How do I record something connected to the Line-in

I have something connected to the line-in on my iMac, how do I record it from garage band?

http://www.bulletsandbones.com/GB/GBFAQ.html#recordlinein

Similar Messages

How do I monitor clients connections on the time capsule?

How do I monitor Wifi connections to the Time Capsule (client mac address, IP, time, etc.)?

There is very little information displayed about clients in Mountain Lion.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Caspule icon
Look for Wireless Clients
Click on the ID number or Name to see more information

How can I put something in for the last Wednesday of every month

How can I put something in for the last Wednesday of every month

I don't believe there is such a custom repeat option with the iPhone's Calendar app, but if you are syncing calendar events with a supported calendar app on your computer or syncing calendar events over the air with an email account that supports it with an option to create such a custom repeating event with the online calendar, set up the custom repeating event there.

How do I create an interrupt on the PCI-DIO-96 from an external signal connected to the lines PC0 or PC3 of a port?

Hi everybody,
we are currently using the PCI-DIO-96 for data acquisition from an old AT-DIO-32F card. All PPIs and ports work in mode 0 (standard input/output). The manual mentions the possibility to create an interrupt from an external signal connected to the lines PC0 and PC3 of port C from a PPI. To get the interrupt I have connected my interrupt service routine to the PCI-DIO-96, enabled the master interrupt enable bit in the interrupt configuration register 2 and enabled interrupt enable bits of every PPI chip in the interrupt configuration register 1. The interrupt should be generated if a signal low-to-high transition occurs on th
e lines PC0 or PC3 of a PPI. We've simulated the signal low-to-high transition with an external voltage source connected to the line PC0. We actually saw in the memory that the line toggled from state low to state high, but no interrupt was generated. I don't have a guess what I am doing wrong. Perhaps anybody knows the solution of this problems.
Thanks and best regards.
Sven Jungnickel

You may want to try disabling your USB or IEEE-1394 host controller. It's possible that one of these devices could be on the same interrupt as you DIO-96 and causing the interrupt to not be serviced.
Regards,
Erin

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

I have an iPad MD371Y. Since when I installed the iOS 6 I'm fading problem with the WiFi connection. The line fall everytime the device go on automatic stand by (if i do not touch it for 5 min). Can somebody be of Help?

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Time Capsule and Time Machine: How can I force Ethernet Connection for the first backup ?

Hi,
How can I force the Time Capsule - Time Machine Couple to communicate via an Ethernet cable for the initial backup without changing the wi-fi configuration of the Time Capsule?
I do not want to change the wi-fi configuration of the TC because it appeared that I was not able to restaure it proprerly after a first "ethernet backup".
Please note that I do not want to use my TC to extend my wi-fi network nor create a new one. But, when I disable the wi-fi on the TC, as I want to restaure it, I only can see "expend" or "create a network" options within the wirless config page of AirPort Utlity; "Connect to a network" is not shown in the list!
Thx a lot for your attention,
François
MBP 15' mid-2010
OS X 10.8.2 (12C54)
Time Capsule end-2011 (2TB - v7.6.1)

You MUST change the TC mode to something other than join a wireless network.. because in that mode, TC turns off the ethernet ports.
The join a wireless network is hidden option because apple do not support it and it works poorly.
You can access it by holding down the option key.
You can also save the current settings and restore them after you finish the ethernet backup.
Please note using join means double hop wireless and your TC data speed to the Mac will be extremely slow.. this will also affect your other internet connections and any other computers on the wireless network as it will use most of the capacity for much longer period than directly connecting to the TC.
Basically that is why Apple do not support it.. it is lousy way to work a TC in a network.

How can i solve "Cannot connect to the iTune Store" issue on my iPhone?

Hi,
Frequently i'm getting alert message (Cannot Connect to the iTune Store) while use my valid Credential on iPhone 4 (even Itunes application) Setting-> iTunes & App Stores->. but same credential accepted other iPhones too why not in my iPhone 4. same way others Apple ID wouldn't accept in my iPhone 4. how can i solve this problem? please suggest me.
Thanks in Advance,
Suresh Balakrishnan.

Take a look at these instructions:
http://www.digitaltrends.com/mobile/how-to-make-ringtones-for-iphone/

How to setup BPEL JNDI connection on the application server

Hi
Can anyone tell me how to write a JNDI connection for my BPEL process? Currently we are invoking all my BPEL processes from a property file, but i need to call my BPEL process thru JNDI connection. Is it possible? If yes then How?
Has anyone got any idea? Please let me know
BTW, you need more clarification on the question, let me know please.
Thanks.
Deepak

Hi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like   rlgrap-filename.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command
call 'SYSTEM' id 'COMMAND' field unixcom
                  id 'TAB' field tabl[].
<b>Reward Points if Useful</b>
Regards
Gokul

Urgent: how to run applet which connected to the servlet?

hi frends:
i have written an applet on the server side and it supposed to pass parameters to my servlet and retrieve some info from the servlet.
i put both applet and servlet under tomcat../WEB-INF/classes. but when i run the applet from the web browser, there is no response from the servlet.
could anyone help me to solve this problem?
one more thing is i know that applet is able to connect to servlet, but how about java application? is it able to do so? if yes, is it also using URLconnection as applet? and how to run it?
i will be very appreciate if anyone can help me... thanx a million.

You can connect to the servlet from an application.There's a URL class in java.net that has an openConnection method. Then cast the return to an HttpURLConnection and use setMethod to set up as a post request.This may be the default if you call setDoOutput(true) on the URLConnection. Then you'll need to get an OutputStream and write properly formatted form POST data to it. It's also possible to encode your data on the URL, even when using the POST method, and this may be easier when doing it programmatically from an application. To send a get request you can append the name-value pair at the end of the url.

How do I close a connection when the session ends?

I have a website that is using JavaMail to display a user's mail through the browser. I'd like to keep the connection to the mail server open during the whole session that the user is logged in, in order to improve response time. The problem is, I can't detect if a user closes their browser so that I can close the connection to the server.
Is there a way for me to close the mail server connection when the session ends?
Thanks.

Create session listener, Impliment sessionDestryoyed
method with your connection close statements.I was wondering how to use the listener for a Servlet as well, what would you type in that method to close the connection?.
public class ServletListener
     implements
          ServletContextListener,
          ServletContextAttributeListener,
          HttpSessionListener,
          HttpSessionAttributeListener
public void sessionDestroyed(HttpSessionEvent arg0)
          //System.out.println( arg0 );
}

How to know where users connected to the network?

Hi,
I check on ISE monitoring to see the authentication status, i found out IP and device port left blank. What should i do in order i can track user is connected from wchich access switchport (all switch were join identity\ network device)
Somemore, how to track the enduser were connecting from which AP?
What i should i do on the ISE in order able to track on this particular info, thanks
Noel

RADIUS packets aren't going to show you what AP the client connected from, the RADIUS packets are exchanged between WLC and RADIUS server, if you have a WCS managaing your WLC you will be fine using the reporting, if not you'll need to set up some heavy logging from your WLC and work out a decent way to analyse it.

How far away can you connect to the internet from Airport Extreme (802.11n)

How far can i take my Laptop away from Airport Extreme (802.11n) and still have internet connection

According to:
http://www.apple.com/au/airportexpress/
They claim the Extreme has a 45m range:
"Suppose you want to connect to the Internet with your PowerBook in an area that lies beyond the 45 metre range of your AirPort Express or AirPort Extreme Base Station"
Will you be using all N devices? G?, B? or a combination?

How to upgrade to something other than the most recent OS

I am currently running Os 10.6.8. I would like to update, but I have a critical application that is only qualified for 10.8.2 and the current operating system is 10.8.4. Is there a way to buy something other than the current OS?

Apple updates the OS X installer at the Mac App Store with the latest version, and older OS X versions disappear. If you want to upgrade to Mountain Lion and you purchase Mountain Lion at the App Store, you will get the OS X Mountain Lion installer with 10.8.4 installed, so it will install 10.8.4, without any possibility to install 10.8.2.
You can try changing system files to look like you are using 10.8.1 and try applying the 10.8.2 update, but doing this you may damage OS X Mountain Lion

Network currently connected how ever one pc not connected to the internet

i have the wrt54gl and i got 2 pc's wired and ps3 connected wireless. my dell deminsion e520 was working fine yesterday however today I am unable to connect to the internet today. I reseted everything change the ports and still nothing for e520. But i am still able to share files thru-out the network even my ps3 could see my computer also. any suggestion?

As you have mentioned in the post, only you 1 PC is not able to go online through the router, an you all other computers are able to go online? If you have any Firewall or Antivirus installed on your computer, try disabling it,and then check if you are able to go online from your Dell PC. If still you are not able to go online then you may try Click on Start - RUN - CMD - "ping yahoo.com" and check if you are getting any replies, If yes then i feel it might be the problem with your Internet Explore.
Click on Start - Control Pannel - Internet Options - then click on the "Connections" tab and below click on"LAN Settings" and uncheck all the checkboxes and click on Ok.
Now open your IE and check if you are able to browse internet on your computer.

F4IF_INT_TABLE_VALUE_REQUEST - how can I return all values from the line?

Hi,
I'm using FM F4IF_INT_TABLE_VALUE_REQUEST to show a pop-up with my internal table values. The internal table has 3 fields, ATINN, ATZHL and a description field ATWTB. ATINN and ATZHL are needed to complete the unique table key, however this FM will only return the value of one field in any line I select.
How can I see all the values in the line I select in the return table?
My code is as follows:
DATA: tbl_cawnt LIKE cawnt OCCURS 0,
        wa_cawnt LIKE cawnt,
        BEGIN OF tbl_list OCCURS 0,
          atinn LIKE cawnt-atinn,
          atzhl LIKE cawnt-atzhl,
          atwtb LIKE cawnt-atwtb,
        END OF tbl_list,
        wa_list LIKE tbl_list,
        tbl_return LIKE ddshretval OCCURS 0,
        wa_return LIKE ddshretval,
        tbl_fields LIKE dfies OCCURS 0,
        tbl_dynp LIKE dselc OCCURS 0.
REFRESH: tbl_list, tbl_cawnt.
SELECT atinn atzhl atwtb
    FROM cawnt
    INTO CORRESPONDING FIELDS OF TABLE tbl_cawnt
    WHERE spras EQ sy-langu.
LOOP AT tbl_cawnt INTO wa_cawnt.
    CLEAR wa_list.
    MOVE: wa_cawnt-atwtb TO wa_list-atwtb,
          wa_cawnt-atinn TO wa_list-atinn,
          wa_cawnt-atzhl TO wa_list-atzhl.
    APPEND wa_list TO tbl_list.
ENDLOOP.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'ATWTB'
      dynpprog        = sy-repid
      dynpnr          = sy-dynnr
      value_org       = 'S'
    TABLES
      value_tab       = tbl_list
      return_tab      = tbl_return
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks!

Hi,
Use the structure DYNPFLD_MAPPING
With this internal table you can easily define that you want to return
other columns of the hit list in addition to field RETFIELD to the
screen.
In this IT you can MAP the screen fields to the serch help screen fields this has three fields
FLDNAME this is the field anme from the search help
FLDINH This has to be blank which would be field with the field value that you want to map
DYFLDNAME THis is the screen field name.
So here you can get the values for the other fields that you want which are on the search help just populate the name of the fields in FLDNAME.
Regards,
Himanshu

How do I record something connected to the Line-in

Similar Messages

Maybe you are looking for