How do I record vocals from a USB mic on logic pro x

How do I record vocals on Logic Pro x using a USB mic

Honestly... have you bothered to read any of the Logic manual?
First you have to configure Logic's audio Preferences to set the USB Mic as the Input device, then create a few audio tracks.
There a plenty of online help videos on You Tube.

Similar Messages

Distortion with USB mic and Logic Pro/Garage Band

I have read a ton of posts, but I have yet to find an answer to this question. I have a USB mic that used to work wonderfully before upgrading to Leopard. When I make a recording now, it usually works well for about 5 minutes, and then out of nowhere I get horrible distortion. I have read that if I changed the frequency from 48000Hz to 44000Hz it would correct the problem. It seemed to work, but the problem keeps coming back. If I switch the microphone profile from built-in mic back to USB Mic in Preferences>Audio, it corrects the problem for a little while. It happens in Logic, Garageband and any other program that I try to record to.
I read in a Leopard update note that one of the past few upgrades was supposed to fix this issue, but it hasn't been fixed for me. Does anybody know of any solution to this problem? I would be greatly indebted to you!

Nope. The larger buffer didn't work. What did work was running a cord out of the 1/4-inch jack from the direct box to a 1/4-to-1/8-inch adapter and then into the mic/line-in jack on my computer. I set GarageBand to use the built-in line-in and had no static problems. It's a stopgap until this gets fixed.
A post by LinuxMercedes on Oct. 3 at http://discussions.apple.com/message.jspa?messageID=8158914 may provide a solution.

TS5459 How do you get vocals from an ext mike/amp to record onto an audio track?

How do you get vocals (from an ext mike/amp setup to record decently onto an audio track? I had no problems doing this with my 2008 IMAC & Logic Pro Studio 8, but can't seem to do it with my new IMAC & Logic X. Very frustrating.

    The Korg 1600 doesn't seem to have a USB connection. It does have S/P DIF "IN" & "OUT", (which I have never used) and a SCSI site. With my older system, I had the IMAC 1st jack go directly to the Peavey or sometimes to one of the 8 imputs on the KORG 1600......so whatever I had prepared on LOGIC &/or ITUNES would play out. The 2nd IMAC jack connected to the MASTER OUT jacks on the back of the KORG 1600. The KORG 1600 acted as an interface. Vocals via microphone, or guitar, or instruments from the Triton Synthesizer went into the 1600 & recorded onto the Logic project Also on the back of the KORG 1600 was   MONITOR "RT & LT" output jacks that are connected to my Peavy mixer that in turn plays out through speakers.
    The Logic Preferences/Audio is as follows:        Devices is highlighted
                                                                          Output device: ;Built-in output
                                                                          Input device: Built-in microphone
                                                                          I/O buffer size: 128
   Thank you for trying to help me with this and for your patience. . (I'm good with music & other things, but not with computers.)

How to capture an image from my usb camera and display on my front panel

How to capture an image from my usb camera and display on my front panel

Install NI Vision Acquisition Software and NI IMAQ for USB and open an example.
Christian

How can I take music from an USB and transfer it to the iPod? It tells me use use itunes to sync but the music is on an USB drive. It had worked in the past. Tks

How can I transfer music from an USB drive to the iPod. I can see the music and play it on the computer, but the iPod tells me to use iTunes to sync. The music is not on iTunes. It has worked in the past.....tks

These are just playlists. The songs there are really not duplicates of the songs. They are just a different location for accessing them. Some playlists can be deleted, some cannot. Ones that are created by iTunes cannot be deleted. Ones that you create can be. The Recently Added and the 90's cannot.

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?

Tell my wife that!
This is the best I can do. This way you can use the 2011 MBA way to do things.
Look for the post from @jacktourist. (on page 2 about half way down) This seems to be the easiest.
There are a couple of more similar to this with pictures I've seen around but can't remember where.
Here's another search with added info. It's easier then it sounds.

I'm new to apple after years of MS OS! How do I transfer files from my USB memory stick to another USB memory stick? cheers

hi all, i've just switched to apple after many years using MS OS! I'm now using iMac desktop 21.5" with 2.9GHz processor and latest Yosemite software.
How do I transfer files from one USB memory stick to another USB memory stick on the iMac? cheers, linley94

Plug in the memory stick and it should open then create a New Folder and drag and drop the contents from the memory stick to the new folder you created. Remove the original memory stick all the information should be in the new folder you created. Now plug in the new memory stick with nothing on it when it opens drag the folder with the contents from the original memory stick folder and all into the new memory stick that opened and there you have it.
CHEERS
DON

How do I acquire images from my usb webcam ?

Hi all ,
How do I acquire images from my usb webcam (logitech quickcam express ) ?
I use Labview 7 .

Pedrus wrote:
> Hi all ,
> How do I acquire images from my usb webcam (logitech quickcam express)?
> I use Labview 7 .
This seems a very popular question coming up about once every week at
least. And there are many good answers in the developer Zone on www.ni.com
Check out:
Irene He's IVision Toolkit:
http://www.hytekautomation.com/Products/IVision.html
or
Pete Parentes WebCam library:
http://www.cs.unc.edu/~parente/labview/index.shtml
The first is a rather impressive Video Manipulation library with a
nice video capture interface to VfW too, and the second is a simple
video capture library to access any VfW compliant device.
Rolf K"
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How do I transfer photos from a USB (WIN7) to my imac

I saved all my photos on my WIN7 PC and trasferred them to a USB. How do I transfer them from the USB to my IMAC IPHOTO??

http://support.apple.com/kb/ph2356?viewlocale=en_us

How to pass record Group from Forms with DATA_PARAMETER to Reports Server

How to pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
When we use products on run time we are using data_parameter for passing record Groups to reports via run_product but now we have to use application server and reports server for same reports.
We met with <FRM-41214 Unable to run reports> for passing DATA_PARAMETER to reports server when used RUN_REPORTS_OBJECT.
How can we pass record Group from Forms with DATA_PARAMETER to Reports Server using RUN_REPORT_OBJECT?
Thanks,
Arif

Hi Mandeep,
Could you please tell me how can i pass data parameter from forms to report through run_product.

How do I import music from a usb to itunes

How do I import music from a usb to itunes

Drag it to the internal drive, and from there into the library in the open iTunes application window.
(91735)

How do I record music from Itunes to a dvd to play on a Sony DVD player dvp sr500h?

How do I record music from Itunes to a dvd, that shows it is finishing but will not play on my hardrive or on a Sony DVD player, dvp sr500H?

If you are burning a DVD directly from iTunes (a feature which is present in older versions of iTunes but which was removed in iTunes 10.4), that creates a computer-type DVD for backup only and cannot play in any DVD player I know of. If you want to create a disk that can play in a DVD player, you'll need to burn an audio CD, an MP3 CD if the player will accept MP3 CDs, or use some other software.
Regards.

Getting clean vocals from an xlr mic using macmice micplug

I have a 1 ghz powerbook using FCP5 and garageband 2. I have a sennheiser ME66 mini shotgun mic. I wanted to try recording audio from my Sennheiser mic so I bought a macmice micplug (xlr to usb)
I've tried recording audio into FCP5 and garageband, but I get a lot of noise behind the voice track.
Has anyone used the micplug with success, getting clean professional quality audio?

Something like this XLRmic-to-USB preamp should do the job OK.
http://www.amazon.com/MXL-MICMATEC-Preamp-Condenser-Microphones/dp/B000VZ8WC2
However, the ME66 is not really a voice mic - it's a directional shotgun, with too much gain for close-miked voice (but you probably know that!)

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

Any ideas on how to control the amount of sustain pedal data that Logic Pro 9 records? Every time I press the sustain pedal down, it records 4 sustains. Same thing when I release the pedal. Thanks!

This gets confusing, you have two Macs with different issues and two pedals with different issues? First let's sort out what's what. So, do the issues come from the pedals or from the Mac software? To find out, simply switch the pedals and note their behaviour. No change: it's the software, change: it's the pedals (imho the most likely scenario).
Second, what kind of pedals are they? Can you name the type of pedal too? The Yamaha what and the Mgear which?
Third, with the 4 fold data problem, are the doubled events simultaneous, or a few ticks apart, or more?
Also, you have no MIDI keyboard? Are the pedals both "standalone"?
I think you have to sort this problem at its' source, which are the pedals. You could, if push really comes to shove, perhaps create some sort of ingeneous/elaborate transformer setup in the environment to filter the extra messages, although with the 4/4 sustain events that may not even be possible. With the "stepped" events you could set up a filter to just block all events with values 20-110 or so.
But much better would be to configure the pedal(s) correctly.

How do I install CS5 from CDs into my new MacBook Pro?

How do I install CS5 from CDs into my new MacBook Pro?

Buy a cheap external DVD drive, connect via USB and then install
Download CS5 Trial version from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html then activate with your CS5 serial number to convert to a permanent version

How do I record vocals from a USB mic on logic pro x

Similar Messages

Maybe you are looking for