How do I record vocals with an existing music soundtrack?

I have been asked to sing for a funeral tomorrow. It's my grandfather's funeral and it's just not possible emotionally for me to get through it. I am attempting to use a music soundtrack which I've purchased to record the song and vocals in GarageBand. For some reason the vocals don't record with the music and vice versa. Any help you can give is greatly appreciated. The service is tomorrow.

Check, if you have set any effects on your Master Track (Track menu > Show Master Track. Then click the Smart Controls icon. )
I started my sample project from an empty project to avoid any presets.
Check, if selecting a "Voice" patch for your vocal track will help. Select the track, then open the Library and try the different "Voice" patches. Perhaps "Classical Vocal" will sound good for the occasion.

Similar Messages

How do I record vocals from a USB mic on logic pro x

How do I record vocals on Logic Pro x using a USB mic

Honestly... have you bothered to read any of the Logic manual?
First you have to configure Logic's audio Preferences to set the USB Mic as the Input device, then create a few audio tracks.
There a plenty of online help videos on You Tube.

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get

Can anyone help me figure out how to sync my ipod with my purchased music? I have used several computer and at one point synced my ipod with a computer that only had about half of my music. My other computers are no longer working. Not sure how to get my purchased music back onto my ipod?

Hi kimcinma!
Your previous purchases are saved on iCloud even if you bought them on another computer. If you can't find them on your current computer, you might need to unhide them. Go to iTunes preferences, and click on Store Preferences. Then click the box for "show iTunes in the Cloud purchases". Then click on OK, and everything you've ever bought from iTunes on that Apple ID will show up in your library. You will need to download them from iCloud first before you can synch them to your iPod Classic. To do this, click on the little cloud with the arrow in it next to your song, and it will download to your computer. When you have the music that you want downloaded, plug in your iPod and synch away. Hope this helps!
Sandygirl

Logic Pro X - How do I record my voice over existing tracks (via a mike and audio interface) without hearing those tracks on the speaker. I have headphones plugged into the interface but it doesn't stop in coming out of the speakers?

I'm new to Logic Pro X and can't work out how to record my voice over existing tracks without them playing over the speaker. I'm using a Sure mike through an audio interface and have headphones plugged into the interface?

Hi Kevin, what kind of audio interface do you have?

Air or Pro for Recording vocals with GarageBand or PT and Producing

I'm considering buying a MacBook and would like to get a new Air. I will be using it mainly for recording my vocals on beats that I have bought on iTunes. I'm also going to be taking a couple of Coursera classes on music production. Can the new Air's handle GarageBand or Pro Tools well? I've been using my iPhone 4S with GarageBand to record but I would like to do more editting of my vocals with Pro Tools. The reason I like the Air is b/c it is light and easy to transport.

One thing with vocalists, I can think of, is to show them the input device, and have them watch the clip meter. After a few takes, if they are somewhat savvy at singing into a mic, they'll start to back off on strong notes, and moving in on subtle notes. If you watch a pro singer on stage, you'll see them pulling the mic in close for soft stuff, and backing it way off for the strong notes. In the studio, the same techniques can be used, but the person has to back away, rather than a hand held mic pulled away.
Hardware can help this to an extent, but the singer has to take some action to get the best performance recorded. If I were going to use hardware, it'd probably be limiting more so than compression. Limiting can keep your signal under control, without doing too much to the dynamics. I'd prefer to save compression for post, so I can decide what sounds best. I used to have a female vocalist with an amazing voice. i was NEVER able to capture her properly on tape, since I had no pre processing at all. She is still in this area, and I have invited her to come record some vox for me, because I want to see if I can now get a grip on them. If I ever do, she'll be featured on an upcoming CD

Recording Vocals with Ozonic

I am trying to record Vocals through my new M-Audio Keyboard (Ozonic). I have no problem with having the controller do the software instuments. I am going directly into the keyboard with my my XLR and have signal. I am trying to monitor the track with the headphone outs on the Ozonic butI am not getting anything through the phones. Any ideas? Thanks
MP

hi mario
I have the same problem and read about others that have also the problem. I don't know if it's a hardware problem or firmware bug.
Do your hear sound over the A and B channels? I do.
What M-Audio driver are you using? I'm using 1.8.2
harald

How do you record vocals in song made of loops?

I make a song using strictly loops. How can I add vocals?

And use headphones to monitor your loop track, don't want to record first track on the second.

Recording vocals seperate from main music Mac

I do most of my music on a Mac Pro, running Logic Studio 9, but the location of the computer really isn't a suitable space for recording vocals in.
I can't keep lugging the Mac Pro about, so ideally I'd like to record the vocals in a suitable (different) space on to a laptop, then import the resulting audio files to the main project on my Mac Pro.
The idea is that I'd do a stereo reference mix of the music in Logic Pro, bounce it and copy that audio file to a project on the laptop (using Garageband or Logic Express to save cost).
With that project set up at the same tempo and sampling rate, I'd then record the vocals using the laptop. From there I'd copy the vocal audio file(s) and drop them into the music project on the Mac Pro, where I'd add any effects, processing and do the final mix.
First question - would this work? As long as I recorded the vocals in a project set to the same tempo and sampling rate as the music, would I have any timing or sync problems when adding the vocal audio files to the original music project?
Second question - if so, can anyone recommend any portable, Firewire 800 audio interfaces which would be suitable for recording the vocals on to the laptop? It would ony need to be 2 input channels maximum, but with at least one XLR input and phantom power.
Any advice gratefully received!

but the location of the computer really isn't a suitable space for recording vocals in.
Is there any other room that would work better at your location? If so, consider buying a snake.
The idea is that I'd do a stereo reference mix of the music in Logic Pro, bounce it and copy that audio file to a project on the laptop (using Garageband or Logic Express to save cost).
Or reinstall Logic Pro on your laptop, but without all the content. Your license permits this, as you're not using two copies at the same time.
First question - would this work?
Yes. I do this often. Just be sure that both files begin at 1 1 1 1. Additionally, as I usually have many takes tracking o'dubs, I always record to WAV (BWF) files so I can use the 'move to original record position' command to align less than complete audio files.
Second question - if so, can anyone recommend any portable, Firewire 800 audio interfaces
Most FW interfaces are FW400. Just get an [adapter.|http://www.sonnettech.com/product/fw_adapter.html] and buy an interface which can be separately powered. There are dozens of suitable FW interfaces: one inexpensive box which I like is the [AudioFire4|http://www.echoaudio.com/Products/FireWire/AudioFire4/index.php] which is 6in/6out - they make an Audiofire2 but that doesn't have XLRs. Apogee, Focusrite, Presonus etc. all have small interfaces which you might like - just [search around|http://www.sweetwater.com/c683--FireWireAudioInterfaces/low2high]. Personally, I would avoid M-Audio.
Good luck.

How do I find and include pre-existing music files on my PC?

I'm new to iTunes and believe that I should be able to find and include pre-existing music files on my PC?
I've found out how to show the menu bar but I can't see how to do the above except file/folder by file/folder.

Hello there, LeighCenturion.
The following Knowledge Base article provides instruction on how to add content from your computer to iTunes:
Adding music and other content to iTunes
http://support.apple.com/kb/HT1473#2
Specifically:
Adding content on your computer to iTunes
iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
Open iTunes
From the File menu, choose one of the following choices:
MacAdd to Library
Windows
Add File to Library
Add Folder to Library
Navigate to and select the file or folder that you want to add
If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to create new genius playlists from existing music in library?

I tried the genius button for creating lists from existing music in my library. The problem is that it continues to show the first list created no matter what song I highlight then hit the genius button. Genius works fine for creating lists I can purchase online, but not new ones from my own music.

This is the iTunes for Mac forum.
As you are running Windows you will probably get a better response from posting in the iTunes for Windows forum:
http://discussions.apple.com/category.jspa?categoryID=150

Does anyone know how I can record continuously with my Ipod Touch 5g?

Hello everyone, I'm trying to make my ipod touch as a dash cam for my daily drive. I wanted to my ipod to atleast record for 40 minutes while driving, but it keeps stopping using the regular camera app. Even with dash cam apps, they still give me problems, or they are set to certain recording time. Your help is greatly appreciated.

Too little for what?
Do a test to see how longe 18 GB lasts. Based on Apple_iOS4Life 180 MB/min that would get you 77 minutes.

How can I record narration with no video or beyond the end of my video in iMovie?

I have a question about recording narration in iMovie.
I wrote a script to read as the narration for a movie I'm making. My thought was I could record the narration first, then add video to match the spoken words.
I've done this before in Sony Vegas on my PC and it worked out well, better than trying to speak to what was going on in the video after I record the video.
Unfortunately, if I try to record narration in iMovie without any video being there yet, it won't record. It appears I need to put a video clip on the timeline first.
If I put a short clip in and try to record narration beyond the end of it, iMovie quits recording at the end of the video clip.
So I went to quicktime and recorded my narration there and have 10 audio files (since I just don't seem to be able to read this whole script without making mistakes).
I then tried to add all 10 to my movie and I think it made me add a video clip first, but after I did, iMovie overlayed all 10 audio files on top of each other.
If I try to drag them over one at a time, I still can't get them to go sequentially unless I add more video to my movie.
There must be a way to add audio files or create narration without having to create a video file longer than your audio first. Isn't there?
I just can't seem to find a way to get the audio files layed out one after another without more video. Very frustrating.
At this point, I really want to know how to add audio files beyond the end of my video since I have them all recorded.
But I'd also like to know how to record narration beyond the end of the video too for future projects.
Thanks!
Brad

You could insert a bunch of placeholders in the timeline before doing the voiceover.
You can find a range of placeholders (they are actually templates used in iMovie Trailers) in the Maps, Backgrounds & Animatics browser. This is the last browser at the end of the centre toolbar, after the Titles and Transitions browsers. Click on it and scroll down to see all the animatics (aka placholders or templates). Drag a number of these into your project timeline - as many as you think you need to cover your audio.
When you've finished the voiceover, drag photos directly onto the animatics and select Replace from the pop-up menu. Adjust the timing by using the Inspector (double-click a photo to open the Inspector, then change the duration).
John
EDIT: Sorry, beaten by Bengt (again)!
Message was edited by: John Cogdell

How to delete iCloud account, with non-existing email as ID, on iPad?

Cannot delete iCloud account (which happens to have a non-existing ID) on iPad in order to have same account as on iPhone - keep trying using current Apple ID and PW but to no avail - iCloud settings continue to insist that Apple ID/PW is wrong but they are the ones I have in "manage my ID"???

If the ID is your the iPad is signed into is your old ID, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPad on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

IMovie how to replace recorded tracks with music from your hard disc

I would like to remove the sound originally recorded on my video clips with music on the hard disc.

HI
I would just set audio on clip to zero and add the wanted audio. Either as backrgound or dropp audio file onto the Video-clip to get it to connect to this.
Yours Bengt W

How do I record vocals with an existing music soundtrack?

Similar Messages

Maybe you are looking for