wanted to clean it up (static) and cut the beginning, Toast 6 will not cut and jam will not accept the file AIFF.
Its not the end of the world because I can go and clean and cut the original and then transfer it thru garage band.
But it is a question in that if you transfer any garage band tune it is in some type of lock position because I also notice that there is no volume info available.
Thanks Greg

How do I record separate tracks through my Mixer in logic?

Similar Messages

Maybe you are looking for